sal_paradise Posted June 4, 2007 Posted June 4, 2007 Hello, I've gotten the same error twice trying to finish up the writing a .iso file. These are final few entries in the log just before it ejects: I 20:36:06 Closing Track... I 20:36:07 Finalising Disc... I 20:37:45 Image MD5: 9cd99dc56c59ae2fbb1a7f2f8ba1df92 I 20:37:48 Operation Successfully Completed! - Duration: 00:04:10 I 20:37:48 Average Write Rate: 2,948 KB/s (2.1x) - Maximum Write Rate: 3,538 KB/s (2.6x) I 20:37:48 Cycling Tray before Verify... W 20:37:53 Waiting for device to become ready... Then, if I put the DVD back in the drive, the following is output: I 20:44:54 Device Ready! I 20:44:57 Operation Started! I 20:44:57 Source Device: [0:0:0] PHILIPS DVD+RW SDVD6004 1.03 (D:) (USB) I 20:44:57 Source Media Type: DVD+R (Book Type: DVD+R) (Disc ID: PRODISC-R04-04) (Speeds: 2x) I 20:44:57 Image File: C:\Documents and Settings\Sir Wilson.CODY\My Documents\My Videos\Torrent\completed dowloads\Sopranos S04E08.iso I 20:44:57 Image File Sectors: 178,368 (MODE1/2048) I 20:44:57 Image File Size: 365,297,664 bytes I 20:44:57 Image File Volume Identifier: completed dowloads I 20:44:57 Image File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER! I 20:44:57 Image File Implementation Identifier: ImgBurn I 20:44:57 Image File File System(s): ISO9660, UDF (1.02) I 20:44:57 Verifying Sectors... (LBA: 0 - 178367) E 20:45:45 Failed to Read Sector 0 - No Seek Complete E 20:45:45 Failed to Verify Sectors! E 20:45:45 Operation Failed! - Duration: 00:00:48 I 20:45:45 Average Verify Rate: N/A - Maximum Verify Rate: N/A Thanks in advance for any help!
kevdriver Posted June 4, 2007 Posted June 4, 2007 Sal, The tray will automatically open and close before it begins to verify. This happens right after a completed burn closure and the actual verifying stage. Is it not doing this or ejecting and not reclosing to begin verify? Next time just post up the complete log so we can double check the whole process up to the problem.
LIGHTNING UK! Posted June 4, 2007 Posted June 4, 2007 Your drive is just creating burns it can't then read back properly. To start with, update your drives firmware to v1.06 http://forum.rpc1.org/dl_firmware.php?download_id=1681 Then try finding some decent DVD+R discs. We recommend Verbatim / Taiyo Yuden. Go for the 8x ones as that's all your drive will cope with.
Recommended Posts