how to use the CD after Image burn

[Ajoymi2]

Hi

I am new at burning ISO's, Cue's and Bin images I purchased Serif Drawplus8 and Logo Design studio Pro 3 did not know they would not be shipping a physical CD copy with the Download. I have been searching through forums and ISO burning programs trying to find out what to do with these ISO images and cue/bin files. I downloaded IsoRecorder/Isobuster they

sent Daemon tools with it and I downloaded it but I do not know how to make the mounted image work. I contacted their support and told them I couldn't get the ISO's mounted or burned and they told me to download Imgburn so I did and followed the instructions................. How to burn an image file with Imgburn and here I am.

There's nothing on the Cd it's empty after I finished burning the ISO and it's said it was a successful burn and made a bunch of noise. it also said my Power Calibration failed but I just continued. What do I do now. I would like to have my programs installed on my computer so I can use them.

 

Here's a copy of the programs Log......................

I 00:20:46 ImgBurn Version 2.4.0.0 started!

I 00:20:46 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)

I 00:20:46 Total Physical Memory: 785,772 KB - Available: 234,316 KB

I 00:20:47 Initialising SPTI...

I 00:20:47 Searching for SCSI / ATAPI devices...

I 00:20:49 Found 1 DVD-ROM and 1 DVD-ROM/CD-RW!

I 00:35:07 Operation Started!

I 00:35:07 Source File: C:\Documents and Settings\JSD\My Documents\Serif DrawPlus 8.iso

I 00:35:07 Source File Sectors: 301 (MODE1/2048)

I 00:35:07 Source File Size: 616,448 bytes

I 00:35:07 Source File Volume Identifier: 20080301

I 00:35:07 Source File Application Identifier: ††††††††††††††††††††††††††

[Kraz]

I had the exact same problem tonight. I can read the contents of my ISO file on the hard drive with IZArc (it is a Windows XP Bootable disk image), but after it apparently successfully burns and is verified with the most recent Image Burn software, nothing is windows explorer sees nothing on the CD nor will it boot.

 

My log file follows. Any ideas? Thanks - Kraz

 

I 01:53:57 ImgBurn Version 2.4.0.0 started!

I 01:53:57 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)

I 01:53:57 Total Physical Memory: 1,047,856 KB - Available: 350,032 KB

I 01:54:03 Initialising SPTI...

I 01:54:03 Searching for SCSI / ATAPI devices...

I 01:54:03 Found 1 DVD±RW!

I 02:04:45 Operation Started!

I 02:04:45 Source File: C:\Documents and Settings\Mel\My Documents\Downloads\Torrent Downloads\Windows XP Pro SP2 Feb 2008\Microsoft.Windows.XP.Professional.Corporate.SP2.Integrated.February.2008-ETH0\e-xpc2fb2k8\e-xpc2fb2k8.iso

I 02:04:45 Source File Sectors: 324,570 (MODE1/2048)

I 02:04:45 Source File Size: 664,719,360 bytes

I 02:04:45 Source File Volume Identifier: V2PRMVOL_EN

I 02:04:45 Source File Application Identifier: CDIMAGE 2.47 (10/12/2000 TM)

I 02:04:45 Source File File System(s): ISO9660 (Bootable), Joliet

I 02:04:45 Destination Device: [0:0:0] SONY DVD RW DW-D56A PFS2 (E:) (ATA)

I 02:04:45 Destination Media Type: CD-R (Disc ID: 97m32s19f) (Speeds: 4x, 10x, 12x, 16x, 20x, 24x)

I 02:04:45 Destination Media Sectors: 359,844

I 02:04:45 Write Mode: CD

I 02:04:45 Write Type: SAO

I 02:04:45 Write Speed: MAX

I 02:04:45 Test Mode: No

I 02:04:45 OPC: Yes

I 02:04:45 BURN-Proof: Enabled

W 02:05:16 DeviceIoControl(FSCTL_LOCK_VOLUME) Failed! - Reason: Access is denied.

W 02:05:16 DeviceIoControl(FSCTL_DISMOUNT_VOLUME) Failed! - Reason: Access is denied.

I 02:05:26 Filling Buffer... (40 MB)

I 02:05:28 Writing LeadIn...

I 02:05:44 Writing Session 1 of 1... (1 Track, LBA: 0 - 324569)

I 02:05:44 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 324569)

I 02:11:49 Synchronising Cache...

I 02:11:58 Exporting Graph Data...

I 02:11:58 Graph Data File: C:\Documents and Settings\Mel\Application Data\ImgBurn\IBG Files\SONY_DVD_RW_DW-D56A_PFS2_WEDNESDAY-MARCH-05-2008_2-04_AM_97m32s19f_MAX.ibg

I 02:11:58 Export Successfully Completed!

I 02:11:58 Operation Successfully Completed! - Duration: 00:07:12

I 02:11:58 Average Write Rate: 1,783 KB/s (11.9x) - Maximum Write Rate: 2,435 KB/s (16.2x)

I 02:11:58 Cycling Tray before Verify...

W 02:22:42 Waiting for device to become ready...

I 02:22:58 Device Ready!

I 02:23:02 Operation Started!

I 02:23:02 Source Device: [0:0:0] SONY DVD RW DW-D56A PFS2 (E:) (ATA)

I 02:23:02 Source Media Type: CD-R (Disc ID: 97m32s19f) (Speeds: 4x, 10x, 12x, 16x, 20x, 24x)

I 02:23:02 Image File: C:\Documents and Settings\Mel\My Documents\Downloads\Torrent Downloads\Windows XP Pro SP2 Feb 2008\Microsoft.Windows.XP.Professional.Corporate.SP2.Integrated.February.2008-ETH0\e-xpc2fb2k8\e-xpc2fb2k8.iso

I 02:23:02 Image File Sectors: 324,570 (MODE1/2048)

I 02:23:02 Image File Size: 664,719,360 bytes

I 02:23:02 Image File Volume Identifier: V2PRMVOL_EN

I 02:23:02 Image File Application Identifier: CDIMAGE 2.47 (10/12/2000 TM)

I 02:23:02 Image File File System(s): ISO9660 (Bootable), Joliet

I 02:23:02 Read Speed (Data/Audio): MAX / MAX

I 02:23:03 Verifying Session 1 of 1... (1 Track, LBA: 0 - 324569)

I 02:23:03 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 324569)

I 02:27:12 Exporting Graph Data...

I 02:27:12 Graph Data File: C:\Documents and Settings\Mel\Application Data\ImgBurn\IBG Files\SONY_DVD_RW_DW-D56A_PFS2_WEDNESDAY-MARCH-05-2008_2-04_AM_97m32s19f_MAX.ibg

I 02:27:12 Export Successfully Completed!

I 02:27:12 Operation Successfully Completed! - Duration: 00:04:09

I 02:27:12 Average Verify Rate: 2,617 KB/s (17.4x) - Maximum Verify Rate: 3,615 KB/s (24.1x)

 

 

--------------------------------------------------------------------------------------------

 

Hi

I am new at burning ISO's, Cue's and Bin images I purchased Serif Drawplus8 and Logo Design studio Pro 3 did not know they would not be shipping a physical CD copy with the Download. I have been searching through forums and ISO burning programs trying to find out what to do with these ISO images and cue/bin files. I downloaded IsoRecorder/Isobuster they

sent Daemon tools with it and I downloaded it but I do not know how to make the mounted image work. I contacted their support and told them I couldn't get the ISO's mounted or burned and they told me to download Imgburn so I did and followed the instructions................. How to burn an image file with Imgburn and here I am.

There's nothing on the Cd it's empty after I finished burning the ISO and it's said it was a successful burn and made a bunch of noise. it also said my Power Calibration failed but I just continued. What do I do now. I would like to have my programs installed on my computer so I can use them.

 

Here's a copy of the programs Log......................

I 00:20:46 ImgBurn Version 2.4.0.0 started!

I 00:20:46 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)

I 00:20:46 Total Physical Memory: 785,772 KB - Available: 234,316 KB

I 00:20:47 Initialising SPTI...

I 00:20:47 Searching for SCSI / ATAPI devices...

I 00:20:49 Found 1 DVD-ROM and 1 DVD-ROM/CD-RW!

I 00:35:07 Operation Started!

I 00:35:07 Source File: C:\Documents and Settings\JSD\My Documents\Serif DrawPlus 8.iso

I 00:35:07 Source File Sectors: 301 (MODE1/2048)

I 00:35:07 Source File Size: 616,448 bytes

I 00:35:07 Source File Volume Identifier: 20080301

I 00:35:07 Source File Application Identifier: ††††††††††††††††††††††††††

[mmalves]

In both cases the CDs seem to have burnt OK, as both verified fine after burning. Check the CDs and source images with IsoBuster and see if they match (they should).

[Kraz]

IsoBuster reads the CD fine and sees everything. Interestingly, so does a MacBook Pro with Leopard. Windows Explorer on the Windows XP(Home version, SP2) machine on which I burnt the CD on with Image Burn shows nothing on the disc and this computer does not AutoRun or boot from it either. Any other ideas?? Thanks.

 

 

In both cases the CDs seem to have burnt OK, as both verified fine after burning. Check the CDs and source images with IsoBuster and see if they match (they should).

[mmalves]

In ImgBurn, go to Tools/Filter Driver Load Order, click the Clipboard button and paste it here.

[Kraz]

As requested, here's the info:

 

===============================================

Filter Driver Load Order - ImgBurn v2.4.0.0

===============================================

 

Upper Device Filter: redbook

Upper Class Filter: GEARAspiWDM

Device: CD/DVD-ROM Device

Lower Class Filter: MrFilter

Lower Class Filter: PxHelp20

Lower Device Filter: imapi

 

Filter Name: redbook

File Name: C:\WINDOWS\system32\DRIVERS\redbook.sys

File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)

File Description: Redbook Audio Filter Driver

Product Name: Microsoft® Windows® Operating System

Product Version: 5.1.2600.2180

Company Name: Microsoft Corporation

Copyright: © Microsoft Corporation. All rights reserved.

 

Filter Name: GEARAspiWDM

File Name: C:\WINDOWS\System32\Drivers\GEARAspiWDM.sys

File Version: 2.0.6.1

File Description: CD/DVD Class Filter Driver

Product Name: GEAR.wrks

Product Version: 8.xx [2.0.6.1]

Company Name: GEAR Software Inc.

Copyright: Copyright © GEAR Software Inc. 2006

 

Filter Name: MrFilter

File Name: C:\WINDOWS\system32\Drivers\MrFilter.sys

File Version: 6.2.0.129

File Description: EasyWrite Filter Driver

Product Name: Drag-to-Disc

Product Version: 6.2.0.129

Company Name: Roxio

Copyright: Copyright © 1999-2003 Roxio, Inc.

 

Filter Name: PxHelp20

File Name: C:\WINDOWS\System32\Drivers\PxHelp20.sys

File Version: 3.00.10a [3.0.10.0]

File Description: Px Engine Device Driver for Windows 2000/XP

Product Name: PxHelp20

Product Version: [2.0.0.0]

Company Name: Sonic Solutions

Copyright: Copyright © Sonic Solutions

 

Filter Name: imapi

File Name: C:\WINDOWS\system32\DRIVERS\imapi.sys

File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)

File Description: IMAPI Kernel Driver

Product Name: Microsoft® Windows® Operating System

Product Version: 5.1.2600.2180

Company Name: Microsoft Corporation

Copyright: © Microsoft Corporation. All rights reserved.

 

 

 

 

In ImgBurn, go to Tools/Filter Driver Load Order, click the Clipboard button and paste it here.

[homerj32]

I had this problem previously with older firmware and found that one of two things may have resolved the problem. First, I updated the firmware on the machines, and then was able to read the discs fine. But then I had the same problem on the next old machine that I received and I got to wondering, and sure enough, even without updating the firmware, if I closed ImgBurn and then let the OS look at the disc it was able to see the files. Not sure if there was a sharing/open files issue, but it was not a problem for me after that.

 

Of course it was still a problem on when I was trying to read a DVD on a machien that only had a CD drive in it, but we can't expect ImgBurn to correct (l)user errors.

[homerj32]

Looking at your log further, it is ironic to me that you are having a similar problem that I was having, trying to do what I was doing (burining and XP bootable ISO), on the same type of drive that I was using (Sony DVD, although slightly different model), using CD-R media.

 

This was the specific machine that I first had problems with that required teh firmware update, and since that time I have been using it as my 'master burner' as it has not failed since. I'd suggest making sure you have the lates, and please excuse me if you have already done so.

[Ajoymi2]

Thanks homerj32 for your reply,

I got the files downloaded and installed and I am working with them now.

What I did was make a bootable from the install on my Computer.

 

Ajoymi2

Today, 02:46 PM

[homerj32]

Not going to comment much on what you were doing as that's up to you, and is a discussion for a different forum which I am happy to meet you if you like after you aer able to read your discs.

 

I am also going to defer to mmalves knowledge and experience in all matters here, or all others who are senior to me on this forum, so if there are other suggestion than mine that appear with a stronger user rating to their profile, heed those first as I have only just begun to use the application this year! I have however used it on over 20 different burners to date, and cannot emphasize the value that I have found in updating firmware and reading the Guides.

 

The other thing that I found helpful with CD-R's was setting the File Splitting sizes for Read and Build in Tools | Settings to 650 MB, although looking at your log file, your file size should not exceed the limit of the CD, therefore you should be OK with your current image. I have since also invested in a box of CD-RW and have even been able to burn successfully with an HP CD-Writer 8100, which is 4x and 15 years old. (albeit the firmware is up the latest available.)

[homerj32]

So I have to apologize and ask for more advanced input with this one, as I was looking into providing input on another question, and this problem came up again on my personal machine which I don not use for burning all that often although I do have tow burners in it, both with update firmware.

 

The disc that I burnt (Memorex CR-RW) on a Toshiba drive did burn successfully, however when I closed ImgBurn and tried to read it through Windows, I was unable to see the files on the disc. Out of curiousity, I put the disc into the other drive (LG) and Windows saw the files no problem. I rebooted the machine to test the if the disc was bootable, removed the disc from the LG drive and put it back into the Toshiba, and lo and behold but the first one now read the disc just fine.

 

Perplexed? I am as I am not sure at the file level what sharing or handles would/could be open still that could affect this, so anyone else with more experience that would like to wrigh in is welcome.

 

Thanks.

[homerj32]

More info from another quick test: if I don't do a Verify, then the disc is readable immediately afterwards by Windows in the same drive burning the same ISO. Previously, I had always done a Verify.

 

Sorry for all the previous typos, was feeding my baby daughter at the same time.

[Kraz]

Homer, thanks for your input. I had upgraded the firmware on this drive two years ago, but your comments prompted me to see if there was anything more recent. Alas, I found only the same update utility I used last time on the Sony site, but decided to run it again. Lo and behold, it must not have run successfully two years ago becfause when I ran it again it did upgrade to a newer version. I then rebooted (had previously rebooted many times since burning the CD in question) and was able to read the CD!!!!

 

So, you were right about the firmware in my case. Thank you.

 

I don't know the answer to your question about sharing or handles, but I did burn my CD with verify on. The firmware issue appears to have been my problem, I don't think the verify function is related in my case.

 

Thanks again

[homerj32]

Glad to have helped one person on the boards.

 

And the machine in question for me today could very well be a Windows Vista problem. I generally do not have a problem with Vista, but let's face it, for a Microsoft product it can still be considered Beta.

[homerj32]

And it looks like I had my own bad flash. I had downloaded one from Toshiba for my drive model, which proved to be a bad move. Found one from HP, who are the providers of the entire system, and that one works a treat including reading the disc immediately after verifying while Imgburn is still open.