Burning Error Help

Kevin578 · December 20, 2007

I wanted to burn an ISO from an image to a disk. In the process, there was an error, I think it was "power calibration". I tried again on Nero, but still got the same error. How can I fix this? Here is a saved log from Nero

Kevin

Windows XP 5.1

IA32

WinAspi: -

NT-SPTI used

Nero Version: 8.2.8.0

Internal Version: 8, 2, 8, 0

Recorder: <SONY DVD RW DW-U14A> Version: 2.0c - HA 1 TA 0 - 8.2.8.0

Adapter driver: <IDE> HA 1

Drive buffer : 8192kB

Bus Type : default

CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 1 - 8.2.8.0

Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===

DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On

CdRomPeripheral : SONY DVD RW DW-U14A atapi Port 1 ID 0 DMA: On

CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 1 ID 1 DMA: On

CdRomPeripheral : UH3237R OHF407P 1.0 an1fix8a Port 2 ID 0 DMA: Off

CdRomPeripheral : FvFx FVXSCSI Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===

SONY DVD RW DW-U14A D: CdRom0

HL-DT-ST DVD-ROM GDR8162B E: CdRom1

UH3237R OHF407P F: CdRom2

FvFx CDDVDvx+tech-200 G: CdRom3

=======================

AutoRun : 1

Excluded drive IDs:

WriteBufferSize: 83886080 (0) Byte

BUFE : 0

Physical memory : 1535MB (1572204kB)

Free physical memory: 1027MB (1052172kB)

Memory in use : 33 %

Uncached PFiles: 0x0

Use Inquiry : 1

Global Bus Type: default (0)

Check supported media : Disabled (0)

19.12.2007

Burn DVD Image

10:04:33 PM #1 Text 0 File SCSIPTICommands.cpp, Line 450

LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

10:04:33 PM #2 Text 0 File Burncd.cpp, Line 3502

Turn on Disc-At-Once, using DVD media

10:04:34 PM #3 Text 0 File DlgWaitCD.cpp, Line 307

Last possible write address on media: 2298495 (510:46.45, 4489MB)

Last address to be written: 1601695 (355:55.70, 3128MB)

10:04:34 PM #4 Text 0 File DlgWaitCD.cpp, Line 319

Write in overburning mode: NO (enabled: CD)

10:04:34 PM #5 Text 0 File DlgWaitCD.cpp, Line 2957

Recorder: SONY DVD RW DW-U14A, Media type: DVD-R

Disc Manufacturer ID: <MCC 03> <RG20 >

Disc Application Code: 64, Disc Physical Code: 193

10:04:34 PM #6 Text 0 File DlgWaitCD.cpp, Line 493

>>> Protocol of DlgWaitCD activities: <<<

=========================================

10:04:34 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 762

Setup items (after recorder preparation)

0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)

2 indices, index0 (150) not provided

original disc pos #0 + 1601696 (1601696) = #1601696/355:55.71

not relocatable, disc pos for caching/writing not required/not required

-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1601696 blocks [D: SONY DVD RW DW-U14A]

--------------------------------------------------------------

10:04:34 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 964

Prepare [D: SONY DVD RW DW-U14A] for write in CUE-sheet-DAO

DAO infos:

==========

MCN: ""

TOCType: 0x00; Session Closed, disc fixated

Tracks 1 to 1: Idx 0 Idx 1 Next Trk

1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3280273408, ISRC ""

DAO layout:

===========

0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00

0 | 1 | 0 | 0x41 | 0 | 0 | 0x00

0 | 1 | 1 | 0x41 | 1601696 | 1601696 | 0x00

1601696 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

10:04:34 PM #9 Text 0 File SCSIPTICommands.cpp, Line 240

SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

10:04:34 PM #10 Text 0 File Burncd.cpp, Line 4288

Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

10:04:34 PM #11 Phase 24 File dlgbrnst.cpp, Line 1767

Caching of files started

10:04:34 PM #12 Text 0 File Burncd.cpp, Line 4407

Cache writing successful.

10:04:34 PM #13 Phase 25 File dlgbrnst.cpp, Line 1767

Caching of files completed

10:04:34 PM #14 Phase 28 File dlgbrnst.cpp, Line 1767

Speed measurement started

10:04:34 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2681

Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

10:04:34 PM #16 Text 0 File ThreadedTransfer.cpp, Line 269

Pipe memory size 590400

10:08:04 PM #17 Text 0 File WriterStatus.cpp, Line 240

<D: SONY DVD RW DW-U14A> start writing Lead-Out at LBA 1601696 (1870A0h), length 0 blocks

10:08:04 PM #18 Phase 29 File dlgbrnst.cpp, Line 1716

Speed measurement completed: 11x (15,250 KB/s)

10:08:04 PM #19 Phase 36 File dlgbrnst.cpp, Line 1767

Burn process started at 4x (5,540 KB/s)

10:08:05 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2681

Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

10:08:05 PM #21 Text 0 File DVDR.cpp, Line 3273

Recording mode: Sequential Recording Mode

10:08:05 PM #22 Text 0 File DVDR.cpp, Line 3427

Start write address at LBA 0

DVD high compatibility mode: Yes

10:08:05 PM #23 SPTI -1066 File SCSIPassThrough.cpp, Line 197

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)

CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00

Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)

Sense Code: 0x24

Sense Qual: 0x00

Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 CC 00 01

Buffer x07bd0200: Len x648

10:08:05 PM #24 Text 0 File Cdrdrv.cpp, Line 10140

---- Disc Structure: Physical Format Information (00h) ----

Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050

Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)

Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)

Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable

Linear Density: 0,267 um/bit, Track Density: 0,74 um/track

Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)

Outer Limit of Data Recordable Area: 0 h

Data in Burst Cutting Area (BCA) does not exist

Revision number of maximum recording speed: -

Revision number of minimum recording speed: -

Revision number table of recording speed: - - - - - - -

Class: 0, Extended part version: 0

Start PSN of the Extra Border Zone: 0 h

Start PSN of Physical format information blocks in Extra Border Zone: 0 h

Media Specific [16..783]:

00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

10:08:05 PM #25 Text 0 File DVDR.cpp, Line 3565

Reserved Track size: 1601696 (1870A0h, 3128MB) -> return code 0

10:08:05 PM #26 Text 0 File ThreadedTransfer.cpp, Line 269

Pipe memory size 83836800

10:08:11 PM #27 Text 0 File Cdrdrv.cpp, Line 1402

22:08:11.984 - D: SONY DVD RW DW-U14A : Queue again later

10:08:56 PM #28 SPTI -1106 File SCSIPassThrough.cpp, Line 197

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)

CDB Data: 0x2A 00 00 00 08 C0 00 00 20 00 00 00

Sense Key: 0x03 (KEY_MEDIUM_ERROR)

Sense Code: 0x73

Sense Qual: 0x03

Sense Area: 0xF1 00 03 FF FD 00 00 12 00 00 00 00 73 03

Buffer x097111c0: Len x10000

0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

10:08:56 PM #29 CDR -1106 File Writer.cpp, Line 306

Power calibration error

D: SONY DVD RW DW-U14A

10:08:57 PM #30 Text 0 File DVDR.cpp, Line 3833

EndDAO: Last written address was 2239 (8BFh)

10:08:57 PM #31 Phase 38 File dlgbrnst.cpp, Line 1767

Burn process failed at 4x (5,540 KB/s)

10:08:57 PM #32 Text 0 File SCSIPTICommands.cpp, Line 287

SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

10:09:00 PM #33 Text 0 File Cdrdrv.cpp, Line 11391

DriveLocker: UnLockVolume completed

10:09:01 PM #34 Text 0 File SCSIPTICommands.cpp, Line 450

UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:

HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

**chewy** · December 20, 2007

http://forum.rpc1.org/dl_firmware.php?download_id=1618

awfully old drive for a computer with so much ram

imgburn log is a lot easier to find than the nero one????

the newest firmware might see and burn those 16x better??????

**spinningwheel** · December 20, 2007

AND.... since this is the ImgBurn forum and not the NERO forum..... how about posting the ImgBurn log when you need help here since not all of us clog up our machines with inferior programs..... <_<

**dontasciime** · December 20, 2007

Spinningwheel can you help me with my logs they just won't burn.

I have poured petrol on them the petrol lights but the burn stops half way through.

I have contacted nero paid support but they just tell me to fiddle.

btw were there really 577 b4 you Kevin

**spinningwheel** · December 20, 2007

Donta... =)) =)) =)) :thumbup:

Kevin578 · December 20, 2007

Ok, here is the imgburn log. Both programs show power calibration error. Do you think it's my burner? Should I try it on another computer? Can I still use the same DVD? I think the program was at 17% burning. When I insert it to my computer, it still shows blank cd. If I did a simulation burn, could I use the dvd again in case of an error?

;//****************************************\\

; ImgBurn Version 2.3.2.0 - Log

; Wednesday, 19 December 2007, 21:01:31

; \\****************************************//

;

I 20:41:01 ImgBurn Version 2.3.2.0 started!

I 20:41:01 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)

I 20:41:01 Total Physical Memory: 1,572,204 KB - Available: 949,000 KB

I 20:41:01 Initialising SPTI...

I 20:41:01 Searching for SCSI / ATAPI devices...

I 20:41:01 Found 3 DVD-ROMs and 1 DVD±RW!

I 20:46:27 Operation Started!

I 20:46:27 Source File: C:\Documents and Settings\Kevin\My Documents\ISO IMAGE.iso

I 20:46:27 Source File Sectors: 1,601,696 (MODE1/2048)

I 20:46:27 Source File Size: 3,280,273,408 bytes

I 20:46:27 Source File Implementation Identifier: DVD-ROM GENERATOR

I 20:46:27 Source File File System(s): ISO9660, UDF (1.02)

I 20:46:27 Destination Device: [1:0:0] SONY DVD RW DW-U14A 2.0c (D:) (ATA)

I 20:46:27 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) (Speeds: 1x, 2x, 4x)

I 20:46:27 Destination Media Sectors: 2,297,888

I 20:46:27 Write Mode: DVD

I 20:46:27 Write Type: DAO

I 20:46:27 Write Speed: 8x

I 20:46:27 Link Size: Auto

I 20:46:27 Test Mode: No

I 20:46:27 BURN-Proof: Enabled

I 20:46:28 Filling Buffer... (40 MB)

I 20:46:34 Writing LeadIn...

W 20:47:19 Failed to Write Sectors 2240 - 2271 - Power Calibration Area Error

W 20:47:19 Retrying (1 of 20)...