dontasciime Posted August 2, 2007 Posted August 2, 2007 Which drivers are listed under device manager. This is what mine looks like. I also ran ImgBurn and used cmc mag media (not known for being the best media) and opened loads of windows a few instances of my computer, paint, websites and not a hint of any slowdown/ issues burning etc. I 15:56:55 ImgBurn Version 2.3.2.0 started!I 15:56:55 Microsoft Windows Vista Ultimate Edition (6.0, Build 6000)I 15:56:55 Total Physical Memory: 2,094,976 KB - Available: 1,642,396 KBI 15:56:55 Initialising SPTI...I 15:56:55 Searching for SCSI / ATAPI devices...I 15:57:05 Found 1 DVD-ROM and 1 DVD
burgemaster Posted August 3, 2007 Author Posted August 3, 2007 wow thanks mate loads of info there...... my vista machine is now dead lol, i tried the nvidea drivers and it freezes just after the scrolling vista logo... Will have to do a fresh install now. Will post results! thx
dontasciime Posted August 3, 2007 Posted August 3, 2007 Make sure you go into bios and Disable SILICON IMAGE SATA II These are under Onboard device configuration. Under serial ATA enable Serial ATA Controller And Disable RAID Then Enable the SATA ports you are going to use.
burgemaster Posted August 3, 2007 Author Posted August 3, 2007 Reinstalled, tried vista 64bit this time, every driver installed itself which is new, and now it works Now my drive says (Fibre) after it? thx for the help I 17:34:40 ImgBurn Version 2.3.2.0 started! I 17:34:40 Microsoft Windows Vista Ultimate Edition (6.0, Build 6000) I 17:34:40 Total Physical Memory: 2,095,040 KB - Available: 1,417,200 KB I 17:34:40 Initialising SPTI... I 17:34:40 Searching for SCSI / ATAPI devices... I 17:34:40 Found 1 DVD
burgemaster Posted August 4, 2007 Author Posted August 4, 2007 (edited) Just installed Daemon tools and ITS BACK !!!!!!!! The Drivers seem to be the same as yours? Edited August 4, 2007 by burgemaster
dontasciime Posted August 4, 2007 Posted August 4, 2007 Using which disc's. maybe what your installing after is causing you trouble. What is jungo. [edit] never mind thought it looked familiar, if it is pcix/usb stuff maybe that is causing the issues What size psu have you got in ? and regardless of Watts what ampage is the 12 v line (normally on the sticker of psu) [edit] and your drivers are not exactly the same as mine... look under atapi
burgemaster Posted August 6, 2007 Author Posted August 6, 2007 (edited) Hi there, PSU is a Viper 600watts. The Jungo is a driver for a card reader. Im pretty sure that Vista updated my drivers for me when i shut down, i think that it is installing updating drivers that dont work. I will try again, if not will reinstall.... Just updated drivers and there back to the same section as you now????? Edited August 6, 2007 by burgemaster
Recommended Posts