pussyluvva Posted June 11, 2007 Share Posted June 11, 2007 i've burnt a good few dl dvd's until my pioneer 111 started getting errors at 51% ....normal dvd-r burnt fine i thought it was my burner on its way out so i bought a pioneer 112 today fitted it and i'm still getting an error and still at 51% i uninstalled imgburn and re-installed it but i still get the same errors....(invalid address for write) any help appreciated Link to comment Share on other sites More sharing options...
dontasciime Posted June 11, 2007 Share Posted June 11, 2007 check both writers for a firmware update Link to comment Share on other sites More sharing options...
volvofl10 Posted June 11, 2007 Share Posted June 11, 2007 a log may help as well Link to comment Share on other sites More sharing options...
pussyluvva Posted June 12, 2007 Author Share Posted June 12, 2007 updated my firmware and i'm still getting the same problems i have also used discs from different batches to illiminate the possibility of it being a bad batch of discs....i've taken pics of the errors if i could post them here i would Link to comment Share on other sites More sharing options...
Shamus_McFartfinger Posted June 12, 2007 Share Posted June 12, 2007 Post your logs so we can see what's going on. Help menu > ImgBurn Logs Link to comment Share on other sites More sharing options...
pussyluvva Posted June 12, 2007 Author Share Posted June 12, 2007 Post your logs so we can see what's going on. Help menu > ImgBurn Logs hi i just copied log and pasted here hope this is what you need .... thanks again ; //****************************************\\ ; ImgBurn Version 2.3.2.0 - Log ; Tuesday, 12 June 2007, 11:01:43 ; \\****************************************// ; ; I 10:22:50 ImgBurn Version 2.3.2.0 started! I 10:22:50 Microsoft Windows Vista Home Premium Edition (6.0, Build 6000) I 10:22:50 Total Physical Memory: 1,571,776 KB - Available: 951,860 KB W 10:22:50 Drive G:\ (FAT32) does not support single files > 4 GB in size. I 10:22:50 Initialising SPTI... I 10:22:50 Searching for SCSI / ATAPI devices... I 10:22:50 Found 1 CD-ROM and 1 DVD Link to comment Share on other sites More sharing options...
Shamus_McFartfinger Posted June 12, 2007 Share Posted June 12, 2007 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D00-01) (Speeds: 2.4x) A power calibration error is usually caused by bad media or an incompatibility with your drive and media. Get some Verbatim DL media. They're the only ones we use and should fix your problem. Link to comment Share on other sites More sharing options...
pussyluvva Posted June 12, 2007 Author Share Posted June 12, 2007 (edited) Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D00-01) (Speeds: 2.4x) A power calibration error is usually caused by bad media or an incompatibility with your drive and media. Get some Verbatim DL media. They're the only ones we use and should fix your problem. thanks for your help shamus i'll try and buy some verb's today....will post how i get on got 2 verb discs as the shop only sells them as singles......and i've burnt one and it burnt fine no problems...thanks for your help shamus ,you're a star Edited June 12, 2007 by pussyluvva Link to comment Share on other sites More sharing options...
Recommended Posts