Duckman Posted September 13, 2007 Posted September 13, 2007 trying to burn an iso that is 7.05 GB with verbatim discs. I got the layer break at 1913760 and i also set the drive to dvd-rom but i still get the I/o Error about halfway through. Any ideas and or suggestions would be appreciated. Here is the error log. I 20:53:49 ImgBurn Version 2.3.2.0 started! I 20:53:49 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 20:53:49 Total Physical Memory: 523,760 KB - Available: 272,404 KB I 20:53:49 Initialising SPTI... I 20:53:49 Searching for SCSI / ATAPI devices... I 20:53:49 Found 1 DVD-ROM and 1 DVD±RW/RAM! I 20:56:33 Operation Started! I 20:56:33 Source File: D:\Files\XBox 360\FlatOut.Ultimate.Carnage.PAL.XBOX360-FW\alt.binaries.games.xbox360\Medal of Honor Airborne\ccclx-mohab.dvd I 20:56:33 Source File Sectors: 3,697,696 (MODE1/2048) I 20:56:33 Source File Size: 7,572,881,408 bytes I 20:56:33 Source File Volume Identifier: XGD2DVD_NTSC I 20:56:33 Source File Implementation Identifier: Sonic Scenarist 3.1 I 20:56:33 Source File File System(s): ISO9660, UDF (1.02) I 20:56:33 Destination Device: [1:0:0] HL-DT-ST DVDRAM GSA-H10A JL05 (E:) (ATA) I 20:56:33 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x) I 20:56:33 Destination Media Sectors: 4,173,824 I 20:56:33 Write Mode: DVD I 20:56:33 Write Type: DAO I 20:56:33 Write Speed: 2.4x I 20:56:33 Link Size: Auto I 20:56:33 Test Mode: No I 20:56:33 BURN-Proof: Enabled I 20:56:33 User Specified L0 Data Zone Capacity: 1,913,760 I 20:57:07 Filling Buffer... (20 MB) I 20:57:07 Writing LeadIn... I 20:57:10 Writing Image... (LBA: 0 - 3697695) I 20:57:10 Writing Layer 0... (LBA: 0 - 1913759) W 21:13:32 Failed to Write Sectors 1600544 - 1600575 - Power On, Reset, or Bus Device Reset Occurred W 21:13:32 Retrying (1 of 20)... W 21:13:37 Retry Failed - Invalid Address For Write W 21:13:37 Retrying (2 of 20)... W 21:13:37 Retry Failed - Invalid Address For Write W 21:13:37 Retrying (3 of 20)... W 21:13:37 Retry Failed - Invalid Address For Write W 21:13:37 Retrying (4 of 20)... W 21:13:37 Retry Failed - Invalid Address For Write W 21:13:37 Retrying (5 of 20)... W 21:13:37 Retry Failed - Invalid Address For Write W 21:13:37 Retrying (6 of 20)... W 21:13:37 Retry Failed - Invalid Address For Write W 21:13:37 Retrying (7 of 20)... W 21:13:37 Retry Failed - Invalid Address For Write W 21:13:37 Retrying (8 of 20)... W 21:13:37 Retry Failed - Invalid Address For Write W 21:13:37 Retrying (9 of 20)... W 21:13:37 Retry Failed - Invalid Address For Write W 21:13:37 Retrying (10 of 20)... W 21:13:37 Retry Failed - Invalid Address For Write W 21:13:37 Retrying (11 of 20)... W 21:13:37 Retry Failed - Invalid Address For Write W 21:13:37 Retrying (12 of 20)... W 21:13:37 Retry Failed - Invalid Address For Write W 21:13:37 Retrying (13 of 20)... W 21:13:37 Retry Failed - Invalid Address For Write W 21:13:37 Retrying (14 of 20)... W 21:13:37 Retry Failed - Invalid Address For Write W 21:13:37 Retrying (15 of 20)... W 21:13:37 Retry Failed - Invalid Address For Write W 21:13:37 Retrying (16 of 20)... W 21:13:37 Retry Failed - Invalid Address For Write W 21:13:37 Retrying (17 of 20)... W 21:13:37 Retry Failed - Invalid Address For Write W 21:13:37 Retrying (18 of 20)... W 21:13:37 Retry Failed - Invalid Address For Write W 21:13:37 Retrying (19 of 20)... W 21:13:37 Retry Failed - Invalid Address For Write W 21:13:37 Retrying (20 of 20)... W 21:13:37 Retry Failed - Invalid Address For Write E 21:13:48 Failed to Write Sectors 1600544 - 1600575 - Power On, Reset, or Bus Device Reset Occurred I 21:13:48 Synchronising Cache... I 21:13:49 Closing Track... I 21:13:51 Finalising Disc... E 21:53:43 Failed to Write Image! E 21:53:48 Operation Failed! - Duration: 00:57:10 I 21:53:48 Average Write Rate: 3,207 KB/s (2.3x) - Maximum Write Rate: 3,413 KB/s (2.5x) Thx in advance The Duck
LIGHTNING UK! Posted September 13, 2007 Posted September 13, 2007 You had a system glitch some way before the layer break. W 21:13:32 Failed to Write Sectors 1600544 - 1600575 - Power On, Reset, or Bus Device Reset Occurred I'm afraid it really is down to you to figure out what caused it. First things to check are up-to-date motherboard bios, drive firmware, cable to drive (+ location on cable and jumper configuration). Try burning with just that one drive on the cable (if it's not already like that). Update all the chipset / ide drivers in the system. Check your filter drivers (can be done via the 'Tools' menu in ImgBurn) and remove and drivers that aren't from Microsoft and aren't fairly recernt (i.e. year 2006+) - well, remove or update the programs that put them on.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now