burn 360 game with img burn

[leo5111]

i backup my 360 games with my kreon drive i goto burn image using my poineer 212d at some point during the burn the write speed set at 2.4x will allmost crash to zero but then speeds back up to 2.4 again usualy seems like 60% or more through burn what setting could it be?? and also in image burn i see option for buffer size its set for 20 meg would giving more buffer help?? thanks EDIT its a sata burner

Edited February 29, 2008 by leo5111

[mmalves]

Please post the log from that burn (you can find it at Help/ImgBurn Logs)

[leo5111]

Please post the log from that burn (you can find it at Help/ImgBurn Logs)

 

I 13:01:59 ImgBurn Version 2.1.0.0 started!

I 13:01:59 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 13:01:59 Initialising SPTI...

I 13:01:59 Searching for SCSI / ATAPI devices...

I 13:01:59 Found 1 DVD-ROM and 1 DVD±RW!

I 13:02:17 Operation Started!

I 13:02:17 Source File: G:\kreon folder\ turning point fall of liberty.dvd

I 13:02:17 Source File Sectors: 3,825,924 (MODE1/2048)

I 13:02:17 Source File Size: 7,835,492,352 bytes

I 13:02:17 Source File Volume Identifier: XGD2DVD_NTSC

I 13:02:17 Source File Implementation Identifier: Sonic Scenarist 3.1

I 13:02:17 Source File File System(s): ISO9660, UDF (1.02)

I 13:02:17 Destination Device: [1:1:0] PIONEER DVD-RW DVR-212D 1.21 (D:) (ATA)

I 13:02:17 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x, 8x)

I 13:02:17 Destination Media Sectors: 4,173,824

I 13:02:17 Write Mode: DVD

I 13:02:17 Write Type: DAO

I 13:02:17 Write Speed: 2.4x

I 13:02:17 Link Size: Auto

I 13:02:17 Test Mode: No

I 13:02:17 BURN-Proof: Enabled

I 13:02:17 Optimal L0 Data Zone Capacity: 1,913,760

I 13:02:17 Optimal L0 Data Zone Method: Copied From Original Disc

I 13:02:42 Filling Buffer...

I 13:02:42 Writing LeadIn...

I 13:02:44 Writing Image...

I 13:02:44 Writing Layer 0... (LBA: 0 - 1913759)

I 13:22:41 Writing Layer 1... (LBA: 1913760 - 3825923)

I 13:42:59 Synchronising Cache...

I 13:43:00 Closing Track...

I 13:43:01 Finalising Disc...

I 13:44:01 Image MD5: 28b0d12715c0b5a6d5f1c8d1879ac6aa

I 13:44:04 Operation Successfully Completed! - Duration: 00:41:44

I 13:44:04 Average Write Rate: 3,168 KB/s (2.3x) - Maximum Write Rate: 3,490 KB/s (2.5x)

I 13:44:08 Close Request Acknowledged

I 13:44:08 Closing Down...

I 13:44:08 Shutting down SPTI...

I 13:44:08 ImgBurn closed!

[Cynthia]

I 13:01:59 ImgBurn Version 2.1.0.0 started!

 

There is a later version.

 

[leo5111]

I 13:01:59 ImgBurn Version 2.1.0.0 started!

 

There is a later version.

 

i know i had 2.4 i noticed it on 2.4 first so i went to older version to try and today i just put latest pioneer firmware on the burner so we will see next time i burn

[dontasciime]

My pioneer 111 112 115 does that whilst burning xbox 360 on DL. As long as buffer did not empty at same time.

 

Get dvdinfo pro and check graph for rapid drop

 

I 13:44:04 Operation Successfully Completed! - Duration: 00:41:44

 

 

Thats normal time for 2.4x on 360 backup (give or take a couple of secs)

[leo5111]

the 1 buffer stays 100% full the other buffer dips like 87% or somthing but never 0 or anywhere near 0 buffer

[luv10069]

My pioneer 111 112 115 does that whilst burning xbox 360 on DL. As long as buffer did not empty at same time.

 

Get dvdinfo pro and check graph for rapid drop

 

I 13:44:04 Operation Successfully Completed! - Duration: 00:41:44

 

 

Thats normal time for 2.4x on 360 backup (give or take a couple of secs)

do you recommend xbc and can you still use it on live

thanks for the help