Jump to content

Failed to write DVD+R DL disc


iamme99
 Share

Recommended Posts

I have a 5GB folder (x number of files) that I need to put on DVD to send to someone. I followed the instruction guide and built an ISO file of the folder.

 

I then tried to write this ISO file to a DVD+R DL disc. IB got maybe halfway through and crapped out. The log is below and I don't know what the problem is, so I am wary of maybe wasting more discs trying again.

 

I then figured maybe I could use a standard disc (single layer) but the ISO file is too large and it doesn't look like IB supports automatic spanning.

 

Any help would be appreciated!

 

post-8626-1190399268_thumb.jpg

 

========================================

 

I 09:52:26 Operation Started!

I 09:52:26 Source File: K:\Laptop_SQL.mds

I 09:52:26 Source File Sectors: 2,570,592 (MODE1/2048)

I 09:52:26 Source File Size: 5,264,572,416 bytes

I 09:52:26 Source File Volume Identifier: Laptop_SQL_Data

I 09:52:26 Source File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER!

I 09:52:26 Source File Implementation Identifier: ImgBurn

I 09:52:26 Source File File System(s): ISO9660, UDF (1.02)

I 09:52:26 Destination Device: [2:2:0] PLEXTOR DVDR PX-740A 1.02 (P:) (ATA)

I 09:52:26 Destination Media Type: DVD+R DL (Disc ID: RITEK-D01-01) (Speeds: 2.4x)

I 09:52:26 Destination Media Sectors: 4,173,824

I 09:52:26 Write Mode: DVD

I 09:52:26 Write Type: DAO

I 09:52:26 Write Speed: MAX

I 09:52:26 Link Size: Auto

I 09:52:26 Test Mode: No

I 09:52:26 BURN-Proof: Enabled

I 09:52:26 Optimal L0 Data Zone Capacity: 1,285,296

I 09:52:26 Optimal L0 Data Zone Method: Copied From Original Disc

I 09:52:27 Filling Buffer... (40 MB)

I 09:52:28 Writing LeadIn...

I 09:52:42 Writing Image... (LBA: 0 - 2570591)

I 09:52:42 Writing Layer 0... (LBA: 0 - 1285295)

I 10:06:12 Writing Layer 1... (LBA: 1285296 - 2570591)

W 10:06:48 Failed to Write Sectors 1285616 - 1285647 - Write Error

W 10:06:48 Retrying (1 of 20)...

W 10:06:48 Retry Failed - Invalid Address For Write

W 10:06:48 Retrying (2 of 20)...

W 10:06:48 Retry Failed - Invalid Address For Write

W 10:06:48 Retrying (3 of 20)...

W 10:06:48 Retry Failed - Invalid Address For Write

W 10:06:48 Retrying (4 of 20)...

W 10:06:48 Retry Failed - Invalid Address For Write

W 10:06:48 Retrying (5 of 20)...

W 10:06:48 Retry Failed - Invalid Address For Write

W 10:06:48 Retrying (6 of 20)...

W 10:06:48 Retry Failed - Invalid Address For Write

W 10:06:48 Retrying (7 of 20)...

W 10:06:48 Retry Failed - Invalid Address For Write

W 10:06:48 Retrying (8 of 20)...

W 10:06:48 Retry Failed - Invalid Address For Write

W 10:06:48 Retrying (9 of 20)...

W 10:06:48 Retry Failed - Invalid Address For Write

W 10:06:48 Retrying (10 of 20)...

W 10:06:48 Retry Failed - Invalid Address For Write

W 10:06:48 Retrying (11 of 20)...

W 10:06:48 Retry Failed - Invalid Address For Write

W 10:06:48 Retrying (12 of 20)...

W 10:06:48 Retry Failed - Invalid Address For Write

W 10:06:48 Retrying (13 of 20)...

W 10:06:48 Retry Failed - Invalid Address For Write

W 10:06:48 Retrying (14 of 20)...

W 10:06:48 Retry Failed - Invalid Address For Write

W 10:06:48 Retrying (15 of 20)...

W 10:06:48 Retry Failed - Invalid Address For Write

W 10:06:48 Retrying (16 of 20)...

W 10:06:48 Retry Failed - Invalid Address For Write

W 10:06:48 Retrying (17 of 20)...

W 10:06:48 Retry Failed - Invalid Address For Write

W 10:06:48 Retrying (18 of 20)...

W 10:06:48 Retry Failed - Invalid Address For Write

W 10:06:48 Retrying (19 of 20)...

W 10:06:48 Retry Failed - Invalid Address For Write

W 10:06:48 Retrying (20 of 20)...

W 10:06:48 Retry Failed - Invalid Address For Write

W 10:50:23 Retrying (21)...

W 10:50:23 Retry Failed - Invalid Address For Write

W 10:50:25 Retrying (22)...

W 10:50:25 Retry Failed - Invalid Address For Write

W 10:50:26 Retrying (23)...

W 10:50:26 Retry Failed - Invalid Address For Write

E 10:52:16 Failed to Write Sectors 1285616 - 1285647 - Write Error

I 10:52:16 Synchronising Cache...

I 10:52:17 Closing Track...

I 10:52:28 Finalising Disc...

E 10:57:04 Failed to Write Image!

E 10:57:04 Operation Failed! - Duration: 01:04:37

I 10:57:04 Average Write Rate: 719 KB/s (0.5x) - Maximum Write Rate: 3,387 KB/s (2.4x)

Link to comment
Share on other sites

grab some verbatim discs, those ritek's aren't very good

 

So you are saying that these discs are all bad or that IB can't handle this type? They are Memorex discs which I thought was a good brand. I'd hate to have to throw $35 worth of DVD's in the garbage dump.

Link to comment
Share on other sites

it's not imgburn, it's a combination of bad disks and an older burner

 

by the way that's a premium single layer burner that was rebranded(benq 1640) and then marked up by plextor

 

your firmware is about 6 months older than the latest benq 1640 firmware

 

you could try the crossflash but it's rather complicated and confusing

 

http://club.cdfreaks.com/showthread.php?t=155281

 

http://club.cdfreaks.com/showthread.php?t=171380

 

many of the links are dead but the important ones work

 

there's no pressing reason to use dual layer for a data burn anyway, unless your trying to burn a 5 gig iso

Link to comment
Share on other sites

I will upgrade the firmware. Thanks.

 

I made an .ISO file because that is what I thought I had to do form reading the IB docs.

 

But since these are data files can I just drag a bunch of them to 2 single layer DVD discs? IB only seems to support one file at a time, not creating a project with multiple data files like CD software I use. Is this correct?

Link to comment
Share on other sites

???? I searched for new firmware but the version I have now is the latest

 

PLEXTOR PX-740A (OEM BENQ DW1640) - 1.02

 

I am also building a new computer now. What DVD-DL drive should I buy if I want to get a new one? What is best recommendations? Do DVD drives have SATA connections now?

Link to comment
Share on other sites

 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.