burn problem

[tej1210-Linda]

Hi Guys,

Was wondering if you found that I need new firmware. I'm still having problems.

Thanks for the help!

Linda

 

Here's the info you requested:

 

TSSTcorp CD/DVDW TS-H652M 0414 (ATA)

Current Profile: DVD+R

 

Disc Information:

Status: Empty

Erasable: No

Free Sectors: 2,295,104

Free Space: 4,700,372,992 bytes

Free Time: 510:03:29 (MM:SS:FF)

Supported Write Speeds: 4x, 8x, 12x, 16x

 

Physical Format Information (ADIP):

Disc ID: CMC MAG-M01-00

Book Type: DVD+R

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

Track Path: Parallel Track Path (PTP)

Linear Density: 0.267 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 2,491,711

Last Physical Sector in Layer 0: 0

 

Physical Format Information (Last Recorded):

Disc ID: CMC MAG-M01-00

Book Type: DVD+R

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

Track Path: Parallel Track Path (PTP)

Linear Density: 0.267 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 2,491,711

Last Physical Sector in Layer 0: 0

Thanks!

[blutach]

It's easier for us if you stick to the one thread please.

 

http://forum.imgburn.com/index.php?showtop...mp;p=53818&

 

Regards

[dontasciime]

there is an SCO2 firmware but it might not go into your drive if yours is OEM

[chewy]

there is an SCO2 firmware but it might not go into your drive if yours is OEM

 

 

I did a search on that crossflash, a mod fried his burner over at cdfreaks using non uniform(different size) firmwares, one person was going to try it with same size firmware but hasn't reported back

 

very iffy

[dontasciime]

Firmware I download was this TS-H652M_SC02.bin

[chewy]

which is the generic tosh/sam firmware

and is probably safe to try as long as you don't use the crossflasher sfdnwin (with nocheck)

[dontasciime]

binflash is what is supposed to be used even though its not listed

[chewy]

those oem's won't take the generic firmware with binflash

[dontasciime]

couldn't say 4 sure as I don't own one

 

http://forums.afterdawn.com/thread_view.cfm/528098

[chewy]

I read that thread earlier

 

I removed Roxio completely.

I can't update the firmware because Samsung says that it does not support this device. HP-Compaque must have received a shipload of this burner for next to nothing!!!

 

I know what we would do before we pull and pitch the drive, but it would be in the interest of science and breaking things

[dontasciime]

Never spotted that bit, I would have a go if I owned the drive by changing Vendor Id might end up with dead drive but you can recover some mediatek based drives, if that one is.

 

Shit drive anyway with no support