Jump to content

Recommended Posts

Posted

Hello!

I've been getting failed burns recently. I have AnyDVD installed but exit from the program before using ImgBurn. After the burn I get an error message saying that there was a problem synchronising the cache. I click on "Retry" (not the "Cancel" option), then I get a message saying the operation was completed successfully. (log below) Unfortunately the window in ImgBurn then says that the disc is incomplete. Is there a possible conflict with AnyDVD although the program is turned off? Is there another relatively up to date program you can suggest to remove copy protection that doesn't conflict with ImgBurn?

 

Cheers!

 

 

; //****************************************\\

; ImgBurn Version 2.3.2.0 - Log

; Tuesday, 09 October 2007, 14:27:15

; \\****************************************//

;

;

I 14:15:14 ImgBurn Version 2.3.2.0 started!

I 14:15:14 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 14:15:14 Total Physical Memory: 1,047,344 KB - Available: 486,656 KB

I 14:15:14 Initialising SPTI...

I 14:15:14 Searching for SCSI / ATAPI devices...

I 14:15:14 Found 1 DVD-ROM, 1 DVD-ROM/CD-RW and 1 DVD±RW!

I 14:15:23 Operation Started!

I 14:15:23 Source File: C:\Documents and Settings\Brain\Desktop\WEBB_PIERCE_CHET_ATKINS.iso

I 14:15:23 Source File Sectors: 1,610,608 (MODE1/2048)

I 14:15:23 Source File Size: 3,298,525,184 bytes

I 14:15:23 Source File Volume Identifier: WEBB_PIERCE_CHET_ATKINS

I 14:15:23 Source File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER!

I 14:15:23 Source File Implementation Identifier: ImgBurn

I 14:15:23 Source File File System(s): ISO9660, UDF (1.02)

I 14:15:23 Destination Device: [0:0:0] SONY DVD RW DRU-720A JY08 (H:) (USB)

I 14:15:23 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) (Speeds: 6x, 8x, 12x, 16x)

I 14:15:23 Destination Media Sectors: 2,298,496

I 14:15:23 Write Mode: DVD

I 14:15:23 Write Type: DAO

I 14:15:23 Write Speed: 1x

I 14:15:23 Link Size: Auto

I 14:15:23 Test Mode: No

I 14:15:23 BURN-Proof: Enabled

I 14:15:24 Filling Buffer... (40 MB)

I 14:15:27 Writing LeadIn...

I 14:16:32 Writing Image... (LBA: 0 - 1610607)

I 14:23:11 Synchronising Cache...

W 14:26:29 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Write Error

I 14:26:59 Image MD5: 8a8ce4fdfc67c7b35a3afd2a3a0db6db

I 14:27:00 Operation Successfully Completed! - Duration: 00:11:36

I 14:27:00 Average Write Rate: 8,073 KB/s (5.8x) - Maximum Write Rate: 8,388 KB/s (6.1x)

I 14:27:15 Close Request Acknowledged

I 14:27:15 Closing Down...

I 14:27:15 Shutting down SPTI...

I 14:27:15 ImgBurn closed!

Posted

Have you only tried 1x (or 6x which is the drive's lowest supported write speed) ?

 

Give it a go at 8x, 12x and 16x. You might find you have more luck.

 

For the disc saying it's incomplete, try using the Tools -> Drive -> Close (Track/Session/Disc) options.

 

AnyDVD doesn't conflict with ImgBurn, it's just that it can modify the data read from the drive during a verify (after a burn) and make 'miscompare' errors pop up.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.