Continual burn failures

[omgwtfbbq]

So I'm trying to put some DVD images onto some dual layer dvd's. Got me a new burner (old one wasnt detecting and form of disks (even verbatum). For these 2 logs I'm using TDK dual layer DVD+R dual layers, but i have tried verbatums.

Log 1

I 15:49:32 ImgBurn Version 2.4.0.0 started!

I 15:49:32 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 15:49:32 Total Physical Memory: 3,144,108 KB - Available: 2,375,896 KB

I 15:49:34 Initialising SPTI...

I 15:49:34 Searching for SCSI / ATAPI devices...

I 15:49:44 Found 1 DVD-ROM and 1 DVD

[LIGHTNING UK!]

You've got DMA issues.

 

Change the cable going to the drive and make sure it's as short as possible - avoid connecting it to a jmicron controller if you can.

 

Set the drive as master / slave, don't use cable select.

 

Follow the DMA post in the FAQ to uninstall the IDE controller from device manager and reboot.

[blutach]

I 15:55:54 Destination Media Type: DVD+R DL (Disc ID: CMC MAG-D02-00) (Speeds: 4x, 6x, 8x)

You also have media issues.

 

Change to Verbatims 2.4X, MKM-001s, Made in Singapore.

 

Regards