Set ImgBurn write speed

[tom3d]

I have ImgBurn v2.3.2.0 installed and trying to burn an ISO image at 4x to a 10x CD-RW. I set the Write Speed to 4x in the Settings section and ImgBurn still write at 10x according to the Information section below. I must be reading this information wrong or have not setup ImgBurn properly?

 

Information

Device: _NEC DVD_RW ND-3540A (E:) Write Retries: 0

Copy: 1 of 1 (Write Speed: 4x) <-- Here Write Rate: 1,499 KB/s (10.0x) <-- Here

Sectors: 9,152 Time Elapsed: 00:00:32

Size: 18,743,296 bytes Time Remaining: 00:07:44

Time: 02:04:02 (MM:SS:FF)

 

Windows XP Pro SP2

 

tom3D

[mmalves]

If the speed you're selecting isn't listed as a Supported Write Speed (depends on your burner/media combo) then your burner will use the closest speed available to the one you've selected.

[chewy]

nec's make some of the best cd burning dvd burners, you should be good at 16 or 32x with quality media

 

cd-rw's are iffy to start out with