Burned .img file won't play

mijobagi · February 1, 2008

Well, it won't play in my DVD player at least. It plays fine on the computer (although with no sound). I've berned these files before with no problem, any help would be appreciated.

**cornholio7** · February 1, 2008

post a log please

mijobagi · February 1, 2008

post a log please

Oops! Meant to do that....

I 13:24:01 ImgBurn Version 2.3.2.0 started!

I 13:24:01 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2)

I 13:24:01 Total Physical Memory: 2,095,196 KB - Available: 1,581,388 KB

I 13:24:01 Initialising SPTI...

I 13:24:01 Searching for SCSI / ATAPI devices...

I 13:24:02 Found 1 DVD-ROM and 1 DVD±RW!

I 13:58:31 Operation Started!

I 13:58:31 Source File: F:\My Downloads\Movies\Brotherhood.Of.The.Wolf.2001.DTS.NORDIC.PAL.DVDR-TiGER\tiger-brotherhood.of.the.wolf\tiger-brotherhood.of.the.wolf.img

I 13:58:31 Source File Sectors: 2,270,969 (MODE1/2048)

I 13:58:31 Source File Size: 4,650,944,512 bytes

I 13:58:31 Source File Volume Identifier: BROTHERHOOD_OF_THE_WOLF

I 13:58:31 Source File Implementation Identifier: mkisofs

I 13:58:31 Source File File System(s): ISO9660, UDF (1.02)

I 13:58:31 Destination Device: [1:1:0] PIONEER DVD-RW DVR-111D 1.19 (E:) (ATA)

I 13:58:31 Destination Media Type: DVD+R (Disc ID: PRODISC-R05-01) (Speeds: 4x, 6x, 8x, 12x)

I 13:58:31 Destination Media Sectors: 2,295,104

I 13:58:31 Write Mode: DVD

I 13:58:31 Write Type: DAO

I 13:58:31 Write Speed: MAX

I 13:58:31 Link Size: Auto

I 13:58:31 Test Mode: No

I 13:58:31 BURN-Proof: Enabled

I 13:58:31 Filling Buffer... (40 MB)

I 13:58:33 Writing LeadIn...

I 13:58:59 Writing Image... (LBA: 0 - 2270968)

I 14:53:23 Synchronising Cache...

I 14:53:24 Closing Track...

I 14:53:35 Finalising Disc...

I 14:54:03 Image MD5: 0bbf8625b911ca71bce7b43e282e6987

I 14:54:03 Operation Successfully Completed! - Duration: 00:55:31

I 14:54:03 Average Write Rate: 1,391 KB/s (1.0x) - Maximum Write Rate: 1,758 KB/s (1.3x)

**cornholio7** · February 1, 2008

update your firmware, check your dma and turn verify on.

then try some better discs (verbatim ot taiyo yuden) if you still have problems after all that then let us know

mijobagi · February 1, 2008

update your firmware, check your dma and turn verify on.
then try some better discs (verbatim ot taiyo yuden) if you still have problems after all that then let us know

I'm on it.... and pardon my ignorance but.... dma???

**cornholio7** · February 1, 2008

theres a link in orange in my sig

mijobagi · February 3, 2008

theres a link in orange in my sig

All right, updated firmware, checked dma and turned on verify, same result. I haven't gotten new discs yet but I've tried 4 times with no luck and have used these discs numerous times with no problems. I'll get some verbatims tomorrow but is there anything eles I can try in the meantime... log is below...

I 10:24:45 ImgBurn Version 2.3.2.0 started!

I 10:24:45 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2)

I 10:24:45 Total Physical Memory: 2,095,196 KB - Available: 1,424,116 KB

I 10:24:45 Initialising SPTI...

I 10:24:45 Searching for SCSI / ATAPI devices...

I 10:24:45 Found 1 DVD-ROM and 1 DVD±RW!

I 10:28:54 Operation Started!

I 10:28:54 Source File: F:\My Downloads\Movies\Brotherhood.Of.The.Wolf.2001.DTS.NORDIC.PAL.DVDR-TiGER\tiger-brotherhood.of.the.wolf\tiger-brotherhood.of.the.wolf.img

I 10:28:54 Source File Sectors: 2,270,969 (MODE1/2048)

I 10:28:54 Source File Size: 4,650,944,512 bytes

I 10:28:54 Source File Volume Identifier: BROTHERHOOD_OF_THE_WOLF

I 10:28:54 Source File Implementation Identifier: mkisofs

I 10:28:54 Source File File System(s): ISO9660, UDF (1.02)

I 10:28:54 Destination Device: [1:1:0] PIONEER DVD-RW DVR-111D 1.29 (E:) (ATA)

I 10:28:54 Destination Media Type: DVD+R (Disc ID: PRODISC-R05-01) (Speeds: 4x, 6x, 8x, 12x, 16x)

I 10:28:54 Destination Media Sectors: 2,295,104

I 10:28:54 Write Mode: DVD

I 10:28:54 Write Type: DAO

I 10:28:54 Write Speed: MAX

I 10:28:54 Link Size: Auto

I 10:28:54 Test Mode: No

I 10:28:54 BURN-Proof: Enabled

I 10:28:55 Filling Buffer... (40 MB)

I 10:28:56 Writing LeadIn...

I 10:29:28 Writing Image... (LBA: 0 - 2270968)

I 11:19:53 Synchronising Cache...

I 11:19:54 Closing Track...

I 11:19:55 Finalising Disc...

I 11:20:23 Image MD5: 0bbf8625b911ca71bce7b43e282e6987

I 11:20:23 Operation Successfully Completed! - Duration: 00:51:29

I 11:20:23 Average Write Rate: 1,501 KB/s (1.1x) - Maximum Write Rate: 1,685 KB/s (1.2x)

I 11:20:23 Cycling Tray before Verify...

I 11:20:42 Device Ready!

I 11:20:42 Operation Started!

I 11:20:42 Source Device: [1:1:0] PIONEER DVD-RW DVR-111D 1.29 (E:) (ATA)

I 11:20:42 Source Media Type: DVD+R (Book Type: DVD+R) (Disc ID: PRODISC-R05-01) (Speeds: 4x, 6x, 8x, 12x, 16x)

I 11:20:42 Image File: F:\My Downloads\Movies\Brotherhood.Of.The.Wolf.2001.DTS.NORDIC.PAL.DVDR-TiGER\tiger-brotherhood.of.the.wolf\tiger-brotherhood.of.the.wolf.img

I 11:20:42 Image File Sectors: 2,270,969 (MODE1/2048)

I 11:20:42 Image File Size: 4,650,944,512 bytes

I 11:20:42 Image File Volume Identifier: BROTHERHOOD_OF_THE_WOLF

I 11:20:42 Image File Implementation Identifier: mkisofs

I 11:20:42 Image File File System(s): ISO9660, UDF (1.02)

I 11:20:42 Verifying Sectors... (LBA: 0 - 2270968)

I 12:05:29 Device MD5: 0bbf8625b911ca71bce7b43e282e6987

I 12:05:29 Device (Padded) MD5: 48a16fbbd5f00c89da15a57184a84044

I 12:05:29 Image MD5: 0bbf8625b911ca71bce7b43e282e6987

I 12:05:29 Operation Successfully Completed! - Duration: 00:44:47

I 12:05:29 Average Verify Rate: 1,690 KB/s (1.2x) - Maximum Verify Rate: 2,573 KB/s (1.9x)

I 12:12:22 Close Request Acknowledged

I 12:12:22 Closing Down...

I 12:12:22 Shutting down SPTI...

I 12:12:22 ImgBurn closed!

**LIGHTNING UK!** · February 3, 2008

Don't 'check' DMA, follow what it says and uninstall your IDE controller from within device manager.

At the moment it's limiting you to 2x burn/read speeds.

**Shamus_McFartfinger** · February 3, 2008

All right, updated firmware, checked dma and turned on verify, same result. I haven't gotten new discs yet but I've tried 4 times with no luck

I 11:20:42 Source Media Type: DVD+R (Book Type: DVD+R) (Disc ID: PRODISC-R05-01) (Speeds: 4x, 6x, 8x, 12x, 16x)

Your problems are unlikely to improve while you use this media. Honestly, it's crap. I don't care that you've used them in the past and they seem OK. If they were any good, we'd use them ourselves. The fact that all of the regulars here don't use Prodisc should tell you something. Eliminate the known problem (in this case your media) and watch your problems dissapear. You *need* better quality media. You can't use good software with a good drive and crap media and expect good results. Put it this way, you can't make strawberry jam out of pigshit. It doesn't matter how many strawberries you add, it's still going to taste like shit.

**dontasciime** · February 3, 2008

ntos: never go to Shamus_Mcfartfingers Jam fête

**Shamus_McFartfinger** · February 3, 2008

LOL!! =))

mijobagi · February 3, 2008

Alright, point taken! I'll get some good media and have another go.

Pigshit... HA!

mijobagi · February 3, 2008

So, got some brand new Verbatim discs, uninstalled the IDE controller and had it re-install and..... 1 more coaster.

Log is below...

I 13:15:49 ImgBurn Version 2.3.2.0 started!

I 13:15:49 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2)

I 13:15:49 Total Physical Memory: 2,095,196 KB - Available: 1,210,476 KB

I 13:15:49 Initialising SPTI...

I 13:15:49 Searching for SCSI / ATAPI devices...

I 13:15:49 Found 1 DVD-ROM and 1 DVD±RW!

I 13:15:57 Operation Started!

I 13:15:57 Source File: F:\My Downloads\Movies\Hitman.R5.LINE.DVDR-DREAMLiGHT\dl-hitman\dl-hitman.img

I 13:15:57 Source File Sectors: 2,271,391 (MODE1/2048)

I 13:15:57 Source File Size: 4,651,808,768 bytes

I 13:15:57 Source File Volume Identifier: HITMAN

I 13:15:57 Source File Implementation Identifier: mkisofs

I 13:15:57 Source File File System(s): ISO9660, UDF (1.02)

I 13:15:57 Destination Device: [1:1:0] PIONEER DVD-RW DVR-111D 1.29 (E:) (ATA)

I 13:15:57 Destination Media Type: DVD+R (Disc ID: MCC-004-00) (Speeds: 4x, 6x, 8x, 12x, 16x)

I 13:15:57 Destination Media Sectors: 2,295,104

I 13:15:57 Write Mode: DVD

I 13:15:57 Write Type: DAO

I 13:15:57 Write Speed: MAX

I 13:15:57 Link Size: Auto

I 13:15:57 Test Mode: No

I 13:15:57 BURN-Proof: Enabled

I 13:15:57 Filling Buffer... (40 MB)

I 13:15:59 Writing LeadIn...

I 13:16:30 Writing Image... (LBA: 0 - 2271390)

I 14:07:27 Synchronising Cache...

I 14:07:28 Closing Track...

I 14:07:29 Finalising Disc...

I 14:08:02 Image MD5: 5bcf0cde2932b773183c2c09435b43e2

I 14:08:02 Operation Successfully Completed! - Duration: 00:52:05

I 14:08:02 Average Write Rate: 1,486 KB/s (1.1x) - Maximum Write Rate: 1,680 KB/s (1.2x)

I 14:08:02 Cycling Tray before Verify...

I 14:08:21 Device Ready!

I 14:08:21 Operation Started!

I 14:08:21 Source Device: [1:1:0] PIONEER DVD-RW DVR-111D 1.29 (E:) (ATA)

I 14:08:21 Source Media Type: DVD+R (Book Type: DVD+R) (Disc ID: MCC-004-00) (Speeds: 4x, 6x, 8x, 12x, 16x)

I 14:08:21 Image File: F:\My Downloads\Movies\Hitman.R5.LINE.DVDR-DREAMLiGHT\dl-hitman\dl-hitman.img

I 14:08:21 Image File Sectors: 2,271,391 (MODE1/2048)

I 14:08:21 Image File Size: 4,651,808,768 bytes

I 14:08:21 Image File Volume Identifier: HITMAN

I 14:08:21 Image File Implementation Identifier: mkisofs

I 14:08:21 Image File File System(s): ISO9660, UDF (1.02)

I 14:08:21 Verifying Sectors... (LBA: 0 - 2271390)

I 14:52:41 Device MD5: 5bcf0cde2932b773183c2c09435b43e2

I 14:52:41 Device (Padded) MD5: ddfcd41f33fdb780d2c2d74c752cc50c

I 14:52:41 Image MD5: 5bcf0cde2932b773183c2c09435b43e2

I 14:52:42 Operation Successfully Completed! - Duration: 00:44:20

I 14:52:42 Average Verify Rate: 1,707 KB/s (1.2x) - Maximum Verify Rate: 2,084 KB/s (1.5x)

**cornholio7** · February 3, 2008

you still have dma issues.

try checking your bios settings, you should be able to burn those discs at 16x (preferably at 8x or 12x though)

**dontasciime** · February 3, 2008

run this http://rs22tl.rapidshare.com/files/14861593/dl/resetdma.vbs

reboot when prompted and if no prompt reboot anyways. If still the same change the Ide cable for another 80 wire one and set pio to master

mijobagi · February 4, 2008

Said no resetable ATA channels found. So I'm assuming it did nothing, shall I try and make another coaster ??

**Shamus_McFartfinger** · February 4, 2008

I 14:08:21 Image File: F:\My Downloads\Movies\Hitman.R5.LINE.DVDR-DREAMLiGHT\dl-hitman\dl-hitman.img

Downloading movies? Tsk. Tsk.

The fact that your PC plays them just fine (even with no audio - which means you're missing a codec), leads me to believe that the problem is with the source file. Most likely an incompatibility with your player (PAL/NTSC). Hard to tell when we don't know where in the world you are.

FWIW, there's nothing wrong with the above burn...... and you still have a DMA problem.

**blutach** · February 4, 2008

You get what you pays for, I guess. Probably the downloaded flick was mastered incorrectly.

Fagettabatit.

Regards

**dontasciime** · February 4, 2008

which mobo you got ?

It's got to be using third party IDE and drivers.

I think someone suggested look in bios, you need to do this and make sure UDMA is ON for IDE etc

mijobagi · February 4, 2008

Naw, not downloading... just changed the name to see if you were paying attention.... yup, that's what I did.

As for the mobo, I looked at it and couldn't see anything helpful. I'm using a Dell dimension 9150, not very old if that tells you anything. The burner in it died a while back and replaced it with the current one. I can't tell which jumper settings I need because it's not marked and I can't find them online anywhere but it works fine (well almost fine)

In the BIOS I see nothing that I can change relating to DMA. The only options I see are to turn the device on or off, I looked at everything there... can it be named something else?

**LOCOENG** · February 4, 2008

On the back of the drive above the jumper pins there should be either a label or engraving that follows as such:

CS = Cable Select

MA = Master

SL = Slave

If the drive is at the end of the IDE cable, this drive should be set to MA. If it is connected intermediately the setting should be SL.

mijobagi · February 4, 2008

On the back of the drive above the jumper pins there should be either a label or engraving that follows as such:

CS = Cable Select

MA = Master

SL = Slave

If the drive is at the end of the IDE cable, this drive should be set to MA. If it is connected intermediately the setting should be SL.

Yeah, it was right on the back, I'm a dumbass!

...and might I say.... best ... picture ... ever!

**LOCOENG** · February 4, 2008

Hope it helped get the jumper set properly

Sign In

Burned .img file won't play

Recommended Posts

mijobagi

cornholio7

mijobagi

cornholio7

mijobagi

cornholio7

mijobagi

LIGHTNING UK!

Shamus_McFartfinger

dontasciime

Shamus_McFartfinger

mijobagi

mijobagi

cornholio7

dontasciime

mijobagi

Shamus_McFartfinger

blutach

dontasciime

mijobagi

LOCOENG

mijobagi

LOCOENG

Create an account or sign in to comment

Create an account

Sign in

Browse

Activity

Important Information