billku Posted December 9, 2007 Posted December 9, 2007 Hi -- Thanks in advance for anyone who can help me with my issues... Recently I haven't been able to back up any of my movies using Memorex DL media. Yes, I know it's not the best, but I burned a huge batch of backups successfully with it, but now I can't get any of my burns to work at all. I'm using an LG GSA H42N to read and a NEC ND 3530A to write, and I've updated the firmware for both drives. I'm planning on switching to better media (Verbatim), but I wanted to make sure beforehand that my hardware/drivers/settings aren't contributing to the problem as well. Can anyone gleam anything from this Imgburn log and let me know whether this is simply a media issue, or if I need to adjust somethings with my hardware as well? Again, thanks so much in advance! I 00:48:19 ImgBurn Version 2.3.2.0 started! I 00:48:19 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2) I 00:48:19 Total Physical Memory: 2,094,556 KB - Available: 1,534,776 KB I 00:48:19 Initialising SPTI... I 00:48:19 Searching for SCSI / ATAPI devices... I 00:48:19 Found 1 DVD±RW and 1 DVD±RW/RAM! I 00:49:15 Operation Started! I 00:49:15 Building Image Tree... I 00:49:19 Checking Directory Depth... I 00:49:19 Calculating Totals... I 00:49:19 Preparing Image... I 00:49:44 Using Layer Break LBA: 1178866 -> 1599632 (VTS_03, PGC: 1, Chapter: 1, Cell: 1, Vob/Cell ID: 1/1, Time: 00:00:00, SPLIP: No) I 00:49:44 Checking Path Length... I 00:49:44 Image Size: 6,552,092,672 bytes I 00:49:44 Image Sectors: 3,199,264 I 00:50:00 Operation Successfully Completed! - Duration: 00:00:45 I 00:50:00 Operation Started! I 00:50:00 Source File: -==/\/[bUILD IMAGE]\/\==- I 00:50:00 Source File Sectors: 3,199,264 (MODE1/2048) I 00:50:00 Source File Size: 6,552,092,672 bytes I 00:50:00 Source File Volume Identifier: BE80NNM1 I 00:50:00 Source File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER! I 00:50:00 Source File Implementation Identifier: ImgBurn I 00:50:00 Source File File System(s): ISO9660, UDF (1.02) I 00:50:00 Destination Device: [0:1:0] _NEC DVD+-RW ND-3530A 104C (I:) (ATA) I 00:50:00 Destination Media Type: DVD+R DL (Disc ID: RITEK-D01-01) (Speeds: 2.4x) I 00:50:00 Destination Media Sectors: 4,173,824 I 00:50:00 Write Mode: DVD I 00:50:00 Write Type: DAO I 00:50:00 Write Speed: 2.4x I 00:50:00 Link Size: Auto I 00:50:00 Test Mode: No I 00:50:00 BURN-Proof: Enabled I 00:50:00 Optimal L0 Data Zone Capacity: 1,599,632 I 00:50:00 Optimal L0 Data Zone Method: IFO Cell Boundary, 'SPLIP' Flag Not Set I 00:53:28 Filling Buffer... (40 MB) I 00:53:29 Writing LeadIn... I 00:55:34 Writing Image... (LBA: 0 - 3199263) I 00:55:34 Writing Layer 0... (LBA: 0 - 2086911) W 00:56:41 Failed to Write Sectors 12160 - 12191 - No Seek Complete W 00:56:41 Retrying (1 of 20)... W 00:56:41 Retry Failed - Write Error W 00:56:41 Retrying (2 of 20)... W 00:56:41 Retry Failed - Write Error W 00:56:41 Retrying (3 of 20)... W 00:56:41 Retry Failed - Write Error W 00:56:41 Retrying (4 of 20)... W 00:56:41 Retry Failed - Write Error W 00:56:41 Retrying (5 of 20)... W 00:56:41 Retry Failed - Write Error W 00:56:41 Retrying (6 of 20)... W 00:56:41 Retry Failed - Write Error W 00:56:41 Retrying (7 of 20)... W 00:56:41 Retry Failed - Write Error W 00:56:41 Retrying (8 of 20)... W 00:56:41 Retry Failed - Write Error W 00:56:41 Retrying (9 of 20)... W 00:56:41 Retry Failed - Write Error W 00:56:41 Retrying (10 of 20)... W 00:56:41 Retry Failed - Write Error W 00:56:41 Retrying (11 of 20)... W 00:56:41 Retry Failed - Write Error W 00:56:41 Retrying (12 of 20)... W 00:56:41 Retry Failed - Write Error W 00:56:41 Retrying (13 of 20)... W 00:56:41 Retry Failed - Write Error W 00:56:41 Retrying (14 of 20)... W 00:56:41 Retry Failed - Write Error W 00:56:41 Retrying (15 of 20)... W 00:56:41 Retry Failed - Write Error W 00:56:41 Retrying (16 of 20)... W 00:56:41 Retry Failed - Write Error W 00:56:41 Retrying (17 of 20)... W 00:56:41 Retry Failed - Write Error W 00:56:41 Retrying (18 of 20)... W 00:56:41 Retry Failed - Write Error W 00:56:41 Retrying (19 of 20)... W 00:56:41 Retry Failed - Write Error W 00:56:41 Retrying (20 of 20)... W 00:56:41 Retry Failed - Write Error W 00:57:19 Retrying (21)... W 00:57:19 Retry Failed - Write Error E 00:57:21 Failed to Write Sectors 12160 - 12191 - No Seek Complete I 00:57:21 Synchronising Cache... I 00:57:22 Closing Track... E 00:57:28 Close Track Failed! - Reason: Write Error I 00:57:28 Closing Track (Last Attempt!)... E 00:57:28 Close Track Failed! - Reason: Write Error I 00:57:28 Finalising Disc... E 00:57:33 Finalise Disc Failed! - Reason: Session Fixation Error - Incomplete Track in Session I 00:57:33 Finalising Disc (Last Attempt!)... E 00:57:33 Finalise Disc Failed! - Reason: Session Fixation Error - Incomplete Track in Session E 00:57:33 Failed to Write Image! E 00:57:33 Operation Failed! - Duration: 00:07:32 I 00:57:33 Average Write Rate: 227 KB/s (0.2x) - Maximum Write Rate: 1,889 KB/s (1.4x)
chewy Posted December 9, 2007 Posted December 9, 2007 why are you using that old dell oem nec to burn dual layer with? when you have a new LG?
billku Posted December 9, 2007 Author Posted December 9, 2007 (edited) why are you using that old dell oem nec to burn dual layer with? when you have a new LG? I get the same errors with the LG. Also, for some reason I can't figure out, the LG is very slow. On primary IDE channel properties, "DMA if available" is enabled under transfer mode for devices 0 & 1. Under "Current transfer mode,"PIO mode" is the only thing that's available (no ultra DMA). I have "DMA if available" enabled on secondary IDE Channel properties. "Ultra DMA" is not listed in "Current transfer mode." I can't figure out if there's a problem with it. Also, does anyone have any thoughts on the log? Edited December 9, 2007 by billku
volvofl10 Posted December 9, 2007 Posted December 9, 2007 yup , its the media , change to verbatims made in singapore and all will be good
blutach Posted December 9, 2007 Posted December 9, 2007 And delete the secondary chaneel and reboot to fix your DMA. See link in my signature. Regards
billku Posted December 10, 2007 Author Posted December 10, 2007 And delete the secondary chaneel and reboot to fix your DMA. See link in my signature. Regards Blutach -- that was great, ultra dma is now enabled on the primary channel. The secondary channel was reinstalled. Do you think this might help the burn issues I've been having? As I said, I used to be able to burn my back-ups, even using the memorex media, with very little issue.
chewy Posted December 10, 2007 Posted December 10, 2007 In pio mode the cpu is trying to handle the whole work load for the burn, the southbridge chipset does no work Pio mode should still work theoretically but most people's computers are so messed up the cpu can't handle it all
billku Posted December 10, 2007 Author Posted December 10, 2007 In pio mode the cpu is trying to handle the whole work load for the burn, the southbridge chipset does no work Pio mode should still work theoretically but most people's computers are so messed up the cpu can't handle it all So now that I've reestablished DMA mode, do you think I may have better burning success?
chewy Posted December 10, 2007 Posted December 10, 2007 RITEK-D01-01 and burning success don't make a very good couple
billku Posted December 10, 2007 Author Posted December 10, 2007 RITEK-D01-01 and burning success don't make a very good couple Yes, I realize that's the norm, but I have had success with them, then it mysteriously went away. My question is, would re-enabling Ultra DMA and losing PIO potentially take me back to where I was having success?
chewy Posted December 10, 2007 Posted December 10, 2007 It takes something extraordinary going wrong for a drive to go into pio mode, especially with sp2 not a good sign
billku Posted December 10, 2007 Author Posted December 10, 2007 It takes something extraordinary going wrong for a drive to go into pio mode, especially with sp2 not a good sign FYI, since fixing the Ultra DMA, I've been burning on the memorex discs with no problem.
spinningwheel Posted December 10, 2007 Posted December 10, 2007 It takes something extraordinary going wrong for a drive to go into pio mode, especially with sp2 not a good sign FYI, since fixing the Ultra DMA, I've been burning on the memorex discs with no problem. You'll need to recheck your media in about 6-8 months, odds are you will have corrupted files and a mess on the disc...just a little heads-up about media that normally sux...
billku Posted December 10, 2007 Author Posted December 10, 2007 It takes something extraordinary going wrong for a drive to go into pio mode, especially with sp2 not a good sign FYI, since fixing the Ultra DMA, I've been burning on the memorex discs with no problem. You'll need to recheck your media in about 6-8 months, odds are you will have corrupted files and a mess on the disc...just a little heads-up about media that normally sux... Done that. Haven't encountered those issues as of yet.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now