Jump to content

Recommended Posts

Posted

Yeah Well when i go to burn my xbox 360 backups on a dvd+R dl disc it just pop up a bunch of errors in the log section and I dont know what it means... anybody can help? (ill put the log below)

 

I 08:55:26 ImgBurn Version 2.3.2.0 started!

I 08:55:26 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)

I 08:55:26 Total Physical Memory: 1,039,660 KB - Available: 610,280 KB

W 08:55:26 Drive D:\ (FAT32) does not support single files > 4 GB in size.

I 08:55:26 Initialising SPTI...

I 08:55:26 Searching for SCSI / ATAPI devices...

I 08:55:26 Found 1 DVD-ROM and 1 DVD±RW!

I 08:55:53 Operation Started!

I 08:55:53 Source File: C:\Documents and Settings\HP_Owner\Desktop\Ace Combat\strange-ac6.dvd

I 08:55:53 Source File Sectors: 3,825,924 (MODE1/2048)

I 08:55:53 Source File Size: 7,835,492,352 bytes

I 08:55:53 Source File Volume Identifier: XGD2DVD_NTSC

I 08:55:53 Source File Implementation Identifier: Sonic Scenarist 3.1

I 08:55:53 Source File File System(s): ISO9660, UDF (1.02)

I 08:55:53 Destination Device: [0:0:0] HP DVD Writer 640c CS30 (E:) (ATA)

I 08:55:53 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x)

I 08:55:53 Destination Media Sectors: 4,173,824

I 08:55:53 Write Mode: DVD

I 08:55:53 Write Type: DAO

I 08:55:53 Write Speed: MAX

I 08:55:53 Link Size: Auto

I 08:55:53 Test Mode: No

I 08:55:53 BURN-Proof: Enabled

I 08:55:53 Optimal L0 Data Zone Capacity: 1,913,760

I 08:55:53 Optimal L0 Data Zone Method: Copied From Original Disc

I 08:55:54 Filling Buffer... (40 MB)

I 08:55:54 Writing LeadIn...

W 08:56:00 Failed to Write Sectors 0 - 31 - Power Calibration Area Is Full

W 08:56:00 Retrying (1 of 20)...

W 08:56:00 Retry Failed - Power Calibration Area Is Full

W 08:56:00 Retrying (2 of 20)...

W 08:56:00 Retry Failed - Power Calibration Area Is Full

W 08:56:00 Retrying (3 of 20)...

W 08:56:00 Retry Failed - Power Calibration Area Is Full

W 08:56:00 Retrying (4 of 20)...

W 08:56:00 Retry Failed - Power Calibration Area Is Full

W 08:56:00 Retrying (5 of 20)...

W 08:56:01 Retry Failed - Power Calibration Area Is Full

W 08:56:01 Retrying (6 of 20)...

W 08:56:01 Retry Failed - Power Calibration Area Is Full

W 08:56:01 Retrying (7 of 20)...

W 08:56:01 Retry Failed - Power Calibration Area Is Full

W 08:56:01 Retrying (8 of 20)...

W 08:56:01 Retry Failed - Power Calibration Area Is Full

W 08:56:01 Retrying (9 of 20)...

W 08:56:01 Retry Failed - Power Calibration Area Is Full

W 08:56:01 Retrying (10 of 20)...

W 08:56:02 Retry Failed - Power Calibration Area Is Full

W 08:56:02 Retrying (11 of 20)...

W 08:56:02 Retry Failed - Power Calibration Area Is Full

W 08:56:02 Retrying (12 of 20)...

W 08:56:02 Retry Failed - Power Calibration Area Is Full

W 08:56:02 Retrying (13 of 20)...

W 08:56:02 Retry Failed - Power Calibration Area Is Full

W 08:56:02 Retrying (14 of 20)...

W 08:56:02 Retry Failed - Power Calibration Area Is Full

W 08:56:02 Retrying (15 of 20)...

W 08:56:03 Retry Failed - Power Calibration Area Is Full

W 08:56:03 Retrying (16 of 20)...

W 08:56:03 Retry Failed - Power Calibration Area Is Full

W 08:56:03 Retrying (17 of 20)...

W 08:56:03 Retry Failed - Power Calibration Area Is Full

W 08:56:03 Retrying (18 of 20)...

W 08:56:03 Retry Failed - Power Calibration Area Is Full

W 08:56:03 Retrying (19 of 20)...

W 08:56:03 Retry Failed - Power Calibration Area Is Full

W 08:56:03 Retrying (20 of 20)...

W 08:56:04 Retry Failed - Power Calibration Area Is Full

E 08:56:05 Failed to Write Sectors 0 - 31 - Power Calibration Area Is Full

I 08:56:05 Synchronising Cache...

I 08:56:06 Closing Track...

I 08:56:08 Finalising Disc...

E 08:56:11 Finalise Disc Failed! - Reason: Invalid Field in CDB

I 08:56:11 Finalising Disc (Last Attempt!)...

E 08:56:11 Finalise Disc Failed! - Reason: Invalid Field in CDB

E 08:56:11 Failed to Write Image!

E 08:56:11 Operation Failed! - Duration: 00:00:17

I 08:56:11 Average Write Rate: N/A - Maximum Write Rate: N/A

Posted
I 08:55:53 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x)

Use Verbatim DVD+R DLs 2.4x Made in Singapore and you won't have problems again. Look in HP's website for a newer firmware for your burner :thumbup:

Posted
I 08:55:53 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x)

Use Verbatim DVD+R DLs 2.4x Made in Singapore and you won't have problems again. Look in HP's website for a newer firmware for your burner :thumbup:

 

k. kinda weird though bought some of these discs before and they worked fine. ill try to look for firmware update might help :) um yeah and like i bought these discs kuz the son of a b**chs at the store put the price up by 30$ (i used to use fujifilm which worked fine)

Posted

RITEK-S04-66 is actually quite a new dye so whilst you might have got the same 'brand' as before, it's the dye that's important and I guess they changed which one their discs use.

Posted

You want to stick with 2.4x disc on that drive, I believe that's all it can handle anyway so anything 8x is too new for it (unless it has a very recent firmware?)

 

So far a DL discs go, you want DVD+R DL and NOT DVD-R DL.

 

For SL discs get whatever you want. I personally like the 8x Taiyo Yuden ones with the TYG02 dye. Verbatim either use the MCC dye or the TY one - both are excellent although I prefer the TY one for their DVD-R discs.

 

So the dyes you're looking for are:

 

TYG02 - 8x DVD-R

TYG03 - 16x DVD-R

YUDEN000-T02-00 - 8x DVD+R

YUDEN000-T03-00 - 16x DVD+R

 

MCC 02RG20 - 8x DVD-R

MCC 03RG20 - 16x DVD-R

MCC-003-00 - 8x DVD+R

MCC-004-00 - 16x DVD+R

 

MKM-001-00 - 2.4x DVD+R DL

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.