Pawn Posted August 18, 2007 Posted August 18, 2007 (edited) What happens is when I try to burn a disc, it does the actual writing just fine, but when it gets to Synchronising Cache, it gives me an error that comes back if I retry. The same happens with Close Track and Finalise Disc when I press Cancel. After that I get an 'Operation Failed'. Here be the log: I 22:26:05 ImgBurn Version 2.3.2.0 started! I 22:26:05 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 22:26:05 Total Physical Memory: 1 048 048 KB - Available: 484 100 KB I 22:26:05 Initialising SPTI... I 22:26:05 Searching for SCSI / ATAPI devices... I 22:26:05 Found 1 DVD-ROM and 1 DVD±RW/RAM! I 22:28:51 Operation Started! I 22:28:51 Source File: G:\ISOt\Iso.iso I 22:28:51 Source File Sectors: 2 294 912 (MODE1/2048) I 22:28:51 Source File Size: 4 699 979 776 bytes I 22:28:51 Source File File System(s): None I 22:28:51 Destination Device: [0:2:0] HL-DT-ST DVDRAM GSA-4163B A101 (D:) (ATA) I 22:28:51 Destination Media Type: DVD+R (Disc ID: MBIPG101-R05-01) (Speeds: 4x; 8x; 12x; 16x) I 22:28:51 Destination Media Sectors: 2 295 104 I 22:28:51 Write Mode: DVD I 22:28:51 Write Type: DAO I 22:28:51 Write Speed: 4x I 22:28:51 Link Size: Auto I 22:28:51 Test Mode: No I 22:28:51 BURN-Proof: Enabled I 22:29:13 Filling Buffer... (40 MB) I 22:29:14 Writing LeadIn... I 22:29:53 Writing Image... (LBA: 0 - 2294911) I 22:44:00 Synchronising Cache... W 22:44:31 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Program Memory Area Update Failure W 22:45:35 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Program Memory Area Update Failure E 22:45:57 Synchronise Cache Failed! - Reason: Program Memory Area Update Failure I 22:45:57 Synchronising Cache (Last Attempt!)... E 22:46:27 Synchronise Cache Failed! - Reason: Unknown (0xA0, 0x80) I 22:46:27 Closing Track... W 22:47:09 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Program Memory Area Is Full E 22:47:24 Close Track Failed! - Reason: Program Memory Area Is Full I 22:47:24 Closing Track (Last Attempt!)... I 22:47:24 Finalising Disc... W 22:47:46 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Program Memory Area Update Failure E 22:48:57 Finalise Disc Failed! - Reason: Program Memory Area Update Failure I 22:48:57 Finalising Disc (Last Attempt!)... E 22:49:40 Finalise Disc Failed! - Reason: Program Memory Area Update Failure E 22:49:40 Failed to Write Image! E 22:49:40 Operation Failed! - Duration: 00:20:49 I 22:49:40 Average Write Rate: 5 418 KB/s (3.9x) - Maximum Write Rate: 5 566 KB/s (4.0x) Thanks in advance for the help! (Please don't tell me my discs are bad quality =( ) PS. One more thing. I was told that I should use the DVD-ROM Book Type mode for this particular ISO. So I changed the mode of DVD+R in the LG menu (Yes, my drive is LG) to DVD-ROM and clicked Change. Could that be the problem or should I have done something else as well to change the book type? Edited August 18, 2007 by Pawn
dontasciime Posted August 18, 2007 Posted August 18, 2007 Your disc's are bad. Sorry but thats the truth. Moser Baer if that is how you spell it from what I have seen are terrible. Make sure your firmware for drive is the latest but you would be better off getting some verbatim Mcc or taiyo yuden Edit there are a few new firmwares for you drive (as a rule though use the latest one 106) http://forum.rpc1.org/dl_firmware.php?download_id=1973 when updating firmware take any disc out of the drive and close tray
volvofl10 Posted August 18, 2007 Posted August 18, 2007 Thanks in advance for the help!(Please don't tell me my discs are bad quality =( ) PS. One more thing. I was told that I should use the DVD-ROM Book Type mode for this particular ISO. So I changed the mode of DVD+R in the LG menu (Yes, my drive is LG) to DVD-ROM and clicked Change. Could that be the problem or should I have done something else as well to change the book type? i wont tell you your media is bad quality , but check out this list and find a reputable reliable manufacturer within it http://www.videohelp.com/dvdmedia?dvdmediasearch is it ONLY with this media you get the problem ? or si it with ALL brands of media ? update your firmware as well, your on A101, the latest for that drive is A106 , your 5 updates behind !! I 22:28:51 Destination Device: [0:2:0] HL-DT-ST DVDRAM GSA-4163B A101 (D:) (ATA) EDIT Donta beat me to it LOL
Recommended Posts