Dual layer writing woes

[fanni]

Wonder if any of you can help me as this is seriously doing my head in now

 

I have a Pioneer DVD-112 and am using imgburn i have no problems writing to DVD-r or + R but when i burn dual layer disc everything seems to be going fine and completes perfect all until you verify what is on the disc and i get this response everytime

 

Firstly here is the Log

 

I 21:45:33 ImgBurn Version 2.3.2.0 started!

I 21:45:33 Microsoft Windows Vista Ultimate Edition (6.0, Build 6000)

I 21:45:33 Total Physical Memory: 2,095,680 KB - Available: 1,383,200 KB

I 21:45:33 Initialising SPTI...

I 21:45:33 Searching for SCSI / ATAPI devices...

I 21:45:34 Found 1 DVD-ROM, 1 DVD

[cornholio7]

use verbatim media only for dual layer

[fanni]

use verbatim media only for dual layer

 

I've used loads of these discs and never had a problem up until now i'm using

http://svp.co.uk/products-solo.php?pid=2026&prepg=1

 

I've also tried using my other writer which is a Tsstcorp CD/DVDW SH-S183A and get the same i/o error but at 53%

 

Could it be down to my something on my board and those pesky jmicron drivers

[cornholio7]

Could it be down to my something on my board and those pesky jmicron drivers

 

i have no problems writing to DVD-r or + R

 

use verbatim media only for dual layer

[dontasciime]

Use Verbatim once then see if you can rule out the board/ide/chipset etc.

 

 

It's a simple choice spend a little more get perfection save a few and pull your hair out.

[fanni]

Well have to say you were both spot on i opened up another pack of discs (same type) and am now back to having no problems

 

Time for a refund i think

 

Thanks for your help guys

[dontasciime]

Sarcasm eh

 

You'll be back Fanni

 

And just so you know it's failing to verify at switching layers co's the discs are shit.

[blutach]

You'll be back Fanni

Maybe Fanni is Arnie? :D

 

Regards

[dontasciime]

Or I was spot on first time