Burn Baby Burn Posted November 27, 2007 Share Posted November 27, 2007 Hi I have a pioneer 107D and Liteon 1619S and a friend has a Pioneer (I forget model but it's a few years old) We both have problems burning discs sometimes it's "Power Calibration" and can't start but very recently for both of us discs burn without errors but neither DVD-players or the PC can read them the PC shows them as blank We were talking about it the other night and that we both have the very same problem using different software (img burn, Nero, Cheetah) We try different brands (I mostly use T.Y) we were wondering if there is a way to check the burners motor/lens/laser a utility that can test the lasers burn strength that can tell if it is becoming weak or is not aligned properly just becuase burners are cheap doesn't mean I should buy one unless the old one is really faulty. There are programs like DVD info to test the disc dye and burn quality Is there a utility to test a burners laser quality and strength ? ........... could be useful ! For anyone reading this with a similiar problem looking for an answer .......... one solution we found is before burning to ## turn OFF ## (not restart) the PC ...... then turn PC on and burn but no more than 2 discs ....... Turn off and turn on a again etc ........ the turning off / on seems refresh burner working with the software For me it's weird as the Pioneer is old but the Lite-on is only 2 years old strange it's happening to both ....... oh yes we have virus programs etc and latest firmware. any .............. know all's around here . Link to comment Share on other sites More sharing options...
lfcrule1972 Posted November 27, 2007 Share Posted November 27, 2007 I have never seen one - what does the ImgBurn log say when the burn is complete ? Please could you post a copy of it here so we can take a look ? Also a copy of the exact error message would be really useful too. Link to comment Share on other sites More sharing options...
dontasciime Posted November 27, 2007 Share Posted November 27, 2007 untick test mode maybe. Or open up drives and look directly at laser, if you go blind it's working, if you were blind already and now you can see, it's working. Link to comment Share on other sites More sharing options...
LOCOENG Posted November 27, 2007 Share Posted November 27, 2007 (edited) untick test mode maybe. Or open up drives and look directly at laser, if you go blind it's working, if you were blind already and now you can see, it's working. "Power Calibration" Just to contribute a little bit....power calibration (if you don't already know) 1. Cheap media, you state you typically use TY's so shouldn't be a problem. 2. Bad power from PSU or bad PSU, check connections and cables and maybe try different ones. 3. Burner has one foot in grave, replace drive. Since we assume the media is good and we don't want to buy a new drive if it isn't necessary I would try the connections and cable route...just to rule that out as well. Edited November 27, 2007 by LOCOENG Link to comment Share on other sites More sharing options...
spinningwheel Posted November 28, 2007 Share Posted November 28, 2007 the Pioneer is old but the Lite-on is only 2 years old Try using a cleaner disc or it's time to buy a new one! Link to comment Share on other sites More sharing options...
volvofl10 Posted November 28, 2007 Share Posted November 28, 2007 untick test mode maybe. Or open up drives and look directly at laser, if you go blind it's working, if you were blind already and now you can see, it's working. i only went blind in 1 eye ?? does that mean i can still burn CD's but not DVD' s? /me waits for the joke about excessive masturbation Link to comment Share on other sites More sharing options...
dontasciime Posted November 28, 2007 Share Posted November 28, 2007 I have decided not to post my joke about E M but my lass says she will beat it out of me later. Link to comment Share on other sites More sharing options...
spinningwheel Posted November 29, 2007 Share Posted November 29, 2007 I have decided not to post my joke about E M but my lass says she will beat it out of me later. Link to comment Share on other sites More sharing options...
lfcrule1972 Posted November 29, 2007 Share Posted November 29, 2007 I have decided not to post my joke about E M but my lass says she will beat it out of me later. Sounds like she will be taking you in hand then mate ! Btw what happened to the original poster ? Link to comment Share on other sites More sharing options...
spinningwheel Posted November 30, 2007 Share Posted November 30, 2007 Btw what happened to the original poster ? Maybe he became and left to then took a and went ... Link to comment Share on other sites More sharing options...
Recommended Posts