schwamieboy Posted August 16, 2007 Share Posted August 16, 2007 (edited) I just DL'ed imgburn and i thought this thing would be bullet proof, but to my shigrin, nope.The reason i say that is i am really new to burning dvds and am pretty much lost here. I am presently backing up my new collection of TV shows and the first disc wrote and burnt with no problems. However the next one is non stop problems!! Hence the Plea for help. "I/O Error! Device: [1:0:0] HL-DT_ST DVDRRW GWA-416 1B 1.00(F:) (ATA) SciStatus: 0x02 Interprstation" Check Condition DB: 28 00 00 03 77 32 00 00 01 00 Interpretation: Read (10) -Sector: 227122 Sense Area: 70 00 03 00 00 00 00 0E 00 00 00 0010 Interpretaion: ID CRC or ECC Error" That was the error message. The log sheet had the following... W 01:54:26 Failed to Read Sector 227120 - ID CRC or ECC Error W 08:11:17 Failed to Read Sector 227121 - ID CRC or ECC Error W 08:39:15 Failed to Read Sector 227122 - ID CRC or ECC Error My machine specs are Processor Type.....................Intel Pentium Model 12, Stepping 0 AuthenticAMD x86 Family 15 Model 12 Stepping 0 AMD Athlon 64 Processor 3200+ CD-ROM Drive.......................HL-DT-ST DVD-ROM GDR8163B CD-ROM Drive.......................HL-DT-ST DVDRRW GWA-4161B CD-ROM Drive.......................KV2502D XFS519Q 2.0B Physical Memory....................1047792 KB 621260 KB Page File..........................2522248 KB 2196408 KB Virtual Memory.....................2097024 KB 2071544 KB Memory Load........................40% DRIVES Removable......................No disk in drive Fixed (NTFS: Main).............76316 MB Total, 42686 MB Free Fixed (NTFS: Fun)..............152625 MB Total, 24286 MB Free CD/DVD.........................No disk in drive CD/DVD.........................No disk in drive CD/DVD.........................No disk in drive Thanks... Edited August 16, 2007 by schwamieboy Link to comment Share on other sites More sharing options...
dontasciime Posted August 16, 2007 Share Posted August 16, 2007 ImgBurn does not backup commercial dvd's. If your simply using ImgBurn to write them out you will need to post the full log file as this will include the type of media you are using. There may be a firmware update to your drive as well Link to comment Share on other sites More sharing options...
schwamieboy Posted August 16, 2007 Author Share Posted August 16, 2007 Yeah i meant that i was burning the content from the orginal discs to new ones for everyday use.The log is as follows... I 01:47:26 ImgBurn Version 2.3.2.0 started! I 01:47:26 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 01:47:26 Total Physical Memory: 1,047,792 KB - Available: 573,068 KB I 01:47:27 Initialising SPTI... I 01:47:27 Searching for SCSI / ATAPI devices... I 01:47:27 Found 2 DVD-ROMs and 1 DVD±RW! I 01:49:51 Operation Started! I 01:49:51 Source Device: [1:0:0] HL-DT-ST DVDRRW GWA-4161B 1.00 (F:) (ATA) I 01:49:51 Source Media Type: DVD-ROM I 01:49:51 Source Media Sectors: 3,680,588 (Track Path: OTP - L0: 1,909,696 - L1: 1,770,892) I 01:49:51 Source Media Volume Identifier: LO20NNT6 I 01:49:51 Source Media Application Identifier: GEAR UDF Application I 01:49:51 Source Media Implementation Identifier: GEAR UDF I 01:49:51 Source Media File System(s): ISO9660, UDF (1.02) I 01:49:51 Destination File: D:\______Media\My Videos\___BTV Production\__TV\Lost\Season two\LO20NNT6.ISO I 01:49:51 Destination Free Space: 89,559,605,248 bytes (87,460,552 KB) (85,410 MB) (83 GB) I 01:49:51 Destination File System: NTFS I 01:49:51 File Splitting: Auto I 01:49:52 Reading Sectors... (LBA: 0 - 3680587) I 01:49:52 Reading Layer 0... (LBA: 0 - 1909695) W 01:54:26 Failed to Read Sector 227120 - ID CRC or ECC Error W 08:11:17 Failed to Read Sector 227121 - ID CRC or ECC Error W 08:39:15 Failed to Read Sector 227122 - ID CRC or ECC Error Link to comment Share on other sites More sharing options...
dontasciime Posted August 16, 2007 Share Posted August 16, 2007 sorry then ImgBurn does not copy original dvds Link to comment Share on other sites More sharing options...
schwamieboy Posted August 16, 2007 Author Share Posted August 16, 2007 (edited) LMAO are you kidding me..what was it created for again exactly?? Remember the first disc was no problem but the second was???? Edited August 16, 2007 by schwamieboy Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted August 16, 2007 Share Posted August 16, 2007 What was 'ImgBurn' created for?! Burning Images (disc images, ISO files etc) mainly, hence the name. DVD Video discs are protected against copying, that's why ImgBurn won't read them. Any other 'normal' disc and you'd be fine. Link to comment Share on other sites More sharing options...
schwamieboy Posted August 16, 2007 Author Share Posted August 16, 2007 What was 'ImgBurn' created for?! Burning Images (disc images, ISO files etc) mainly, hence the name. DVD Video discs are protected against copying, that's why ImgBurn won't read them. Any other 'normal' disc and you'd be fine. Right makes sense, sorry for wasting your time. Link to comment Share on other sites More sharing options...
blutach Posted August 16, 2007 Share Posted August 16, 2007 edit. Regards Link to comment Share on other sites More sharing options...
Recommended Posts