Error during Verification

[Sweet_Jaws]

I've just started to use Imgburn in place of DVD Decrypter for burning my DVDs. Thus far I have a 50% failure rate. I get an error during the verification process. I don't have a log file to show right now. I will post it the next time it happens. In the meantime any suggestions would be appreciated. Thank You

 

I've now had 5 discs fail. 2 were Sony and 3 were Verbatim. All have been Dual Layers.

 

Here is the log file:

 

I 11:28:35 ImgBurn Version 2.3.2.0 started!

I 11:28:35 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)

I 11:28:35 Total Physical Memory: 515,452 KB - Available: 126,716 KB

I 11:28:35 Initialising SPTI...

I 11:28:35 Searching for SCSI / ATAPI devices...

I 11:28:35 Found 1 DVD-ROM and 1 DVD±RW!

I 11:29:50 Operation Started!

I 11:29:50 Source File: C:\Documents and Settings\Mike\My Documents\My Videos\Pans_Labyrinth_D1.MDS

I 11:29:50 Source File Sectors: 3,840,473 (MODE1/2048)

I 11:29:50 Source File Size: 7,865,288,704 bytes

I 11:29:50 Source File Volume Identifier: Pans_Labyrinth_D1

I 11:29:50 Source File Implementation Identifier: Sonic ROM Formatter 2.

I 11:29:50 Source File File System(s): ISO9660, UDF (1.02)

I 11:29:50 Destination Device: [1:0:0] TSSTcorp DVD+-RW TS-L532B DE04 (D:) (ATA)

I 11:29:50 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x)

I 11:29:50 Destination Media Sectors: 4,173,824

I 11:29:50 Write Mode: DVD

I 11:29:50 Write Type: DAO

I 11:29:50 Write Speed: 2.4x

I 11:29:50 Link Size: Auto

I 11:29:50 Test Mode: No

I 11:29:50 BURN-Proof: Enabled

I 11:31:45 Optimal L0 Data Zone Capacity: 2,016,704

I 11:31:45 Optimal L0 Data Zone Method: Copied From Original Disc

I 11:32:27 Filling Buffer... (20 MB)

I 11:32:28 Writing LeadIn...

I 11:32:30 Writing Image... (LBA: 0 - 3840472)

I 11:32:30 Writing Layer 0... (LBA: 0 - 2016703)

I 11:53:34 Writing Layer 1... (LBA: 2016704 - 3840472)

I 12:13:15 Synchronising Cache...

I 12:13:20 Closing Track...

I 12:13:21 Finalising Disc...

I 12:16:53 Image MD5: b50b0802cb9b0604ce819b129dec75cd

I 12:16:53 Operation Successfully Completed! - Duration: 00:47:03

I 12:16:53 Average Write Rate: 3,142 KB/s (2.3x) - Maximum Write Rate: 3,525 KB/s (2.5x)

I 12:16:54 Operation Started!

I 12:16:54 Source Device: [1:0:0] TSSTcorp DVD+-RW TS-L532B DE04 (D:) (ATA)

I 12:16:54 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x)

I 12:16:54 Image File: C:\Documents and Settings\Mike\My Documents\My Videos\Pans_Labyrinth_D1.MDS

I 12:16:54 Image File Sectors: 3,840,473 (MODE1/2048)

I 12:16:54 Image File Size: 7,865,288,704 bytes

I 12:16:54 Image File Volume Identifier: Pans_Labyrinth_D1

I 12:16:54 Image File Implementation Identifier: Sonic ROM Formatter 2.

I 12:16:54 Image File File System(s): ISO9660, UDF (1.02)

I 12:16:54 Verifying Sectors... (LBA: 0 - 3840472)

I 12:16:54 Verifying Layer 0... (LBA: 0 - 2016703)

I 12:34:27 Verifying Layer 1... (LBA: 2016704 - 3840472)

E 12:44:22 Failed to Read Sector 3139552 - Random Positioning Error

E 12:44:22 Sector 3139552 maps to File: VIDEO_TS\VTS_03_6.VOB

E 12:44:22 Failed to Verify Sectors!

E 12:44:25 Operation Failed! - Duration: 00:27:28

I 12:44:25 Average Verify Rate: 3,812 KB/s (2.8x) - Maximum Verify Rate: 5,564 KB/s (4.0x)

Edited September 2, 2007 by Sweet_Jaws

[volvofl10]

Its possible the disc you made will still play in a standalone player, albeit with a small glitch at some point.

 

as long as it was a "read" error in verification, it means that the drive had problems reading the disc when it was comparing it with the original file on your hdd.

Answer to this is to chnage your media to a better kind, however, it would be of more help if you post a log file and we can advise you further/better after we see it

 

Chances are your using blank media with a "CMC" dye/ink, which is about the worst type there is , hence the need to see the log file