DVDs wont Play on DVD player

[kvalsnake]

Hi, I NEED HELP !!! I installed a new DVD burner Because my old one died Its the same dell model that was in my pc before

But now when I burn a movie it plays great on my pc but wont play on my DVD player. This is my ImgBurn log

 

I 19:43:01 ImgBurn Version 2.3.2.0 started!

I 19:43:01 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)

I 19:43:01 Total Physical Memory: 2,357,324 KB - Available: 1,907,808 KB

I 19:43:01 Initialising SPTI...

I 19:43:01 Searching for SCSI / ATAPI devices...

I 19:43:01 Found 1 DVD±RW!

W 19:43:01 Failed to focus Panel_ISOWRITE_DestinationDevices

I 19:43:01 Operation Started!

I 19:43:01 Source File: C:\Documents and Settings\Karl\My Documents\DVD\dvd.iso

I 19:43:01 Source File Sectors: 2,143,488 (MODE1/2048)

I 19:43:01 Source File Size: 4,389,863,424 bytes

I 19:43:01 Source File Volume Identifier: DVD

I 19:43:01 Source File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER!

I 19:43:01 Source File Implementation Identifier: ImgBurn

I 19:43:01 Source File File System(s): ISO9660, UDF (1.02)

I 19:43:01 Destination Device: [0:0:0] _NEC DVD+-RW ND-3450A 103C (D (ATA)

I 19:43:01 Destination Media Type: DVD+R (Disc ID: RICOHJPN-R03-04) (Speeds: 2.4x, 4x, 6x, 8x, 12x, 16x)

I 19:43:01 Destination Media Sectors: 2,295,104

I 19:43:01 Write Mode: DVD

I 19:43:01 Write Type: DAO

I 19:43:01 Write Speed: MAX

I 19:43:01 Link Size: Auto

I 19:43:01 Test Mode: No

I 19:43:01 BURN-Proof: Enabled

I 19:43:02 Filling Buffer... (40 MB)

I 19:43:03 Writing LeadIn...

I 19:43:25 Writing Image... (LBA: 0 - 2143487)

I 19:48:28 Synchronising Cache...

I 19:48:29 Closing Track...

I 19:48:50 Finalising Disc...

I 19:49:02 Image MD5: 27a6e4d4b97eb4c8cffd3c0c332bc09b

I 19:49:02 Operation Successfully Completed! - Duration: 00:06:00

I 19:49:02 Average Write Rate: 14,195 KB/s (10.2x) - Maximum Write Rate: 21,556 KB/s (15.6x)

I 19:49:02 Cycling Tray before Verify...

I 19:49:21 Device Ready!

I 19:49:26 Operation Started!

I 19:49:26 Source Device: [0:0:0] _NEC DVD+-RW ND-3450A 103C (D (ATA)

I 19:49:26 Source Media Type: DVD+R (Book Type: DVD-ROM) (Disc ID: RICOHJPN-R03-04) (Speeds: 2.4x, 4x, 6x, 8x, 12x, 16x)

I 19:49:26 Image File: C:\Documents and Settings\Karl\My Documents\DVD\dvd.iso

I 19:49:26 Image File Sectors: 2,143,488 (MODE1/2048)

I 19:49:26 Image File Size: 4,389,863,424 bytes

I 19:49:26 Image File Volume Identifier: DVD

I 19:49:26 Image File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER!

I 19:49:26 Image File Implementation Identifier: ImgBurn

I 19:49:26 Image File File System(s): ISO9660, UDF (1.02)

I 19:49:27 Verifying Sectors... (LBA: 0 - 2143487)

I 19:54:13 Device MD5: 27a6e4d4b97eb4c8cffd3c0c332bc09b

I 19:54:13 Image MD5: 27a6e4d4b97eb4c8cffd3c0c332bc09b

I 19:54:13 Operation Successfully Completed! - Duration: 00:04:47

I 19:54:13 Average Verify Rate: 15,042 KB/s (10.9x) - Maximum Verify Rate: 21,600 KB/s (15.6x)

Thanks, Karl

Edited October 15, 2007 by kvalsnake

[chewy]

welcome to ISF

 

try lowering your burnspeed to 8X or lower

 

those ricoh disks are not very good

 

your burner seems to be OK tho

 

 

sounds like your player does not like dvd+r's

[chewy]

I would try some verbatim dvd-r burned at 8x

[kvalsnake]

welcome to ISF

 

try lowering your burnspeed to 8X or lower

 

those ricoh disks are not very good

 

your burner seems to be OK tho

 

 

sounds like your player does not like dvd+r's

 

 

I already tried lowering the speed and it didnt work, The disks are the same ones I used before my dvd burner broke and they worked on my dvd player, Could it be anything else???

[chewy]

It's kind of hard to imagine anyone getting that old a burner as a replacement, are you sure that it was replaced when it was worked on?

 

That burner is about 2 1/2 years old

 

and that's a long time for dvd burners

[kvalsnake]

It's kind of hard to imagine anyone getting that old a burner as a replacement, are you sure that it was replaced when it was worked on?

 

That burner is about 2 1/2 years old

 

and that's a long time for dvd burners

 

I dont know much about pc so I told dell to send me the sameone that I have. and I put it in

[chewy]

have you checked older burns to see if they are still playing in your player?

 

have you checked the newer ones in another player?

[volvofl10]

The disks are the same ones I used before my dvd burner broke and they worked on my dvd player,

 

Can you confirm that the ink/dye code hasn't been changed by the manufacturer ?( not obvious untill you check what the media ID is)

the majority of modern ( recent few years) dvd players will play -R media ,so you need to eliminate the basics first , go with what Chewy said, and try some decent 8x -R media ( Taiyo yuden or verbatim), see what happens with that