MJG Posted March 5, 2008 Posted March 5, 2008 I have been trying to burn dual layer dvds but very little success. I occasionally get one to complete successfully but more often than not they fail along the way. I use Verbatim media, have followed the guides on this site (accurately I believe) and have set ImgBurn to the default settings but can not figure out what I am doing wrong. I successfully burned about 20 single layer media (no coasters) before attempting this dual layer project. Can someone please review the attached log and see if there are any hints as to what I am doing? Thanks for any help / advice. ; //****************************************\\ ; ImgBurn Version 2.4.0.0 - Log ; Monday, 03 March 2008, 18:00:54 ; \\****************************************// ; ; I 17:33:15 ImgBurn Version 2.4.0.0 started! I 17:33:15 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 17:33:15 Total Physical Memory: 1,572,336 KB - Available: 1,079,708 KB I 17:33:15 Initialising SPTI... I 17:33:15 Searching for SCSI / ATAPI devices... I 17:33:45 Found 1 DVD±RW! I 17:34:11 Operation Started! I 17:34:11 Building Image Tree... I 17:34:11 Checking Directory Depth... I 17:34:11 Calculating Totals... I 17:34:11 Preparing Image... I 17:35:00 Using Layer Break LBA: 2069557 -> 2069568 (VTS_05, PGC: 1, Chapter: 3, Cell: 31, Vob/Cell ID: 1/31, Time: 00:22:01, SPLIP: No) I 17:35:00 Checking Path Length... I 17:35:00 Contents: 30 Files, 2 Folders I 17:35:00 Size: 7,723,589,632 bytes I 17:35:00 Sectors: 3,771,284 I 17:35:00 Image Size: 7,724,269,568 bytes I 17:35:00 Image Sectors: 3,771,616 I 17:35:00 Operation Successfully Completed! - Duration: 00:00:49 I 17:37:44 Operation Started! I 17:37:44 Building Image Tree... I 17:37:44 Checking Directory Depth... I 17:37:44 Calculating Totals... I 17:37:44 Preparing Image... I 17:37:51 Using Layer Break LBA: 2069557 -> 2069568 (VTS_05, PGC: 1, Chapter: 3, Cell: 31, Vob/Cell ID: 1/31, Time: 00:22:01, SPLIP: No) I 17:37:51 Checking Path Length... I 17:37:51 Contents: 30 Files, 2 Folders I 17:37:51 Size: 7,723,589,632 bytes I 17:37:51 Sectors: 3,771,284 I 17:37:51 Image Size: 7,724,236,800 bytes I 17:37:51 Image Sectors: 3,771,600 I 17:38:09 Operation Successfully Completed! - Duration: 00:00:24 I 17:38:09 Operation Started! I 17:38:09 Source File: -==/\/[bUILD IMAGE]\/\==- I 17:38:09 Source File Sectors: 3,771,600 (MODE1/2048) I 17:38:09 Source File Size: 7,724,236,800 bytes I 17:38:09 Source File Volume Identifier: DBL_FEAT I 17:38:09 Source File Application Identifier: IMGBURN V2.4.0.0 - THE ULTIMATE IMAGE BURNER! I 17:38:09 Source File Implementation Identifier: ImgBurn I 17:38:09 Source File File System(s): ISO9660, UDF (1.02) I 17:38:09 Destination Device: [0:0:0] LITE-ON DVDRW SOHW-1633S BS0Y (M:) (ATA) I 17:38:09 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x) I 17:38:09 Destination Media Sectors: 4,173,824 I 17:38:09 Write Mode: DVD I 17:38:09 Write Type: DAO I 17:38:09 Write Speed: MAX I 17:38:09 Link Size: Auto I 17:38:09 Test Mode: No I 17:38:09 OPC: Yes I 17:38:09 BURN-Proof: Enabled I 17:38:09 Book Type Setting: DVD-ROM I 17:38:09 Advanced Settings - Force HT: N/A, Online HT: N/A, OverSpeed: N/A, SmartBurn: Yes I 17:38:42 Optimal L0 Data Zone Capacity: 2,069,568 I 17:38:42 Optimal L0 Data Zone Method: IFO Cell Boundary, 'SPLIP' Flag Not Set I 17:38:44 Filling Buffer... (40 MB) I 17:38:46 Writing LeadIn... I 17:38:50 Writing Session 1 of 1... (1 Track, LBA: 0 - 3771599) I 17:38:50 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3771599) I 17:38:50 Writing Layer 0... (LBA: 0 - 2069567) W 17:39:51 Failed to Write Sectors 96992 - 97023 - Write Error W 17:39:51 Retrying (1 of 20)... W 17:39:52 Retry Failed - Invalid Address For Write W 17:39:52 Retrying (2 of 20)... W 17:39:52 Retry Failed - Invalid Address For Write W 17:39:52 Retrying (3 of 20)... W 17:39:52 Retry Failed - Invalid Address For Write W 17:39:52 Retrying (4 of 20)... W 17:39:52 Retry Failed - Invalid Address For Write W 17:39:52 Retrying (5 of 20)... W 17:39:52 Retry Failed - Invalid Address For Write W 17:39:52 Retrying (6 of 20)... W 17:39:52 Retry Failed - Invalid Address For Write W 17:39:52 Retrying (7 of 20)... W 17:39:52 Retry Failed - Invalid Address For Write W 17:39:52 Retrying (8 of 20)... W 17:39:52 Retry Failed - Invalid Address For Write W 17:39:52 Retrying (9 of 20)... W 17:39:52 Retry Failed - Invalid Address For Write W 17:39:52 Retrying (10 of 20)... W 17:39:52 Retry Failed - Invalid Address For Write W 17:39:52 Retrying (11 of 20)... W 17:39:52 Retry Failed - Invalid Address For Write W 17:39:52 Retrying (12 of 20)... W 17:39:52 Retry Failed - Invalid Address For Write W 17:39:52 Retrying (13 of 20)... W 17:39:52 Retry Failed - Invalid Address For Write W 17:39:52 Retrying (14 of 20)... W 17:39:52 Retry Failed - Invalid Address For Write W 17:39:52 Retrying (15 of 20)... W 17:39:52 Retry Failed - Invalid Address For Write W 17:39:52 Retrying (16 of 20)... W 17:39:52 Retry Failed - Invalid Address For Write W 17:39:52 Retrying (17 of 20)... W 17:39:52 Retry Failed - Invalid Address For Write W 17:39:52 Retrying (18 of 20)... W 17:39:52 Retry Failed - Invalid Address For Write W 17:39:52 Retrying (19 of 20)... W 17:39:52 Retry Failed - Invalid Address For Write W 17:39:52 Retrying (20 of 20)... W 17:39:52 Retry Failed - Invalid Address For Write W 18:00:40 Retrying (21)... W 18:00:41 Retry Failed - Invalid Address For Write E 18:00:42 Failed to Write Sectors 96992 - 97023 - Write Error E 18:00:42 Next Writable Address: 0 I 18:00:42 Synchronising Cache... W 18:00:49 User opted to skip the 'Close Track/Session/Disc' functions. E 18:00:49 Failed to Write Image! I 18:00:49 Exporting Graph Data... I 18:00:49 Graph Data File: C:\Documents and Settings\Mike\Application Data\ImgBurn\IBG Files\LITE-ON_DVDRW_SOHW-1633S_BS0Y_MONDAY-MARCH-03-2008_5-38_PM_MKM-001-00_MAX.ibg I 18:00:49 Export Successfully Completed! E 18:00:49 Operation Failed! - Duration: 00:22:40 I 18:00:49 Average Write Rate: 147 KB/s (0.1x) - Maximum Write Rate: 3,604 KB/s (2.6x) I 18:00:53 Close Request Acknowledged I 18:00:53 Closing Down... I 18:00:53 Shutting down SPTI... I 18:00:53 ImgBurn closed! ;
blutach Posted March 5, 2008 Posted March 5, 2008 Either you have a bad batch of disks (unlikely, but it happens) or your drive is on the way out. Have you checked your DMA? Regards
MJG Posted March 5, 2008 Author Posted March 5, 2008 Either you have a bad batch of disks (unlikely, but it happens) or your drive is on the way out. Have you checked your DMA? Regards I thought about the drive being the culprit but did not want to believe that would be the problem. I presume your question regarding the DMA refers to the settings for the controller? If so I just rechecked the setting and DMA is enabled on the controller. Regarding the batch of media being bad, I have had failures recently from two separate spindles of Verbatim DL media so I am inclined to think that is not the issue. Based on your overall questions I guess you did not see anything in the log which would indicate that I have ImgBurn set up incorrectly? Thanks for the response.
dontasciime Posted March 5, 2008 Posted March 5, 2008 Windows may report DMA is fine but in reality Windoze lies sometimes. Check out the FAQ on the forum about how to reset DMA Also try a CD cleaner
MJG Posted March 8, 2008 Author Posted March 8, 2008 Either you have a bad batch of disks (unlikely, but it happens) or your drive is on the way out. Have you checked your DMA? Regards Well blutach, after your initial reply I decided to check out new drives and decided to purchase a sata interface Samsung S203B drive. I am now sorry I waited so long to replace my LiteOn. The Samsung arrived yesterday, I plugged it in and promptly burnt two DL discs (Verbs) without any hiccups. Thanks for giving me the nudge I needed to replace my drive. MJG
blutach Posted March 8, 2008 Posted March 8, 2008 Me, too. I messed around for a month and got that drive a few days ago. It's a winner. Regards
volvofl10 Posted March 8, 2008 Posted March 8, 2008 when buying verb DL media , try and get the MKM-OO1 dye ( like you have used in the log above ) ,preferably the ones made in Singapore. The ones made in India are not quite up to the same standard as the Singapore ones burn them at 2.4x
Recommended Posts