alex_leo Posted August 12, 2007 Posted August 12, 2007 The write process succeeds on both the layers and then it starts to verify. Imgburn fails every single time it tries to verify layer1. Enclosed is the log: I 21:16:12 Source File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER! I 21:16:12 Source File Implementation Identifier: ImgBurn I 21:16:12 Source File File System(s): ISO9660, UDF (1.02) I 21:16:12 Destination Device: [1:1:0] PHILIPS DVD+-RW DVD8631 GD30 (E:) (ATA) I 21:16:12 Destination Media Type: DVD+R DL (Disc ID: CMC MAG-D01-00) (Speeds: 2.4x) I 21:16:12 Destination Media Sectors: 4,173,824 I 21:16:12 Write Mode: DVD I 21:16:12 Write Type: DAO I 21:16:12 Write Speed: MAX I 21:16:12 Link Size: Auto I 21:16:12 Test Mode: No I 21:16:12 BURN-Proof: Enabled I 21:16:12 Optimal L0 Data Zone Capacity: 2,050,176 I 21:16:12 Optimal L0 Data Zone Method: IFO Cell Boundary, 'SPLIP' Flag Not Set I 21:16:12 Filling Buffer... (20 MB) I 21:16:16 Writing LeadIn... I 21:16:27 Writing Image... (LBA: 0 - 4100351) I 21:16:27 Writing Layer 0... (LBA: 0 - 2050175) I 21:38:09 Writing Layer 1... (LBA: 2050176 - 4100351) I 22:01:47 Synchronising Cache... I 22:01:48 Closing Track... I 22:01:51 Finalising Disc... I 22:03:57 Image MD5: a9e4ca68d0c5f5d69ff2f9c290f63263 I 22:03:59 Operation Successfully Completed! - Duration: 00:47:45 I 22:03:59 Average Write Rate: 3,016 KB/s (2.2x) - Maximum Write Rate: 3,360 KB/s (2.4x) I 22:03:59 Cycling Tray before Verify... W 22:04:08 Waiting for device to become ready... I 22:04:19 Device Ready! I 22:04:19 Operation Started! I 22:04:19 Source Device: [1:1:0] PHILIPS DVD+-RW DVD8631 GD30 (E:) (ATA) I 22:04:19 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: CMC MAG-D01-00) I 22:04:19 Image File: -==/\/[bUILD IMAGE]\/\==- I 22:04:19 Image File Sectors: 4,100,352 (MODE1/2048) I 22:04:19 Image File Size: 8,397,520,896 bytes I 22:04:19 Image File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER! I 22:04:19 Image File Implementation Identifier: ImgBurn I 22:04:19 Image File File System(s): ISO9660, UDF (1.02) I 22:04:19 Verifying Sectors... (LBA: 0 - 4100351) I 22:04:19 Verifying Layer 0... (LBA: 0 - 2050175) I 22:13:30 Verifying Layer 1... (LBA: 2050176 - 4100351) W 22:13:44 Failed to Read Sector 2050176 - Unrecovered Read Error W 22:13:44 Sector 2050176 maps to File: VIDEO_TS\VTS_07_4.VOB E 22:14:09 Failed to Read Sector 2050177 - Unrecovered Read Error E 22:14:09 Sector 2050177 maps to File: VIDEO_TS\VTS_07_4.VOB E 22:14:09 Failed to Verify Sectors! E 22:14:09 Operation Failed! - Duration: 00:09:50 I 22:14:09 Average Verify Rate: 6,961 KB/s (5.0x) - Maximum Verify Rate: 11,132 KB/s (8.0x) I have been using ImgBurn for over a year but only recently upgraded to the latest version and today is the first day i am burning a double layer dvd with the newer version and have not been successful. I have just managed one coaster after another. Can someone help as to what I am doing wrong here or if there is a bug? thanks in advance to all who help!!!!
blutach Posted August 12, 2007 Posted August 12, 2007 Welcome to ImgBurn Forum I 21:16:12 Destination Media Type: DVD+R DL (Disc ID: CMC MAG-D01-00) (Speeds: 2.4x) Yawn. Change your blanks to Verbatim MKM-001s. Even the slightest search would have led you to this conclusion. Regards
alex_leo Posted August 12, 2007 Author Posted August 12, 2007 Welcome to ImgBurn Forum I 21:16:12 Destination Media Type: DVD+R DL (Disc ID: CMC MAG-D01-00) (Speeds: 2.4x) Yawn. Change your blanks to Verbatim MKM-001s. Even the slightest search would have led you to this conclusion. Regards so all the other zillion dl dvds that i burnt which were not verbatim, and are working fine was me being lucky????? i read the other posts and the recommendations for verbatim.
LIGHTNING UK! Posted August 12, 2007 Posted August 12, 2007 If you've burnt zillions, perhaps your drive has just seen better days. So take your pick, new discs or a new drive!
alex_leo Posted August 12, 2007 Author Posted August 12, 2007 If you've burnt zillions, perhaps your drive has just seen better days. So take your pick, new discs or a new drive! thank you, I think it will have to be new discs... since the drive is still burning single layer dvds with no problems at all.
Movie Junkie Posted August 12, 2007 Posted August 12, 2007 so all the other zillion dl dvds that i burnt which were not verbatim, and are working fine was me being lucky????? i read the other posts and the recommendations for verbatim. Just because you burned "zillions" of discs and didn't have any problems doesn't mean that a year from now (or even possibly an week from now) those discs will still be readable. Cheap quality discs are not worth it, no matter what! Your drive is very old and you might want to get a new one. It appears, from what I have read that it came with a Dell computer and the last firmware update for it was back in June 2005. This update was from Dell and is the firmware version you have. The last Phillips update was back in 2004. If you do decide to get a new drive you should still use only Verrbatims for your dual-layer discs (Use on +R, not -R) and stick with Verbatim or TY's for your single-layer discs.
Recommended Posts