Help, end-of-operation problems!

[Pawn]

What happens is when I try to burn a disc, it does the actual writing just fine, but when it gets to Synchronising Cache, it gives me an error that comes back if I retry. The same happens with Close Track and Finalise Disc when I press Cancel. After that I get an 'Operation Failed'. Here be the log:

 

I 22:26:05 ImgBurn Version 2.3.2.0 started!

I 22:26:05 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)

I 22:26:05 Total Physical Memory: 1 048 048 KB - Available: 484 100 KB

I 22:26:05 Initialising SPTI...

I 22:26:05 Searching for SCSI / ATAPI devices...

I 22:26:05 Found 1 DVD-ROM and 1 DVD±RW/RAM!

I 22:28:51 Operation Started!

I 22:28:51 Source File: G:\ISOt\Iso.iso

I 22:28:51 Source File Sectors: 2 294 912 (MODE1/2048)

I 22:28:51 Source File Size: 4 699 979 776 bytes

I 22:28:51 Source File File System(s): None

I 22:28:51 Destination Device: [0:2:0] HL-DT-ST DVDRAM GSA-4163B A101 (D:) (ATA)

I 22:28:51 Destination Media Type: DVD+R (Disc ID: MBIPG101-R05-01) (Speeds: 4x; 8x; 12x; 16x)

I 22:28:51 Destination Media Sectors: 2 295 104

I 22:28:51 Write Mode: DVD

I 22:28:51 Write Type: DAO

I 22:28:51 Write Speed: 4x

I 22:28:51 Link Size: Auto

I 22:28:51 Test Mode: No

I 22:28:51 BURN-Proof: Enabled

I 22:29:13 Filling Buffer... (40 MB)

I 22:29:14 Writing LeadIn...

I 22:29:53 Writing Image... (LBA: 0 - 2294911)

I 22:44:00 Synchronising Cache...

W 22:44:31 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Program Memory Area Update Failure

W 22:45:35 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Program Memory Area Update Failure

E 22:45:57 Synchronise Cache Failed! - Reason: Program Memory Area Update Failure

I 22:45:57 Synchronising Cache (Last Attempt!)...

E 22:46:27 Synchronise Cache Failed! - Reason: Unknown (0xA0, 0x80)

I 22:46:27 Closing Track...

W 22:47:09 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Program Memory Area Is Full

E 22:47:24 Close Track Failed! - Reason: Program Memory Area Is Full

I 22:47:24 Closing Track (Last Attempt!)...

I 22:47:24 Finalising Disc...

W 22:47:46 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Program Memory Area Update Failure

E 22:48:57 Finalise Disc Failed! - Reason: Program Memory Area Update Failure

I 22:48:57 Finalising Disc (Last Attempt!)...

E 22:49:40 Finalise Disc Failed! - Reason: Program Memory Area Update Failure

E 22:49:40 Failed to Write Image!

E 22:49:40 Operation Failed! - Duration: 00:20:49

I 22:49:40 Average Write Rate: 5 418 KB/s (3.9x) - Maximum Write Rate: 5 566 KB/s (4.0x)

 

Thanks in advance for the help!

(Please don't tell me my discs are bad quality =( )

 

PS. One more thing. I was told that I should use the DVD-ROM Book Type mode for this particular ISO. So I changed the mode of DVD+R in the LG menu (Yes, my drive is LG) to DVD-ROM and clicked Change. Could that be the problem or should I have done something else as well to change the book type?

Edited August 18, 2007 by Pawn

[dontasciime]

Your disc's are bad.

 

Sorry but thats the truth. Moser Baer if that is how you spell it from what I have seen are terrible.

 

Make sure your firmware for drive is the latest but you would be better off getting some verbatim Mcc or taiyo yuden

 

 

Edit there are a few new firmwares for you drive (as a rule though use the latest one 106)

 

http://forum.rpc1.org/dl_firmware.php?download_id=1973

 

when updating firmware take any disc out of the drive and close tray

[volvofl10]

Thanks in advance for the help!

(Please don't tell me my discs are bad quality =( )

PS. One more thing. I was told that I should use the DVD-ROM Book Type mode for this particular ISO. So I changed the mode of DVD+R in the LG menu (Yes, my drive is LG) to DVD-ROM and clicked Change. Could that be the problem or should I have done something else as well to change the book type?

 

i wont tell you your media is bad quality , but check out this list and find a reputable reliable manufacturer within it

http://www.videohelp.com/dvdmedia?dvdmediasearch

 

is it ONLY with this media you get the problem ? or si it with ALL brands of media ?

 

update your firmware as well, your on A101, the latest for that drive is A106 , your 5 updates behind !!

I 22:28:51 Destination Device: [0:2:0] HL-DT-ST DVDRAM GSA-4163B A101 (D:) (ATA)

 

EDIT Donta beat me to it LOL