bigguy88 Posted February 28, 2008 Posted February 28, 2008 Hi, I just upgraded the firmware on my external Sony DRX - 810UL and now no matter what program I use it will get to either 3.2% or 3.4% completed during the writing process then stop doing anything... The first time this happened to me I let it sit for 5 hours and it didn't move at all. Of course I forgot to set a roll back point for the driver before updating firmware so now I feel that I'm stuck with what I've done. I was attempting to copy a DL DVD, I haven't attempted a regular dvd yet. Media I'm using is Verbatim DVD+R DL at 2.4X write speed. No error messages occur, it just stops doing anything what so ever. Anyone have any suggestions for me? Nick
LOCOENG Posted February 28, 2008 Posted February 28, 2008 I was attempting to copy a DL DVD, I haven't attempted a regular dvd yet. I would master SL DVD's before I dive into DL media as they are much less expensive to play with.
spinningwheel Posted February 28, 2008 Posted February 28, 2008 I was attempting to copy a DL DVD If it's protected by the author ImgBurn will not copy it. Post a log from the failure.
bigguy88 Posted February 28, 2008 Author Posted February 28, 2008 I was attempting to copy a DL DVD, I haven't attempted a regular dvd yet. I would master SL DVD's before I dive into DL media as they are much less expensive to play with. I didn't say this was my first time burning... I just decided to upgrade firmware today and now I'm having an issue I can't solve. Thanks for the reply though.
bigguy88 Posted February 28, 2008 Author Posted February 28, 2008 I was attempting to copy a DL DVD If it's protected by the author ImgBurn will not copy it. Post a log from the failure. Continue reading what I wrote. There was never an error log, it just stopped writing and the program kept running. And the dvd isn't copy protected.
bigguy88 Posted February 28, 2008 Author Posted February 28, 2008 Help --> ImgBurn Logs Regards Thanks but like I said theres no logs in that folder.
spinningwheel Posted February 28, 2008 Posted February 28, 2008 it will get to either 3.2% or 3.4% completed during the writing process then stop doing anything... IB does a lot before it gets that far along and it does make a lot of log entries before it gets to this error point. Post what you do have up to this point. Continue reading what I wrote Nick, I did. OOPS didn't see you were posting....Try to do the burn again and see if you can cut/paste the log after it stops working...
bigguy88 Posted February 28, 2008 Author Posted February 28, 2008 it will get to either 3.2% or 3.4% completed during the writing process then stop doing anything... IB does a lot before it gets that far along and it does make a lot of log entries before it gets to this error point. Post what you do have up to this point. Continue reading what I wrote Nick, I did. Sorry just agitated with this burner at the moment so if I seem a bit rude I apologize. I clicked cancel the burn on Imgburn and it froze so I close the program through process on windows task manager. No logs were recorded. I gave it a few minutes before I did that though to see if it would respond and it didn't so I just closed it...
LOCOENG Posted February 28, 2008 Posted February 28, 2008 No logs were recorded. I gave it a few minutes before I did that though to see if it would respond and it didn't so I just closed it... As spinner said Imgburn has a running log of what is happening as well as the state of your PC while you are attempting a burn. If you don't see a log press Ctrl+L to open it, then retry a burn and post the entire log here in this thread.
bigguy88 Posted February 28, 2008 Author Posted February 28, 2008 No logs were recorded. I gave it a few minutes before I did that though to see if it would respond and it didn't so I just closed it... As spinner said Imgburn has a running log of what is happening as well as the state of your PC while you are attempting a burn. If you don't see a log press Ctrl+L to open it, then retry a burn and post the entire log here in this thread. Id rather not waste another DL... It's not just with ImgBurn it's with any program. I'll try it with a regular dvd and get back t you with the logs
LOCOENG Posted February 29, 2008 Posted February 29, 2008 It's not just with ImgBurn it's with any program Sounds like you've got problems....
bigguy88 Posted March 4, 2008 Author Posted March 4, 2008 It's not just with ImgBurn it's with any program Sounds like you've got problems.... Apparently... I 15:06:20 ImgBurn Version 2.4.0.0 started! I 15:06:20 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 15:06:20 Total Physical Memory: 490,992 KB - Available: 125,768 KB I 15:06:21 Initialising SPTI... I 15:06:21 Searching for SCSI / ATAPI devices... I 15:06:21 Found 1 CD-RW, 1 DVD-ROM and 1 DVD±RW! I 15:31:10 Operation Started! I 15:31:10 Building Image Tree... I 15:31:13 Checking Directory Depth... I 15:31:13 Calculating Totals... I 15:31:13 Preparing Image... I 15:31:20 Using Layer Break LBA: 1837647 -> 1837648 (VTS_01, PGC: 3, Chapter: 1, Cell: 1, Vob/Cell ID: 3/1, Time: 00:00:00, SPLIP: No) I 15:31:20 Checking Path Length... I 15:31:20 Contents: 21 Files, 2 Folders I 15:31:20 Size: 7,507,019,776 bytes I 15:31:20 Sectors: 3,665,537 I 15:31:20 Image Size: 7,507,640,320 bytes I 15:31:20 Image Sectors: 3,665,840 I 15:31:25 Operation Successfully Completed! - Duration: 00:00:14 I 15:31:25 Operation Started! I 15:31:25 Source File: -==/\/[bUILD IMAGE]\/\==- I 15:31:25 Source File Sectors: 3,665,840 (MODE1/2048) I 15:31:25 Source File Size: 7,507,640,320 bytes I 15:31:25 Source File Volume Identifier: DVD I 15:31:25 Source File Application Identifier: IMGBURN V2.4.0.0 - THE ULTIMATE IMAGE BURNER! I 15:31:25 Source File Implementation Identifier: ImgBurn I 15:31:25 Source File File System(s): ISO9660, UDF (1.02) I 15:31:25 Destination Device: [0:0:0] SONY DVD RW DRU-810A 2.0f (J:) (USB) I 15:31:25 Destination Media Type: DVD+R DL (Disc ID: RITEK-D01-01) (Speeds: 2.4x) I 15:31:25 Destination Media Sectors: 4,173,824 I 15:31:25 Write Mode: DVD I 15:31:25 Write Type: DAO I 15:31:25 Write Speed: 2x I 15:31:25 Link Size: Auto I 15:31:25 Test Mode: No I 15:31:25 OPC: Yes I 15:31:25 BURN-Proof: Enabled W 15:32:00 Optimum Power Calibration Failed! - Reason: Track Following Error W 15:32:00 Retrying (1)... I 15:32:27 Optimal L0 Data Zone Capacity: 1,837,648 I 15:32:27 Optimal L0 Data Zone Method: IFO Cell Boundary, 'SPLIP' Flag Not Set I 15:32:28 Filling Buffer... (20 MB) I 15:32:29 Writing LeadIn... I 15:32:33 Writing Session 1 of 1... (1 Track, LBA: 0 - 3665839) I 15:32:33 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3665839) I 15:32:33 Writing Layer 0... (LBA: 0 - 1837647) W 16:55:53 Failed to Write Sectors 992 - 1023 - The semaphore timeout period has expired. W 16:55:53 Retrying (1 of 20)... W 16:56:13 Retry Failed - Invalid Address For Write W 16:56:13 Retrying (2 of 20)... W 16:56:14 Retry Failed - Invalid Address For Write W 16:56:14 Retrying (3 of 20)... W 16:56:14 Retry Failed - Invalid Address For Write W 16:56:14 Retrying (4 of 20)... W 16:56:14 Retry Failed - Invalid Address For Write W 16:56:14 Retrying (5 of 20)... W 16:56:14 Retry Failed - Invalid Address For Write W 16:56:14 Retrying (6 of 20)... W 16:56:14 Retry Failed - Invalid Address For Write W 16:56:14 Retrying (7 of 20)... W 16:56:14 Retry Failed - Invalid Address For Write W 16:56:14 Retrying (8 of 20)... W 16:56:14 Retry Failed - Invalid Address For Write W 16:56:14 Retrying (9 of 20)... W 16:56:14 Retry Failed - Invalid Address For Write W 16:56:14 Retrying (10 of 20)... W 16:56:14 Retry Failed - Invalid Address For Write W 16:56:14 Retrying (11 of 20)... W 16:56:14 Retry Failed - Invalid Address For Write W 16:56:14 Retrying (12 of 20)... W 16:56:14 Retry Failed - Invalid Address For Write W 16:56:14 Retrying (13 of 20)... W 16:56:14 Retry Failed - Invalid Address For Write W 16:56:14 Retrying (14 of 20)... W 16:56:14 Retry Failed - Invalid Address For Write W 16:56:14 Retrying (15 of 20)... W 16:56:14 Retry Failed - Invalid Address For Write W 16:56:14 Retrying (16 of 20)... W 16:56:14 Retry Failed - Invalid Address For Write W 16:56:14 Retrying (17 of 20)... W 16:56:14 Retry Failed - Invalid Address For Write W 16:56:14 Retrying (18 of 20)... W 16:56:14 Retry Failed - Invalid Address For Write W 16:56:14 Retrying (19 of 20)... W 16:56:14 Retry Failed - Invalid Address For Write W 16:56:14 Retrying (20 of 20)... W 16:56:14 Retry Failed - Invalid Address For Write E 02:52:07 Failed to Write Sectors 992 - 1023 - The semaphore timeout period has expired. E 02:52:08 Next Writable Address: 960 I 02:52:08 Synchronising Cache... W 02:52:22 User opted to skip the 'Close Track/Session/Disc' functions. E 02:52:22 Failed to Write Image! I 02:52:25 Exporting Graph Data... I 02:52:27 Graph Data File: C:\Documents and Settings\Nick\Application Data\ImgBurn\IBG Files\SONY_DVD_RW_DRU-810A_2.0f_MONDAY-MARCH-03-2008_3-31_PM_RITEK-D01-01_2x.ibg I 02:52:27 Export Successfully Completed! E 02:52:27 Operation Failed! - Duration: 11:20:57 I 02:52:27 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x) Thats the newest log... I did a system restore to see if it would roll back my driver as well but apparently it didnt. It didnt even start to write to the dvd this time... so I dont know what thats about. Nick
dontasciime Posted March 4, 2008 Posted March 4, 2008 Try changing the I/O to Wnaspi32 and get some better disc's Look to buy another dvd writer that can be placed in your tower case.
JasonFriday13 Posted March 6, 2008 Posted March 6, 2008 Also, the infamous Semaphore Timeout error. Maybe your usb port isn't 2.0?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now