ataylor Posted February 1, 2008 Posted February 1, 2008 (edited) OK, after the advice given in the last thread, I bought some Verbatim's 16x DVD-Rs, and tried them out. I keep on getting write errors at different stages of the burn (3%, 80% etc). I have tried 3 Verbatim discs and 1 TDK. I have tried two different images, same error. I tried another type of media (TDK), same error. Firmware is up to date (I think.. Dell's site isn't amazingly accessible). Drive details + log below. btw: DeepBurner worked fine before with the TDK media. Only been having this problem with ImgBurn. DeepBurner only ever reached 2x though, and even though the burns completed, there were obviously some issues with them (a fair few of the files on the discs were corrupted) Drive: SONY DVD+-RW DW-Q58A UDS2 (ATA) The computer is a laptop: Dell Inspiron 1300. A log of one of the failed writes (to Verbatim media): I 22:14:53 Operation Started! I 22:14:53 Source File: C:\Documents and Settings\missy\My Documents\music1.iso I 22:14:53 Source File Sectors: 2,285,408 (MODE1/2048) I 22:14:53 Source File Size: 4,680,515,584 bytes I 22:14:53 Source File Volume Identifier: music I 22:14:53 Source File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER! I 22:14:53 Source File Implementation Identifier: ImgBurn I 22:14:53 Source File File System(s): ISO9660, UDF (1.02) I 22:14:53 Destination Device: [0:1:0] SONY DVD+-RW DW-Q58A UDS2 (E:) (ATA) I 22:14:53 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) (Speeds: 2x, 4x, 6x, 8x) I 22:14:53 Destination Media Sectors: 2,297,888 I 22:14:53 Write Mode: DVD I 22:14:53 Write Type: DAO I 22:14:53 Write Speed: MAX I 22:14:53 Link Size: Auto I 22:14:53 Test Mode: No I 22:14:53 BURN-Proof: Enabled I 22:14:53 Filling Buffer... (40 MB) I 22:14:54 Writing LeadIn... I 22:16:22 Writing Image... (LBA: 0 - 2285407) W 22:22:24 Failed to Write Sectors 788384 - 788415 - Command Sequence Error W 22:22:24 Retrying (1 of 20)... W 22:22:24 Retry Failed - Command Sequence Error W 22:22:24 Retrying (2 of 20)... W 22:22:25 Retry Failed - Command Sequence Error W 22:22:25 Retrying (3 of 20)... W 22:22:25 Retry Failed - Command Sequence Error W 22:22:25 Retrying (4 of 20)... W 22:22:25 Retry Failed - Command Sequence Error W 22:22:25 Retrying (5 of 20)... W 22:22:25 Retry Failed - Command Sequence Error W 22:22:25 Retrying (6 of 20)... W 22:22:25 Retry Failed - Command Sequence Error W 22:22:25 Retrying (7 of 20)... W 22:22:26 Retry Failed - Command Sequence Error W 22:22:26 Retrying (8 of 20)... W 22:22:26 Retry Failed - Command Sequence Error W 22:22:26 Retrying (9 of 20)... W 22:22:26 Retry Failed - Command Sequence Error W 22:22:26 Retrying (10 of 20)... W 22:22:26 Retry Failed - Command Sequence Error W 22:22:26 Retrying (11 of 20)... W 22:22:26 Retry Failed - Command Sequence Error W 22:22:26 Retrying (12 of 20)... W 22:22:27 Retry Failed - Command Sequence Error W 22:22:27 Retrying (13 of 20)... W 22:22:27 Retry Failed - Command Sequence Error W 22:22:27 Retrying (14 of 20)... W 22:22:27 Retry Failed - Command Sequence Error W 22:22:27 Retrying (15 of 20)... W 22:22:27 Retry Failed - Command Sequence Error W 22:22:27 Retrying (16 of 20)... W 22:22:27 Retry Failed - Command Sequence Error W 22:22:27 Retrying (17 of 20)... W 22:22:28 Retry Failed - Command Sequence Error W 22:22:28 Retrying (18 of 20)... W 22:22:28 Retry Failed - Command Sequence Error W 22:22:28 Retrying (19 of 20)... W 22:22:28 Retry Failed - Command Sequence Error W 22:22:28 Retrying (20 of 20)... W 22:22:28 Retry Failed - Command Sequence Error W 22:24:13 Retrying (21)... W 22:24:13 Retry Failed - Command Sequence Error E 22:24:23 Failed to Write Sectors 788384 - 788415 - Command Sequence Error I 22:24:23 Synchronising Cache... E 22:24:24 Failed to Write Image! E 22:24:24 Operation Failed! - Duration: 00:09:31 I 22:24:24 Average Write Rate: 3,278 KB/s (2.4x) - Maximum Write Rate: 5,511 KB/s (4.0x) And the popup error message I get: --------------------------- ImgBurn --------------------------- I/O Error! Device: [0:1:0] SONY DVD+-RW DW-Q58A UDS2 (E:) (ATA) ScsiStatus: 0x02 Interpretation: Check Condition CDB: 2A 00 00 0C 07 A0 00 00 20 00 Interpretation: Write (10) - Sectors: 788384 - 788415 Sense Area: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 00 00 00 00 00 Interpretation: Command Sequence Error --------------------------- Retry Cancel --------------------------- Edited February 1, 2008 by ataylor
LIGHTNING UK! Posted February 1, 2008 Posted February 1, 2008 Try switching the 'Write Type' in the settings (on the Write tab) to Incremental. 'Command Sequence Error' is totally bogus IMO. The 'sequence' was ok for the previous 788384 sectors, why's it suddenly wrong now?! lol Silly drive!
ataylor Posted February 1, 2008 Author Posted February 1, 2008 (edited) Thanks for the suggestion Unfortunately only creates a different problem. Log: I 22:37:43 ImgBurn Version 2.3.2.0 started! I 22:37:43 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 22:37:43 Total Physical Memory: 1,039,740 KB - Available: 613,528 KB I 22:37:43 Initialising SPTI... I 22:37:43 Searching for SCSI / ATAPI devices... I 22:37:44 Found 1 DVD±RW! I 22:38:07 Operation Started! I 22:38:07 Source File: C:\Documents and Settings\missy\My Documents\music.iso I 22:38:07 Source File Sectors: 2,045,152 (MODE1/2048) I 22:38:07 Source File Size: 4,188,471,296 bytes I 22:38:07 Source File Volume Identifier: music I 22:38:07 Source File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER! I 22:38:07 Source File Implementation Identifier: ImgBurn I 22:38:07 Source File File System(s): ISO9660, UDF (1.02) I 22:38:07 Destination Device: [0:1:0] SONY DVD+-RW DW-Q58A UDS2 (E:) (ATA) I 22:38:07 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) (Speeds: 2x, 4x, 6x, 8x) I 22:38:07 Destination Media Sectors: 2,297,888 I 22:38:07 Write Mode: DVD I 22:38:07 Write Type: Incremental I 22:38:07 Write Speed: MAX I 22:38:07 Link Size: Auto I 22:38:07 Test Mode: No I 22:38:07 BURN-Proof: Enabled I 22:38:08 Filling Buffer... (40 MB) I 22:38:09 Writing LeadIn... W 22:38:09 Failed to Write Sectors 0 - 31 - Invalid Field in Parameter List W 22:38:09 Retrying (1 of 20)... W 22:38:09 Retry Failed - Invalid Field in Parameter List W 22:38:09 Retrying (2 of 20)... W 22:38:10 Retry Failed - Invalid Field in Parameter List W 22:38:10 Retrying (3 of 20)... W 22:38:10 Retry Failed - Invalid Field in Parameter List W 22:38:10 Retrying (4 of 20)... W 22:38:10 Retry Failed - Invalid Field in Parameter List W 22:38:10 Retrying (5 of 20)... W 22:38:10 Retry Failed - Invalid Field in Parameter List W 22:38:10 Retrying (6 of 20)... W 22:38:10 Retry Failed - Invalid Field in Parameter List W 22:38:10 Retrying (7 of 20)... W 22:38:11 Retry Failed - Invalid Field in Parameter List W 22:38:11 Retrying (8 of 20)... W 22:38:11 Retry Failed - Invalid Field in Parameter List W 22:38:11 Retrying (9 of 20)... W 22:38:11 Retry Failed - Invalid Field in Parameter List W 22:38:11 Retrying (10 of 20)... W 22:38:11 Retry Failed - Invalid Field in Parameter List W 22:38:11 Retrying (11 of 20)... W 22:38:11 Retry Failed - Invalid Field in Parameter List W 22:38:11 Retrying (12 of 20)... W 22:38:12 Retry Failed - Invalid Field in Parameter List W 22:38:12 Retrying (13 of 20)... W 22:38:12 Retry Failed - Invalid Field in Parameter List W 22:38:12 Retrying (14 of 20)... W 22:38:12 Retry Failed - Invalid Field in Parameter List W 22:38:12 Retrying (15 of 20)... W 22:38:12 Retry Failed - Invalid Field in Parameter List W 22:38:12 Retrying (16 of 20)... W 22:38:12 Retry Failed - Invalid Field in Parameter List W 22:38:12 Retrying (17 of 20)... W 22:38:12 Retry Failed - Invalid Field in Parameter List W 22:38:12 Retrying (18 of 20)... W 22:38:13 Retry Failed - Invalid Field in Parameter List W 22:38:13 Retrying (19 of 20)... W 22:38:13 Retry Failed - Invalid Field in Parameter List W 22:38:13 Retrying (20 of 20)... W 22:38:13 Retry Failed - Invalid Field in Parameter List W 22:38:19 Retrying (21)... W 22:38:19 Retry Failed - Invalid Field in Parameter List E 22:38:20 Failed to Write Sectors 0 - 31 - Invalid Field in Parameter List I 22:38:20 Synchronising Cache... I 22:38:22 Closing Track... Then it just hangs on closing track, and trying to cancel it results in "You told me that already" error lol. Edited February 1, 2008 by ataylor
LIGHTNING UK! Posted February 1, 2008 Posted February 1, 2008 It's probably burning the entire disc (with zeroes or something) at the 'close track' bit - as the track would have been reserved and it'll be wondering why nothing has been burnt to it. Get yourself an external drive.
ataylor Posted February 2, 2008 Author Posted February 2, 2008 (edited) So there is no way of solving this? The laptop is only a year old... The reason I mentioned DeepBurner above was because I thought the program itself was burning correctly, but the TDK media was what corrupted files. Edit: It gets stranger. Tried to burn the .iso to a Verbatim using DeepBurner and it completed the burn (at 2x though). Then I verified it through ImgBurn, and it came back succesful. Was able to load the disc and files on it fine on the Dell, but when trying to load it on an IBM ThinkPad with Linux installed, it just refused to read it. Edited February 2, 2008 by ataylor
ataylor Posted February 4, 2008 Author Posted February 4, 2008 Anyone? I will buy an external burner if I really have to, but I'd rather see if anyone has any suggestions about fixing this...
dontasciime Posted February 4, 2008 Posted February 4, 2008 Try a lens cleaner look for a firmware update, buy an new internal laptop drive (they are poor) or buy an external See manufacturer and tell them drive is fooked and you expected to be able to burn more than 20 disc's b4 it broke. Go back to shop you bought laptop from and complain about shoddy goods. Also look for some older 8x media and try with those , by that I mean some decent media.
Recommended Posts