barmalej Posted September 10, 2007 Posted September 10, 2007 (edited) I'm trying to burn several files using 'Build' mode on TY DVD+R. Burner is Samsung SH-203B. Everything works fine until the very end – ImgBurn shows 99% Finalize on the bottom and then error message "WaitImmediateIO Error - Program Memory Area Update Failure". I press "retry" – ImgBurn does finalizing again and then goes on to verify. Then I get a message "Operation Successfully Completed!" Looks fine so far but… my stand alone player and DVD-Rom on another computer are unable to read the disk. Both my DVD Burners can read the disk fine but Benq shows some junk in disk info: Samsung reads disk info fine but shows DVD+R as book type: Looks like ImgBurn fails to book type the disk (Auto change book type was checked)... Here is the log: ; I 23:08:59 ImgBurn Version 2.3.2.0 started! I 23:08:59 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 23:08:59 Total Physical Memory: 1,048,036 KB - Available: 757,900 KB I 23:09:00 Initialising SPTI... I 23:09:00 Searching for SCSI / ATAPI devices... I 23:09:00 Found 1 CD-RW, 1 DVD±RW and 1 DVD±RW/RAM! I 23:09:43 Operation Started! I 23:09:43 Building Image Tree... I 23:09:43 Checking Directory Depth... I 23:09:43 Calculating Totals... I 23:09:43 Preparing Image... I 23:09:43 Checking Path Length... I 23:09:43 Image Size: 4,186,734,592 bytes I 23:09:43 Image Sectors: 2,044,304 I 23:09:43 Operation Successfully Completed! - Duration: 00:00:00 I 23:10:03 Operation Started! I 23:10:03 Building Image Tree... I 23:10:15 Checking Directory Depth... I 23:10:15 Calculating Totals... I 23:10:15 Preparing Image... I 23:10:15 Checking Path Length... I 23:10:15 Image Size: 4,186,734,592 bytes I 23:10:15 Image Sectors: 2,044,304 I 23:10:16 Operation Successfully Completed! - Duration: 00:00:12 I 23:10:16 Operation Started! I 23:10:16 Source File: -==/\/[BUILD IMAGE]\/\==- I 23:10:16 Source File Sectors: 2,044,304 (MODE1/2048) I 23:10:16 Source File Size: 4,186,734,592 bytes I 23:10:16 Source File Volume Identifier: ****** I 23:10:16 Source File Application Identifier: ImgBurn v2.3.2.0 - The Ultimate Image Burner! I 23:10:16 Source File File System(s): ISO9660, Joliet I 23:10:16 Destination Device: [1:0:0] TSSTcorp CDDVDW SH-S203B SB01 (H:) (ATA) I 23:10:16 Destination Media Type: DVD+R (Disc ID: YUDEN000-T02-00) (Speeds: 4x, 6x, 8x, 12x) I 23:10:16 Destination Media Sectors: 2,295,104 I 23:10:16 Write Mode: DVD I 23:10:16 Write Type: DAO I 23:10:16 Write Speed: 4x I 23:10:16 Link Size: Auto I 23:10:16 Test Mode: No I 23:10:16 BURN-Proof: Enabled I 23:10:17 Filling Buffer... (20 MB) I 23:10:18 Writing LeadIn... I 23:10:25 Writing Image... (LBA: 0 - 2044303) I 23:23:07 Synchronising Cache... I 23:23:11 Closing Track... I 23:23:14 Finalising Disc... W 23:23:28 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Program Memory Area Update Failure I 23:24:58 Image MD5: 03d6571dadfd8f1dd578cc66fdd08d04 I 23:24:58 Exporting Graph Data... I 23:24:58 Graph Data File: C:\Program Files\ImgBurn\TSSTcorp_CDDVDW_SH-S203B_SB01_SUNDAY-SEPTEMBER-09-2007_11-10_PM_YUDEN000-T02-00_4x.ibg I 23:24:58 Export Successfully Completed! I 23:24:58 Operation Successfully Completed! - Duration: 00:14:41 I 23:24:58 Average Write Rate: 5,372 KB/s (3.9x) - Maximum Write Rate: 5,592 KB/s (4.0x) I 23:24:58 Operation Started! I 23:24:58 Source Device: [1:0:0] TSSTcorp CDDVDW SH-S203B SB01 (H:) (ATA) I 23:24:58 Source Media Type: DVD+R (Book Type: DVD+R) (Disc ID: YUDEN000-T02-00) (Speeds: 4x, 6x, 8x, 12x) I 23:24:58 Image File: -==/\/[BUILD IMAGE]\/\==- I 23:24:58 Image File Sectors: 2,044,304 (MODE1/2048) I 23:24:58 Image File Size: 4,186,734,592 bytes I 23:24:58 Image File Volume Identifier: Movies I 23:24:58 Image File Application Identifier: ImgBurn v2.3.2.0 - The Ultimate Image Burner! I 23:24:58 Image File File System(s): ISO9660, Joliet I 23:24:58 Verifying Sectors... (LBA: 0 - 2044303) I 23:30:47 Device MD5: 03d6571dadfd8f1dd578cc66fdd08d04 I 23:30:47 Image MD5: 03d6571dadfd8f1dd578cc66fdd08d04 I 23:30:48 Exporting Graph Data... I 23:30:48 Graph Data File: C:\Program Files\ImgBurn\TSSTcorp_CDDVDW_SH-S203B_SB01_SUNDAY-SEPTEMBER-09-2007_11-10_PM_YUDEN000-T02-00_4x.ibg I 23:30:48 Export Successfully Completed! I 23:30:48 Operation Successfully Completed! - Duration: 00:05:49 I 23:30:48 Average Verify Rate: 11,715 KB/s (8.5x) - Maximum Verify Rate: 21,416 KB/s (15.5x) I 23:42:38 Close Request Acknowledged I 23:42:38 Closing Down... I 23:42:38 Shutting down SPTI... I 23:42:38 ImgBurn closed! The same error happened to me about a week ago - I tried to burn few files 3 times in row with the same result. Actually one time I pressed "cancel" instead of "retry" but result was still the same. So I end up burning with nero on Benq and everything worked fine. Any ideas? Edited September 10, 2007 by barmalej
dontasciime Posted September 10, 2007 Posted September 10, 2007 Dodgy disc's bad batch maybe You updated the firmware on the drive recently ? or did it come with SB01. Maybe check IDE cable is secure or replace with 80 if on 40 or just try replacing IDE cable. check 4 pin power whilst there. Are you using a 3rd party IDE controller ? If so see if there are any driver updates. Maybe check the other software you have installed like Incd or anything similar. post the filter driver load order from tools menu. Strange error for DAO mode where pma is not supposed to be touched [edit] what size Psu have you got in that machine and have you got another machine you could try that writer in ? Burn them at their rated speed as well.
barmalej Posted September 10, 2007 Author Posted September 10, 2007 (edited) I updated firmware the minute I installed it - it came with SB00. The drive is SATA and cable should be fine - it was attached to HDD for a few months. SATA port is on motherboard. No software other than Nero and ImgBurn. PSU is 550W Antec. Motherboard is nForce 3 Pro. Here is filter driver load order: =============================================== Filter Driver Load Order - ImgBurn v2.3.2.0 =============================================== Upper Device Filter: redbook Upper Class Filter: [None Found] Device: CD/DVD-ROM Device Lower Class Filter: Pfc <- How this one got here? Lower Device Filter: imapi Filter Name: redbook File Name: C:\WINDOWS\system32\DRIVERS\redbook.sys File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) File Description: Redbook Audio Filter Driver Product Name: Microsoft® Windows® Operating System Product Version: 5.1.2600.2180 Company Name: Microsoft Corporation Copyright: © Microsoft Corporation. All rights reserved. Filter Name: Pfc File Name: C:\WINDOWS\system32\drivers\pfc.sys File Version: 2, 5, 0, 205 [2.5.0.205] File Description: Padus(R) ASPI Shell Product Name: Padus(R) ASPI Shell Product Version: 2, 5, 0, 205 [2.5.0.205] Company Name: Padus, Inc. Copyright: (C) Padus, Inc. 1999-2004. All rights reserved. Filter Name: imapi File Name: C:\WINDOWS\system32\DRIVERS\imapi.sys File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) File Description: IMAPI Kernel Driver Product Name: Microsoft® Windows® Operating System Product Version: 5.1.2600.2180 Company Name: Microsoft Corporation Copyright: © Microsoft Corporation. All rights reserved. Edited September 10, 2007 by barmalej
LIGHTNING UK! Posted September 10, 2007 Posted September 10, 2007 The booktype stuff often fails when one of the close track/session/disc commands fails. This is more the drive's fault than ImgBurns - I simply tell the drive to do before the burn and it should then remember that it needs to when it gets to the end of the burn. It's not an actual function that ImgBurn has to perform.
dontasciime Posted September 10, 2007 Posted September 10, 2007 try removing the padus one pfc.sys then look in registry for key below and delete it HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318} then reboot Maybe see if there is update to the sata drivers for nf3 or maybe just use the standard MS ones instead.
chewy Posted September 10, 2007 Posted September 10, 2007 Maybe see if there is update to the sata drivers for nf3 or maybe just use the standard MS ones instead. my durn xp sp2 doesn't pick up nf2 chipsets very well, now ide drivers seem fine what is the version and date on that sata controller driver in device manager? Version: 5.11Release Date: November 2, 2005 WHQL Certified ?????
barmalej Posted September 14, 2007 Author Posted September 14, 2007 Version: 5.11Release Date: November 2, 2005 WHQL Certified Exactly! pfc.sys is gone. I guess I'll try to install nForce remix drivers and see what happens... Thanks for your help guys!
begurgan Posted September 16, 2007 Posted September 16, 2007 I'm not sure if I'm having the exact same problem as the OP, but it's similiar. I had TONS of problems trying to burn(using Nero + ImgBurn)) with my SONY DRU-710 DVD+/-R, RW, DL drive until finally today I decided I was going to update the firmware so I did. Then I was having trouble uninstalling the drive because all of the failures had locked me out of DMA so finally I fixed that. I tried to burn my first DVD using VIDEO_TS files and it worked on the very first try with ImgBurn and Memorex DVD-R at Auto detect speeds. Then I tried to burn the same files for another copy and I get this error message every subsequent time I try to burn anything. I've gone through about 5 DVD's so far and I don't want to throw away anymore money. Here is a screen cap: It seems it happens every time during the Synchronising Cache Phase but seems to burn 100% and finish the file-but if I hit retry or cancel, it doesn't work in my Xbox360 like the first and only successful burn of the same file. System Specs: Windows XP/SP2 Pentium 4 @ 3.4 ghz 2GB DDR2 ATI Radeon X800XT Audigy 2 ZS Here is the Driver load: =============================================== Filter Driver Load Order - ImgBurn v2.3.2.0 =============================================== Upper Device Filter: redbook Upper Class Filter: GEARAspiWDM Device: CD/DVD-ROM Device Lower Class Filter: PxHelp20 Lower Device Filter: imapi Filter Name: redbook File Name: C:\WINDOWS\system32\DRIVERS\redbook.sys File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) File Description: Redbook Audio Filter Driver Product Name: Microsoft® Windows® Operating System Product Version: 5.1.2600.2180 Company Name: Microsoft Corporation Copyright: © Microsoft Corporation. All rights reserved. Filter Name: GEARAspiWDM File Name: C:\WINDOWS\System32\Drivers\GEARAspiWDM.sys File Version: 2.0.6.1 File Description: CD/DVD Class Filter Driver Product Name: GEAR.wrks Product Version: 8.xx [2.0.6.1] Company Name: GEAR Software Inc. Copyright: Copyright © GEAR Software Inc. 2006 Filter Name: PxHelp20 File Name: C:\WINDOWS\System32\Drivers\PxHelp20.sys File Version: 2.03.16a [2.3.16.0] File Description: Px Engine Device Driver for Windows 2000/XP Product Name: PxHelp20 Product Version: [2.0.0.0] Company Name: Sonic Solutions Copyright: Copyright © Sonic Solutions Filter Name: imapi File Name: C:\WINDOWS\system32\DRIVERS\imapi.sys File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) File Description: IMAPI Kernel Driver Product Name: Microsoft® Windows® Operating System Product Version: 5.1.2600.2180 Company Name: Microsoft Corporation Copyright: © Microsoft Corporation. All rights reserved. Any help would be appreciated......Thanks.
LIGHTNING UK! Posted September 17, 2007 Posted September 17, 2007 Ok, firstly the Guides section of this forum covers what the 'AUTO' speed is. It's not Auto in the sense that you think it is, YOU need to configure it first or all your discs / drives will burn at full speed - and that's NOT a good thing. You got a power calibration error at the start of that burn - that's not good either! Without seeing the complete log I can only assume you're using cheapo media. Get yourself some Verbatim (MCC dye) or Taiyo Yuden discs and then try burning with those instead.
LOCOENG Posted September 17, 2007 Posted September 17, 2007 it worked on the very first try with ImgBurn and Memorex DVD-R Yep, that would be a part of the problem...as LUK suggested only Verbatim or Taiyo Yuden.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now