spencer Posted June 26, 2007 Share Posted June 26, 2007 Everything used to work fine, but now I cant burn anything! It come up with an error message before it can finish. I have tried the verify option & burning at a lower speed. Any help would be gratefully received. Spencer. Here is a copy of the log. ImgBurn Version 2.3.2.0 - Log ; Tuesday, 26 June 2007, 22:32:43 ; \\****************************************// ; ; I 21:33:23 ImgBurn Version 2.3.2.0 started! I 21:33:23 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 21:33:23 Total Physical Memory: 785,888 KB - Available: 383,080 KB I 21:33:23 Initialising SPTI... I 21:33:23 Searching for SCSI / ATAPI devices... I 21:33:23 Found 1 DVD-ROM and 1 DVD Link to comment Share on other sites More sharing options...
blutach Posted June 26, 2007 Share Posted June 26, 2007 CMC MAG. AM3 Change these to Verbatims or Yudens. The blanks you are using are highly inferior. Maximum Write Rate: 2,436 KB/s (1.8x) Since your write rate is low, check that your DMA is on. Plus, it appears you may be doing other things while burning (the drive is waiting to get data). Maybe let the PC alone. Regards Link to comment Share on other sites More sharing options...
Recommended Posts