buzuki1 Posted January 26, 2008 Share Posted January 26, 2008 I would really appreciate any help on the following : I use Imgburn to backup my Wii games - up until last week ( due to my stupid mistake and the failure to properly set up my DMA ) i was only able to write with 0.7x speed - th ebackups took ages to burn but they worked like a charm on my Wii - ever since i fixed my DMA i keep having problems - it seems that i am not able to burn with speeds lower than 6X and this ( probably ) causes the burns to not be good ( i apologise if i am being not too technical - or if i am talking liek a total newbie ) This is what Imgburn says PLEXTOR DVDR PX-760A 1.04 (ATA) Current Profile: DVD-R Disc Information: Status: Empty Erasable: No Free Sectors: 2.297.888 Free Space: 4.706.074.624 bytes Free Time: 510:40:38 (MM:SS:FF) Supported Write Speeds: 6x; 8x; 12x; 16x; 18x I would really like to be able to burn at lower speeds ( and i tried many differenet media - Verbatim / samsung / maxwell / tdk ) - the games sometimes they work - sometimes they don't - sometimes i get an error and i have to eject th egame and re-load it Does anyone ofyou have any idea how i will be able to burn at a slower speed? Appreciate any help Thanks in advance Christos Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 26, 2008 Share Posted January 26, 2008 Drives only write to certain media at certain speeds. I very much doubt any new drive would still support 1x burning - except maybe on the very early 2x or 4x discs. Update your drive to the 1.07 firmware btw, you're a bit behind there. Link to comment Share on other sites More sharing options...
Recommended Posts