Relentence Posted August 8, 2007 Posted August 8, 2007 Using another CD recording program, I burned on ISO to a 4x CD-RW disc. The burn completed and then the program automatically verified the disc taking a couple of minutes. It reported the read speed on verify as 24x speed. Using Imgburn 2.3.2.0, I burned another ISO to the same type of 4x CD-RW disc. The burn completed and then Imgburn automatically verified the disc at 4x speed taking almost 20 minutes.
Relentence Posted August 8, 2007 Author Posted August 8, 2007 After I made the original post, I burned another CD to pay closer attention to what was going on. The verify took about 15 minutes. I found that for almost the entire verify, the rate was 4x. Then for the last ten seconds, the speed jumped up. The log is posted below. It includes creating an ISO image from an original, burning the ISO to disc and the automatic verify. -- I 14:26:45 Operation Started! I 14:26:45 Source Device: [1:1:0] HL-DT-ST DVDRAM GSA-4163B A106 (R:) (ATA) I 14:26:45 Source Media Type: CD-ROM I 14:26:45 Source Media Sectors: 318,781 I 14:26:45 Source Media Volume Identifier: Data I 14:26:45 Source Media Application Identifier: TOAST ISO 9660 BUILDER COPYRIGHT © 1997 ADAPTEC, INC. - HAVE A NICE DAY I 14:26:45 Source Media File System(s): ISO9660, Joliet I 14:26:45 Destination File: C:\disc.iso I 14:26:45 Destination Free Space: 16,912,826,368 bytes (16,516,432 KB) (16,129 MB) (15 GB) I 14:26:45 Destination File System: NTFS I 14:26:45 File Splitting: Auto I 14:26:45 Reading Sectors... (LBA: 0 - 318780) I 14:29:10 Image MD5: da0a2111b974aea0ce38fc534de275e1 I 14:29:10 Operation Successfully Completed! - Duration: 00:02:24 I 14:29:10 Average Read Rate: 4,427 KB/s (29.5x) - Maximum Read Rate: 6,205 KB/s (41.4x) I 14:29:50 Operation Started! I 14:29:50 Source File: C:\disc.iso I 14:29:50 Source File Sectors: 318,781 (MODE1/2048) I 14:29:50 Source File Size: 652,863,488 bytes I 14:29:50 Source File Volume Identifier: Data I 14:29:50 Source File Application Identifier: TOAST ISO 9660 BUILDER COPYRIGHT © 1997 ADAPTEC, INC. - HAVE A NICE DAY I 14:29:50 Source File File System(s): ISO9660, Joliet I 14:29:50 Destination Device: [1:1:0] HL-DT-ST DVDRAM GSA-4163B A106 (R:) (ATA) I 14:29:50 Destination Media Type: CD-RW (Disc ID: 97m34s22f) (Speeds: 4x) I 14:29:50 Destination Media Sectors: 336,073 I 14:29:50 Write Mode: CD I 14:29:50 Write Type: SAO I 14:29:50 Write Speed: MAX I 14:29:50 Test Mode: No I 14:29:50 BURN-Proof: Enabled I 14:29:50 Filling Buffer... (20 MB) I 14:29:51 Writing LeadIn... I 14:30:33 Writing Image... (LBA: 0 - 318780) I 14:48:13 Synchronising Cache... I 14:48:39 Image MD5: da0a2111b974aea0ce38fc534de275e1 I 14:48:39 Operation Successfully Completed! - Duration: 00:18:48 I 14:48:39 Average Write Rate: 601 KB/s (4.0x) - Maximum Write Rate: 615 KB/s (4.1x) I 14:48:39 Operation Started! I 14:48:39 Source Device: [1:1:0] HL-DT-ST DVDRAM GSA-4163B A106 (R:) (ATA) I 14:48:39 Source Media Type: CD-RW (Disc ID: 97m34s22f) (Speeds: 4x) I 14:48:39 Image File: C:\disc.iso I 14:48:39 Image File Sectors: 318,781 (MODE1/2048) I 14:48:39 Image File Size: 652,863,488 bytes I 14:48:39 Image File Volume Identifier: Data I 14:48:39 Image File Application Identifier: TOAST ISO 9660 BUILDER COPYRIGHT © 1997 ADAPTEC, INC. - HAVE A NICE DAY I 14:48:39 Image File File System(s): ISO9660, Joliet I 14:48:39 Verifying Sectors... (LBA: 0 - 318780) I 15:03:34 Device MD5: da0a2111b974aea0ce38fc534de275e1 I 15:03:34 Image MD5: da0a2111b974aea0ce38fc534de275e1 I 15:03:34 Operation Successfully Completed! - Duration: 00:14:55 I 15:03:34 Average Verify Rate: 712 KB/s (4.7x) - Maximum Verify Rate: 6,307 KB/s (42.0x)
LIGHTNING UK! Posted August 8, 2007 Posted August 8, 2007 This might well be part by design, part not. Go into the settings and look on the verify tab for the option about setting the read speed.
Relentence Posted August 8, 2007 Author Posted August 8, 2007 "Set Read Speed" is unchecked and the grayed out "Read Speed" is listed as "MAX". All other boxes are unchecked except for "Enable SpeedRead DVD (Plextor)". These are probably the defaults.
LIGHTNING UK! Posted August 8, 2007 Posted August 8, 2007 Sorry, when I said 'look', I meant go and enable it. Without that, the program doesn't issue any commands to set the read speed - i.e. it'll use whatever the drive defaults to. I've made some changes in that department since 2.3.2.0 so the next version might be better for you anyway. That said, I don't recall seeing this issue myself when I burn CDs so maybe not all drives suffer in this way.
Recommended Posts