Optimum Power Calibration Failed: - Reason: Power Calibration Area Error

[CaseyRoe]

Hi, please could someone help me! I am going stir crazy! I have to copy a load of sensitive data to dvd, and normally I have used Nero to do the job but it failed and another forum said that if I burned the image then used the wonderful imgburn to copy the img it would be ok. However, this fails too! The burner I am using has the most up to date drivers and the disks whilst not brilliant (Infiniti Professional DVD+R DL) have always worked before. The error file is below:

 

; //****************************************\\

; ImgBurn Version 2.4.0.0 - Log

; Wednesday, 12 March 2008, 18:09:22

; \\****************************************//

;

;

I 17:45:39 ImgBurn Version 2.4.0.0 started!

I 17:45:39 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 17:45:39 Total Physical Memory: 2,096,300 KB - Available: 1,549,192 KB

I 17:45:47 Initialising SPTI...

I 17:45:47 Searching for SCSI / ATAPI devices...

I 17:45:47 Found 2 DVD

[LIGHTNING UK!]

Just click 'Ignore' / 'Continue' when it pops up.

 

If you want it off forever, click Tools -> Settings -> Write tab -> Perform OPC Before Write.

 

You might want to slow the burn speed down a bit if MAX (i.e. 8x) doesn't work.

 

Also, check for firmware updates incase there are any.

[CaseyRoe]

Just click 'Ignore' / 'Continue' when it pops up.

 

If you want it off forever, click Tools -> Settings -> Write tab -> Perform OPC Before Write.

 

You might want to slow the burn speed down a bit if MAX (i.e. 8x) doesn't work.

 

Also, check for firmware updates incase there are any.

 

Thanks I will try that and pray that this time it works! Thanks for you time and help again.