Device not ready

[jonidnmk]

I have a movie ready to burn to dvd. I have loaded the latest firmware on the dvd drive (NEC+RW ND-1100).

The last line on ImgBurn Log is:

Found 1 DVD-ROM and 1 DVD+RW!

On the bottom of the ImgBurn window it displays:

Device not ready (Medium Not Present)

 

Is this a hardware problem?

 

thanks

[cornholio7]

are you using a +R disc or a -R disc?

look on the packaging of the disc, your drive is only able to burn +R

[jonidnmk]

are you using a +R disc or a -R disc?

look on the packaging of the disc, your drive is only able to burn +R

 

I put in the +R dvd and it looked like it was working. But now I am getting an error:

ScsiStatus:0x02

Interpretation:Check condition

CDB: 28 00 00 0A 35 D0 00 00 01 00

Interpretation: Read (10) - Sector 669136

Sense Area: F0 00 03 00 0A 35 D0 0A 00 00 00 00 02 00 00 00 00 00

Interpretation: No seek Complete

 

I clicked 'try again' and got the same error.

 

Thanks for you help!

[dontasciime]

pop a blank in and switch to write mode and copy the info from the right hand side pane and post in here.

 

That drive is really old now you should look to replace it asap

[jonidnmk]

pop a blank in and switch to write mode and copy the info from the right hand side pane and post in here.

 

That drive is really old now you should look to replace it asap

 

What do you mean by that? Do I close down the error window?

[dontasciime]

 

 

The highlighted text at Right in picture or just post the full log file from help menu

[jonidnmk]

 

 

The highlighted text at Right in picture or just post the full log file from help menu

 

This is from the imgburn.txt file:

I 11:12:08 ImgBurn Version 2.3.2.0 started!

I 11:12:08 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)

I 11:12:08 Total Physical Memory: 523,268 KB - Available: 218,320 KB

I 11:12:08 Initialising SPTI...

I 11:12:08 Searching for SCSI / ATAPI devices...

I 11:12:08 Found 1 DVD-ROM and 1 DVD+RW!

I 13:22:33 Operation Started!

I 13:22:33 Source File: C:\Documents and Settings\Joan\My Documents\DVD\dvd.iso

I 13:22:33 Source File Sectors: 2,136,704 (MODE1/2048)

I 13:22:33 Source File Size: 4,375,969,792 bytes

I 13:22:33 Source File Volume Identifier: DVD

I 13:22:33 Source File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER!

I 13:22:33 Source File Implementation Identifier: ImgBurn

I 13:22:33 Source File File System(s): ISO9660, UDF (1.02)

I 13:22:33 Destination Device: [1:1:0] _NEC DVD+RW ND-1100A 10GE (E:) (ATA)

I 13:22:33 Destination Media Type: DVD+R (Speeds: 2.4x, 4x)

I 13:22:33 Destination Media Sectors: 2,295,104

I 13:22:33 Write Mode: DVD

I 13:22:33 Write Type: DAO

I 13:22:33 Write Speed: MAX

I 13:22:33 Link Size: Auto

I 13:22:33 Test Mode: No

I 13:22:33 BURN-Proof: Enabled

I 13:22:35 Filling Buffer... (20 MB)

I 13:22:41 Writing LeadIn...

I 13:22:52 Writing Image... (LBA: 0 - 2136703)

W 13:23:56 Waiting for buffers to recover...

W 13:24:10 Waiting for hard disk activity to reach threshold level...

I 13:24:34 Writing Image...

W 13:25:07 Waiting for buffers to recover...

W 13:25:25 Waiting for hard disk activity to reach threshold level...

I 13:25:31 Writing Image...

W 13:31:56 Waiting for buffers to recover...

W 13:32:10 Waiting for hard disk activity to reach threshold level...

I 13:32:12 Writing Image...

W 13:32:30 Waiting for buffers to recover...

W 13:32:42 Waiting for hard disk activity to reach threshold level...

I 13:32:44 Writing Image...

I 13:37:48 Synchronising Cache...

I 13:37:49 Closing Track...

I 13:37:58 Finalising Disc...

I 13:38:07 Image MD5: de5d4e63e86f5f99cb00a624abf75b12

I 13:38:07 Operation Successfully Completed! - Duration: 00:15:34

I 13:38:07 Average Write Rate: 4,774 KB/s (3.4x) - Maximum Write Rate: 5,750 KB/s (4.2x)

I 13:38:07 Cycling Tray before Verify...

I 13:38:33 Device Ready!

I 13:38:34 Operation Started!

I 13:38:34 Source Device: [1:1:0] _NEC DVD+RW ND-1100A 10GE (E:) (ATA)

I 13:38:34 Source Media Type: DVD+R (Book Type: DVD-ROM) (Disc ID: RICOHJPN-R01-02) (Speeds: 2.4x, 4x)

I 13:38:34 Image File: C:\Documents and Settings\Joan\My Documents\DVD\dvd.iso

I 13:38:34 Image File Sectors: 2,136,704 (MODE1/2048)

I 13:38:34 Image File Size: 4,375,969,792 bytes

I 13:38:34 Image File Volume Identifier: DVD

I 13:38:34 Image File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER!

I 13:38:34 Image File Implementation Identifier: ImgBurn

I 13:38:34 Image File File System(s): ISO9660, UDF (1.02)

I 13:38:34 Verifying Sectors... (LBA: 0 - 2136703)

E 14:34:43 Failed to Read Sector 669136 - No Seek Complete

E 14:34:43 Sector 669136 maps to File: VIDEO_TS\VTS_01_2.VOB

E 14:34:43 Failed to Verify Sectors!

E 14:34:43 Operation Failed! - Duration: 00:56:09

I 14:34:43 Average Verify Rate: 397 KB/s (0.3x) - Maximum Verify Rate: 4,489 KB/s (3.2x)

I 14:34:43 Close Request Acknowledged

I 14:34:43 Closing Down...

I 14:34:47 Shutting down SPTI...

I 14:34:48 ImgBurn closed!

[cornholio7]

your drive doesn't like those discs, try verbatim or taiyo yuden , but as donta already said, it might be easier just to buy a new drive as the one you have is old

[jonidnmk]

your drive doesn't like those discs, try verbatim or taiyo yuden , but as donta already said, it might be easier just to buy a new drive as the one you have is old

 

I have a newer dell and I'd like to try to burn the movie on that system. Can I just copy the files over to the other dell - or do I have to download the movie again and go through the long process again? If I can copy the files, what files do I need to copy to the other computer?

[dontasciime]

check the FAQ on removing IDE controller from device manager to rule out DMA issues

[jonidnmk]

check the FAQ on removing IDE controller from device manager to rule out DMA issues

 

I know this is an old computer and drive, is there any way I could copy the files to a newer computer and burn it on that one?

What files would I need?

[cornholio7]

if they are networked, either transfer the dvd.iso to the other pc or burn across the network