Potential 'WaitImmediateIO' Deferred Error?

[81RED]

Taken from the log file:

 

I 17:31:29 Source File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER!

I 17:31:29 Source File Implementation Identifier: ImgBurn

I 17:31:29 Source File File System(s): ISO9660; UDF (1.02)

I 17:31:29 Destination Device: [0:1:0] PLEXTOR DVDR PX-810SA 1.00 (D:) (ATAPI)

I 17:31:29 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) (Speeds: 4x; 6x; 8x; 12x; 16x; 18x)

I 17:31:29 Destination Media Sectors: 2.297.888

I 17:31:29 Write Mode: DVD

I 17:31:29 Write Type: DAO

I 17:31:29 Write Speed: 16x

I 17:31:29 Link Size: Auto

I 17:31:29 Test Mode: No

I 17:31:29 BURN-Proof: Enabled

I 17:31:30 Filling Buffer... (40 MB)

I 17:31:30 Writing LeadIn...

I 17:32:03 Writing Image... (LBA: 0 - 2268191)

I 17:37:06 Synchronising Cache...

W 17:37:18 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Write Error

I 17:37:33 Image MD5: 7ecac93c31f73fb18c42471ffc0b079d

I 17:37:33 Operation Successfully Completed! - Duration: 00:06:03

I 17:37:33 Average Write Rate: 14.971 KB/s (10.8x) - Maximum Write Rate: 22.123 KB/s (16.0x)

I 17:37:33 Cycling Tray before Verify...

I 17:37:57 Device Ready!

I 17:37:57 Operation Started!

I 17:37:57 Source Device: [0:1:0] PLEXTOR DVDR PX-810SA 1.00 (D:) (ATAPI)

I 17:37:57 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: MCC 03RG20) (Speeds: 4x; 6x; 8x; 12x; 16x; 18x)

I 17:37:57 Image File: -==/\/[bUILD IMAGE]\/\==-

I 17:37:57 Image File Sectors: 2.268.192 (MODE1/2048)

I 17:37:57 Image File Size: 4.645.257.216 bytes

I 17:37:57 Image File Volume Identifier: Bug

I 17:37:57 Image File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER!

I 17:37:57 Image File Implementation Identifier: ImgBurn

I 17:37:57 Image File File System(s): ISO9660; UDF (1.02)

I 17:37:57 Verifying Sectors... (LBA: 0 - 2268191)

I 17:44:23 Device MD5: 7ecac93c31f73fb18c42471ffc0b079d

I 17:44:23 Image MD5: 7ecac93c31f73fb18c42471ffc0b079d

I 17:44:26 Operation Successfully Completed! - Duration: 00:06:25

 

 

When I got the error I hit "retry" and it immediately finished the session. The verify afterwards went fine as well.

Is my burner on the brink? I use only Verbatim media, so it's not likely thats where the problem lies.

 

Tia,

 

Simon

[LIGHTNING UK!]

Slow the burn down to 12x or 8x. Check for firmware updates... just the usual stuff really!