I/O error while verifying burned DVD Video image

[Sliztzan]

Hello,

 

Please tell me the cause of this DVD Video error, I've seen similar to this before with Ritek Media, but this is Verbatim:

 

I 20:30:47 ImgBurn Version 2.3.2.0 started!

I 20:30:48 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 20:30:48 Total Physical Memory: 3,143,404 KB - Available: 2,222,328 KB

I 20:30:48 Initialising SPTI...

I 20:30:48 Searching for SCSI / ATAPI devices...

I 20:30:48 Found 2 DVD-ROMs and 2 DVD±RWs!

I 20:30:56 Operation Started!

I 20:30:56 Source File: E:\DVD_ROOT\Red Hat\DDD.MDS

I 20:30:56 Source File Sectors: 3,523,840 (MODE1/2048)

I 20:30:56 Source File Size: 7,216,824,320 bytes

I 20:30:56 Source File Volume Identifier: RED HAT

I 20:30:56 Source File Application Identifier: DVD Studio Pro:4.0.3, DSPInterface:382, DVDAuthoring:372, DVDBase:396(Encoder: 483), Oxygene:409

I 20:30:56 Source File Implementation Identifier: Apple Computer, Inc.

I 20:30:56 Source File File System(s): ISO9660, UDF (1.02)

I 20:30:56 Destination Device: [2:0:0] PLEXTOR DVDR PX-755A 1.07 (F:) (ATA)

I 20:30:56 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x)

I 20:30:56 Destination Media Sectors: 4,173,824

I 20:30:56 Write Mode: DVD

I 20:30:56 Write Type: DAO

I 20:30:56 Write Speed: 2.4x

I 20:30:56 Link Size: Auto

I 20:30:56 Test Mode: No

I 20:30:56 BURN-Proof: Enabled

I 20:31:07 Optimal L1 Data Zone Start LBA: 1931008 (VTS_01, PGC: 1, Cell: 30, Vob/Cell ID: 1/30, Time: 01:13:47, SPLIP: No)

I 20:31:07 Optimal L0 Data Zone Capacity: 1,931,008

I 20:31:07 Optimal L0 Data Zone Method: IFO Cell Boundary, 'SPLIP' Flag Not Set

I 20:31:07 Filling Buffer... (40 MB)

I 20:31:08 Writing LeadIn...

I 20:31:43 Writing Image... (LBA: 0 - 3523839)

I 20:31:43 Writing Layer 0... (LBA: 0 - 1931007)

I 20:51:33 Writing Layer 1... (LBA: 1931008 - 3523839)

I 21:07:57 Synchronising Cache...

I 21:08:01 Closing Track...

I 21:08:03 Finalising Disc...

I 21:12:31 Image MD5: 07de910e035b557da44aa0cb250f53fb

I 21:12:34 Operation Successfully Completed! - Duration: 00:41:35

I 21:12:34 Average Write Rate: 3,243 KB/s (2.3x) - Maximum Write Rate: 3,387 KB/s (2.4x)

I 21:12:34 Cycling Tray before Verify...

I 21:12:55 Device Ready!

I 21:12:56 Operation Started!

I 21:12:56 Source Device: [2:0:0] PLEXTOR DVDR PX-755A 1.07 (F:) (ATA)

I 21:12:56 Source Media Type: DVD-ROM (Book Type: DVD-ROM) (Speeds: 2.4x, 4x, 6x, 8x, 12x, 16x)

I 21:12:56 Image File: E:\DVD_ROOT\Red Hat\DDD.MDS

I 21:12:56 Image File Sectors: 3,523,840 (MODE1/2048)

I 21:12:56 Image File Size: 7,216,824,320 bytes

I 21:12:56 Image File Volume Identifier: RED HAT

I 21:12:56 Image File Application Identifier: DVD Studio Pro:4.0.3, DSPInterface:382, DVDAuthoring:372, DVDBase:396(Encoder: 483), Oxygene:409

I 21:12:56 Image File Implementation Identifier: Apple Computer, Inc.

I 21:12:56 Image File File System(s): ISO9660, UDF (1.02)

I 21:12:56 Verifying Sectors... (LBA: 0 - 3523839)

I 21:12:56 Verifying Layer 0... (LBA: 0 - 1931007)

E 21:21:19 Failed to Read Sector 1929984 - L-EC Uncorrectable Error

E 21:21:19 Sector 1929984 maps to File: VIDEO_TS\VTS_01_4.VOB

E 21:21:19 Failed to Verify Sectors!

E 21:21:20 Operation Failed! - Duration: 00:08:23

I 21:21:20 Average Verify Rate: 7,673 KB/s (5.5x) - Maximum Verify Rate: 15,878 KB/s (11.5x)

I 21:24:11 Close Request Acknowledged

I 21:24:11 Closing Down...

I 21:24:11 Shutting down SPTI...

I 21:24:11 ImgBurn closed!

 

Thank you!

[blutach]

You have a simple verify error near the edge of the disk. Could be the disk, the drive or firmware.

 

Update your firmware - http://forum.rpc1.org/dl_firmware.php?download_id=2210

 

And, if possible, select the layer break closer to 50/50 (this would have burned only to about LBA 1,762,000 and then got to layer one, eliminating the more dangerous edge of disk).

 

Regards

[Sliztzan]

You have a simple verify error near the edge of the disk. Could be the disk, the drive or firmware.

 

Update your firmware - http://forum.rpc1.org/dl_firmware.php?download_id=2210

 

And, if possible, select the layer break closer to 50/50 (this would have burned only to about LBA 1,762,000 and then got to layer one, eliminating the more dangerous edge of disk).

 

Regards

 

The forum is down, I'll try another time.

 

I selected PGC 1 which I thought was the beginning of the VOB. How do I select (to about LBA 1,762,000) 50/50?

Looks like that selection isn't close. Extract the image to vob's and try again?

 

Edited November 18, 2007 by Sliztzan

[blutach]

Those are all the same LB point. If you want to make it closer to 50/50, extract the files, as you say and split the previous cell (cell 29, VCID 1/29) using VobBlanker.

 

Regards