maddog6375 Posted February 7, 2008 Posted February 7, 2008 im try ing to update firmware on my pioneer 115d burner the firmware is at 1.06 and trrying to update to 1.18 when i go to do it i get this message /// ODD Firmware Update Utility Ver2.57A Start updating the device No.1. Current Revision>> PIONEER DVD-RW DVR-115D 1.06 07/09/12 Now updating the firmware. Please do not turn off the power and do not reset the pc. Failed to move to the kernel mode. Update program is terminated by occuring an error. please can some 1 help many thanx mark
jmet Posted February 7, 2008 Posted February 7, 2008 Where did you download the firmware? Was it a zip file? Did you extract all files or did you just double click the setup file within the zip container?
LIGHTNING UK! Posted February 7, 2008 Posted February 7, 2008 How is the drive connected? IDE / USB / Firewire etc? What controller is it on (if the answer to the above is IDE) ? If IDE, have you tried updating the controller drivers? They could be blocking the commands used by the firmware flasher.
maddog6375 Posted February 7, 2008 Author Posted February 7, 2008 (edited) How is the drive connected? IDE / USB / Firewire etc? What controller is it on (if the answer to the above is IDE) ? If IDE, have you tried updating the controller drivers? They could be blocking the commands used by the firmware flasher. i conncted with a usb dont know much about controllers sorry Edited February 7, 2008 by maddog6375
maddog6375 Posted February 7, 2008 Author Posted February 7, 2008 Where did you download the firmware? Was it a zip file? Did you extract all files or did you just double click the setup file within the zip container? it was a zip file i double clicked on set up file many thanx md
jmet Posted February 7, 2008 Posted February 7, 2008 Extract all the files to a folder on your hard drive. Then go to that folder and click the setup file in that folder.
Shamus_McFartfinger Posted February 7, 2008 Posted February 7, 2008 Also, make sure there's no disk in the drive before flashing.
LIGHTNING UK! Posted February 7, 2008 Posted February 7, 2008 Plug it in internally if it won't work in your USB enclosure. I'm not sure you can go far wrong wit the actual update process, it's only 2 files in a zip!
maddog6375 Posted February 7, 2008 Author Posted February 7, 2008 Extract all the files to a folder on your hard drive. Then go to that folder and click the setup file in that folder. i did do that but it just came up with same thing
maddog6375 Posted February 7, 2008 Author Posted February 7, 2008 (edited) Did you try LUK suggestion? sorry boys im a bit of a noob with computers how would i go about plug it in internally? Edited February 7, 2008 by maddog6375
LIGHTNING UK! Posted February 7, 2008 Posted February 7, 2008 Well I guess the first thing you need to do is take it out of the external enclosure. When you've done that, take the side off your PC, locate the IDE cable / spare IDE socket on the motherboard and connect it up. Don't forget the power lead! It's hard for us to tell you exactly how to do it until we know more about the internals of your machine.
dontasciime Posted February 7, 2008 Posted February 7, 2008 you should have two files after extracting rar or zip A0814001.118 which is the firmware and the flasher R115D.exe I flashed mine in a Usb enclosure but there are many different chipsets in enclosures. The chipset in the enclosure I flashed mine in was GL811E try downloading the firmware I used http://rapidshare.com/files/85925345/DVR115D_FW118EU2.zip The above download also has mcse in package ignore that and just make sure you have the 2 files at top of post in same directory. Make sure the drive is jumpered to master when in enclosure
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now