shabik Posted January 14, 2008 Posted January 14, 2008 Just bought an xbox360 and flashed it and now I wanted to install assassins creed. Read that you should use imgburn and set the layerthing to 1913760 and so I did. Downloaded the latest version and couldnt really find where to change book so I assume it was automatic. Anyways, when I burned it and put it into the xbox360 nothing happened. I did the data verification and sector 1913760-1913775 and 359120-71 etc all seem to have problems too. I am attaching a screenshot with the errors. Would really like to get some help with this because I have tried 2 discs and nothing seem to work. The only thing that I can think of for the last disc was that I set the burn speed at max. I use verbatim 2.4x DVD+R DL and it burned at 4.1x. Can this be the problem?
LIGHTNING UK! Posted January 14, 2008 Posted January 14, 2008 Try setting the write speed to 2.4x instead of leaving it on Auto/Max. (You need to configure the program for 'Auto' - read the Guides forum) At the moment your drive is just producing bad burns. Check for firmware updates too. Oh and you don't need to (and shouldn't) set the layer break position manually, that info is read from the .DVD file.
shabik Posted January 14, 2008 Author Posted January 14, 2008 Try setting the write speed to 2.4x instead of leaving it on Auto/Max. (You need to configure the program for 'Auto' - read the Guides forum) At the moment your drive is just producing bad burns. Check for firmware updates too. Oh and you don't need to (and shouldn't) set the layer break position manually, that info is read from the .DVD file. Thanks for the answer, so you think that the whole thing was about the burnspeed? That I should try again without it and it will probably work? What is firmware updates :S? I just flashed my xbox360 a few days ago, hope that it is current. I read on the torrent-file that I should set it at that break layer for that game, maybe it was in the DVD-file thou :S.
LIGHTNING UK! Posted January 14, 2008 Posted January 14, 2008 Yes you should try again having forced the burnspeed to 2.4x or leave it on 'Auto' having created an entry for that media/drive so it knows to use 2.4x (once again, read the Automatic Write Speed guide!) Firmware updates for your burner I mean.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now