Jump to content

Recommended Posts

Posted

I 00:28:23 ImgBurn Version 2.4.0.0 started!

I 00:28:23 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)

I 00:28:23 Total Physical Memory: 523.760 KB - Available: 251.072 KB

W 00:28:23 Drive E:\ (FAT32) does not support single files > 4 GB in size.

I 00:28:24 Initialising SPTI...

I 00:28:24 Searching for SCSI / ATAPI devices...

I 00:28:24 Found 2 DVD

  • 7 months later...
Posted (edited)

i am have the same power calibration area error even after i updated the fw. i have no idea what to do next. my device is a lite-on dvdrw LH-20A1L (sata drive). previous fw was bl05, current fw after fw update is bl06. media typ being used is a yuden dvd. i have always burned movie dvds at 2.4x speed with dvd decrypter with old xp machine. new machine is vista 64bit, and i was using dvd decrypter but found out about imageburn and switched to it. however, i am unable to burn any dvds.

 

below is my imgburn log:

 

I 19:09:03 ImgBurn Version 2.4.2.0 started!

I 19:09:03 Microsoft Windows Vista Ultimate x64 Edition (6.0, Build 6001 : Service Pack 1)

I 19:09:03 Total Physical Memory: 4,191,504 KB - Available: 2,990,912 KB

I 19:09:03 Initialising SPTI...

I 19:09:03 Searching for SCSI / ATAPI devices...

I 19:09:03 Found 2 DVD

Edited by isamudysan
Posted

If you like to watch it burn slowly try at least 4x, but you may get better results using 8x or 12x. Notice the media is rated by the manufacturer for up to 16x, and newer burners are optimized (i.e. produce better quality burns) at higher speeds.

  • 1 month later...
Posted

im getting same problem can i plz get a answer as to how to fix this plz thank you

 

 

 

I 19:29:59 Average Write Rate: N/A - Maximum Write Rate: N/A

I 19:30:06 Operation Started!

I 19:30:06 Source File: C:\Documents and Settings\Chaz Tocheny\My Documents\Downloads\Dead.Space-RELOADED\rld-desp\rld-desp.iso

I 19:30:06 Source File Sectors: 3,901,047 (MODE1/2048)

I 19:30:06 Source File Size: 7,989,344,256 bytes

I 19:30:06 Source File Volume Identifier: DEADSPACE

I 19:30:06 Source File Application Identifier: UltraISO V8.5 CD & DVD Creator, © 2006 EZB Systems, Inc.

I 19:30:06 Source File File System(s): ISO9660

I 19:30:06 Destination Device: [0:0:0] LITE-ON DVDRW LH-20A1L BL06 (E:) (ATA)

I 19:30:06 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x, 4x, 6x, 8x)

I 19:30:06 Destination Media Sectors: 4,173,824

I 19:30:06 Write Mode: DVD

I 19:30:06 Write Type: DAO

I 19:30:06 Write Speed: 16x

I 19:30:06 Link Size: Auto

I 19:30:06 Test Mode: No

I 19:30:06 OPC: No

I 19:30:06 BURN-Proof: Enabled

I 19:30:06 Book Type Setting: DVD-ROM

I 19:30:06 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes

I 19:30:06 Optimal L0 Data Zone Capacity: 1,950,528

I 19:30:06 Optimal L0 Data Zone Method: ECC Block Boundary

E 19:31:16 Failed to set L0 Data Zone Capacity!

E 19:31:16 Reason: Power Calibration Area Error

E 19:31:20 Operation Failed! - Duration: 00:01:10

I 19:31:20 Average Write Rate: N/A - Maximum Write Rate: N/A

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.