Ms.Thang Posted September 28, 2007 Posted September 28, 2007 (edited) I recentlty have been experiencing problems burning. I was using DVD shrink and the last version of DVD decrypter....For a while I even had DVD 4free or something with a smily face running in the background in orfer to be able to rip and burn certain protected DVDs....All this leads up to to me unintsalling the DVD 4free thing and installing imgburn to replace the old decrypter. (i only gave all of the background info in case this helps with the solution.) SO I successfully ripped I think I love my W ife with DVD Shrink but in IMG burn i get the following message: I 07:14:35 ImgBurn Version 2.3.2.0 started! I 07:14:35 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 07:14:35 Total Physical Memory: 522,224 KB - Available: 149,484 KB I 07:14:35 Initialising SPTI... I 07:14:35 Searching for SCSI / ATAPI devices... I 07:14:35 Found 1 DVD Edited September 28, 2007 by Ms.Thang
chewy Posted September 28, 2007 Posted September 28, 2007 welcome to the forum here we go again, an old burner, dell meets newer media(cruddy new media) this page tells us there is a slightly newer dell firmware, unfortunately the dell firmware might not support those disks http://liggydee.cdfreaks.com/page/en/NEC-ND-3530A/ try the 104C download and extract it to a new folder on your desktop get binflash 32gui from the same page and extract it there also boot into safe mode with drive empty and execute binflash test new firmware after flashing and rebooting set burn speed to 4x if that doesn't work try to find some good 8X media also use the tool/driver filter load order and see if an older program left anything on your computer
Recommended Posts