wanghiking Posted November 16, 2007 Posted November 16, 2007 I have a Benq dual layer DVD burner, and I use the newest edition of Imgburn to burn XBOX360's D9 rom. But starting from yesterday, I already wasted 10 dual layer blank disks, as each time I was using Imgburn, in writing lead in, always failed as "Session Fixation Error Writing Lead In", no disk can be burned any more. While if I use the same burner for D5 or CD, it's working. I need to indenty where the problem is. Whether it's my system problem? Software problem or my Dvd burner problem? Can anyone give me a hand? Thank you.
wanghiking Posted November 16, 2007 Author Posted November 16, 2007 The log as follows: I 05:52:30 Found 1 DVD-ROM/CD-RW and 1 DVD±RW! I 05:52:53 Operation Started! I 05:52:53 Source File: F:\Mass_Effect_USA_XBOX360-PROTOCOL\ptc-me.dvd I 05:52:53 Source File Sectors: 3,825,924 (MODE1/2048) I 05:52:53 Source File Size: 7,835,492,352 bytes I 05:52:53 Source File Volume Identifier: XGD2DVD_NTSC I 05:52:53 Source File Implementation Identifier: Sonic Scenarist 3.1 I 05:52:53 Source File File System(s): ISO9660, UDF (1.02) I 05:52:53 Destination Device: [0:0:0] BENQ DVD DD EW162I 47N9 (K:) (USB) I 05:52:53 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x) I 05:52:53 Destination Media Sectors: 4,173,824 I 05:52:53 Write Mode: DVD I 05:52:53 Write Type: DAO I 05:52:53 Write Speed: MAX I 05:52:53 Link Size: Auto I 05:52:53 Test Mode: No I 05:52:53 BURN-Proof: Enabled I 05:52:53 Optimal L0 Data Zone Capacity: 1,913,760 I 05:52:53 Optimal L0 Data Zone Method: Copied From Original Disc I 05:52:54 Filling Buffer... (40 MB) I 05:52:56 Writing LeadIn... W 05:53:10 Failed to Write Sectors 0 - 31 - Session Fixation Error Writing Lead In W 05:53:10 Retrying (1 of 20)... W 05:57:42 Retry Failed - Power Calibration Area Is Full E 05:57:55 Failed to Write Sectors 0 - 31 - Session Fixation Error Writing Lead In I 05:57:55 Synchronising Cache... I 05:57:56 Closing Track... I 05:57:57 Finalising Disc... E 05:57:59 Finalise Disc Failed! - Reason: Invalid Field in CDB I 05:57:59 Finalising Disc (Last Attempt!)... E 05:57:59 Finalise Disc Failed! - Reason: Invalid Field in CDB E 05:57:59 Failed to Write Image! E 05:57:59 Operation Failed! - Duration: 00:05:05 I 05:57:59 Average Write Rate: N/A - Maximum Write Rate: N/A I 05:58:10 Close Request Acknowledged I 05:58:10 Closing Down... I 05:58:10 Shutting down SPTI... I 05:58:10 ImgBurn closed!
LIGHTNING UK! Posted November 16, 2007 Posted November 16, 2007 You might find that media is newer than the drives firmware - as such, it won't burn it. Get yourself some Verbatim 2.4x DVD+R DL discs instead. btw, you can get the 47P9 firmware from here: http://www.benq.com.tw/support/downloads/d...fm?product=2346
wanghiking Posted November 16, 2007 Author Posted November 16, 2007 thank you for your kind reply. But for the media itself, I had been using this kinda DL discs for almost a year, never brings me any problem. Only recently I reinstalled my XP.
wanghiking Posted November 16, 2007 Author Posted November 16, 2007 Yes, the firmware is a possible solution, but it's not working. Wasted another disc. Just all of a sudden. Can no longer burn DVD DL
LIGHTNING UK! Posted November 17, 2007 Posted November 17, 2007 You've been burning RITEK-S04-66 for over a year? I can't say as I've seen that specific dye up until very recently.
wanghiking Posted November 17, 2007 Author Posted November 17, 2007 Yes, seriously, over a year, Ritek works fine for me. I am just afraid that the burner might have some problem...judging from the log, is it appearing to having some problem? But I tested with CDR and DVD-R, both OK.
LIGHTNING UK! Posted November 17, 2007 Posted November 17, 2007 Google 'RITEK-S04-66' and you get 10 hits. There's no way that dye has been around for a year. You might well have been burning A RITEK dye but it wasn't that specific one. Get some media that's known to be decent - i.e. the Verbs I suggested earlier and try again. If they fail too then yeah it's your drive.
wanghiking Posted November 17, 2007 Author Posted November 17, 2007 Is there a possibility that a drive can burn CD DVD, but DVD DL burning mal-function? I would also like to know that it's just the media's problem rather than the hardware problem, as the burner never gave me problem before. And I love ImgBurn.
polopony Posted November 17, 2007 Posted November 17, 2007 hardware fails thats a fact ,but the last good media Ritek made was their GO4 -R 3-4 years ago the GO5's and newer have been crap.Like LUK said give the Verbs a try worse case is its the drive but you'll still have some excellent media at hand
wanghiking Posted November 17, 2007 Author Posted November 17, 2007 you guys might be right. I tried another 5 discs, one of them can write lead-in, but when it's 50%, it failed. I already put order of Verbatims DLs...hope it works. Thank you.
Recommended Posts