tej1210-Linda Posted September 25, 2007 Share Posted September 25, 2007 Hi Guys, Was wondering if you found that I need new firmware. I'm still having problems. Thanks for the help! Linda Here's the info you requested: TSSTcorp CD/DVDW TS-H652M 0414 (ATA) Current Profile: DVD+R Disc Information: Status: Empty Erasable: No Free Sectors: 2,295,104 Free Space: 4,700,372,992 bytes Free Time: 510:03:29 (MM:SS:FF) Supported Write Speeds: 4x, 8x, 12x, 16x Physical Format Information (ADIP): Disc ID: CMC MAG-M01-00 Book Type: DVD+R Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,491,711 Last Physical Sector in Layer 0: 0 Physical Format Information (Last Recorded): Disc ID: CMC MAG-M01-00 Book Type: DVD+R Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,491,711 Last Physical Sector in Layer 0: 0 Thanks! Link to comment Share on other sites More sharing options...
blutach Posted September 25, 2007 Share Posted September 25, 2007 It's easier for us if you stick to the one thread please. http://forum.imgburn.com/index.php?showtop...mp;p=53818& Regards Link to comment Share on other sites More sharing options...
dontasciime Posted September 25, 2007 Share Posted September 25, 2007 there is an SCO2 firmware but it might not go into your drive if yours is OEM Link to comment Share on other sites More sharing options...
chewy Posted September 25, 2007 Share Posted September 25, 2007 there is an SCO2 firmware but it might not go into your drive if yours is OEM I did a search on that crossflash, a mod fried his burner over at cdfreaks using non uniform(different size) firmwares, one person was going to try it with same size firmware but hasn't reported back very iffy Link to comment Share on other sites More sharing options...
dontasciime Posted September 25, 2007 Share Posted September 25, 2007 Firmware I download was this TS-H652M_SC02.bin Link to comment Share on other sites More sharing options...
chewy Posted September 25, 2007 Share Posted September 25, 2007 which is the generic tosh/sam firmware and is probably safe to try as long as you don't use the crossflasher sfdnwin (with nocheck) Link to comment Share on other sites More sharing options...
dontasciime Posted September 25, 2007 Share Posted September 25, 2007 binflash is what is supposed to be used even though its not listed Link to comment Share on other sites More sharing options...
chewy Posted September 25, 2007 Share Posted September 25, 2007 those oem's won't take the generic firmware with binflash Link to comment Share on other sites More sharing options...
dontasciime Posted September 25, 2007 Share Posted September 25, 2007 couldn't say 4 sure as I don't own one http://forums.afterdawn.com/thread_view.cfm/528098 Link to comment Share on other sites More sharing options...
chewy Posted September 25, 2007 Share Posted September 25, 2007 I read that thread earlier I removed Roxio completely. I can't update the firmware because Samsung says that it does not support this device. HP-Compaque must have received a shipload of this burner for next to nothing!!! I know what we would do before we pull and pitch the drive, but it would be in the interest of science and breaking things Link to comment Share on other sites More sharing options...
dontasciime Posted September 25, 2007 Share Posted September 25, 2007 Never spotted that bit, I would have a go if I owned the drive by changing Vendor Id might end up with dead drive but you can recover some mediatek based drives, if that one is. Shit drive anyway with no support Link to comment Share on other sites More sharing options...
Recommended Posts