Ferrit Posted March 22, 2008 Share Posted March 22, 2008 Hey there not really sure whats happening but wanted to see if you guys knew of anything that I am doing wrong. I know that I dont have the best CD's and will change them to your favourite "VERBATAM" but the shops are shut at the moment. Thankyou I 12:32:10 ImgBurn Version 2.4.0.0 started! I 12:32:10 Microsoft Windows Vista Home Basic Edition (6.0, Build 6000) I 12:32:10 Total Physical Memory: 514,816 KB - Available: 134,884 KB I 12:32:10 Initialising SPTI... I 12:32:10 Searching for SCSI / ATAPI devices... I 12:32:10 Found 1 DVD Link to comment Share on other sites More sharing options...
blutach Posted March 22, 2008 Share Posted March 22, 2008 Welcome to ImgBurn Forum. I'm not sure of the quality of this drive. I see many threads over the web littered with problems. Your TYG02 media are just fine. Is there another drive you can try? Anyway, the drive is reporting it can't write to the power calibratin area of the disk (an initial write check). See also - http://forum.imgburn.com/index.php?s=&...ost&p=62127 Regards Link to comment Share on other sites More sharing options...
mmalves Posted March 22, 2008 Share Posted March 22, 2008 I think those TYG02 discs are fake, unless they're Taiyo Yuden, Verbatim or Sony branded. Link to comment Share on other sites More sharing options...
Ferrit Posted March 22, 2008 Author Share Posted March 22, 2008 Hey there I am about to get some new dvd"s should I get + or -? thank you for the link i went there and they had another link to upgrade my firmware but there was nothing there, so I am unfortunately at a loss again. please help it would be greatly appreciated! I'm not sure of the quality of this drive. I see many threads over the web littered with problems. Your TYG02 media are just fine. Is there another drive you can try? Anyway, the drive is reporting it can't write to the power calibratin area of the disk (an initial write check). See also - http://forum.imgburn.com/index.php?s=&...ost&p=62127 Link to comment Share on other sites More sharing options...
Cynthia Posted March 22, 2008 Share Posted March 22, 2008 There might be a later firmware for that burner if it's in a HP computer. Look at the last post in this thread http://www.cdr-zone.com/forum/about9559.html I guess it's a Philips rebadged Lite-On drive. Link to comment Share on other sites More sharing options...
Ferrit Posted March 22, 2008 Author Share Posted March 22, 2008 Hey there ummm I downloaded thet firmware and it didnt work and now I have no dvd drive, please get it back for me i need reel help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! please There might be a later firmware for that burner if it's in a HP computer. Look at the last post in this thread http://www.cdr-zone.com/forum/about9559.html I guess it's a Philips rebadged Lite-On drive. Link to comment Share on other sites More sharing options...
blutach Posted March 22, 2008 Share Posted March 22, 2008 Just redownload the firmware in the link in post 2. Take the disc out of the drive. Run the firmware patch and reboot. And, yes, the drive is a Philips-LiteOn SATA drive. Regards Link to comment Share on other sites More sharing options...
Ferrit Posted March 22, 2008 Author Share Posted March 22, 2008 hey there that link goes to another page then using the link there it takes me to nothing. im not sure what im missing here, sorry........ Just redownload the firmware in the link in post 2. Take the disc out of the drive. Run the firmware patch and reboot. And, yes, the drive is a Philips-LiteOn SATA drive. Link to comment Share on other sites More sharing options...
Cynthia Posted March 22, 2008 Share Posted March 22, 2008 I think you need to enter the model/id nr of your computer to get to the page with firmware downloads on the HP support page http://h10025.www1.hp.com/ewfrf/wc/static_...amp;dlc=en& Link to comment Share on other sites More sharing options...
Ferrit Posted March 22, 2008 Author Share Posted March 22, 2008 I think you need to enter the model/id nr of your computer to get to the page with firmware downloads on the HP support page http://h10025.www1.hp.com/ewfrf/wc/static_...amp;dlc=en& hey thanks for your link but it comes up with "your system dose not meet the minimum requirements for this update. update has been cancelled (9994)" HELP...........! thankyou Link to comment Share on other sites More sharing options...
Ferrit Posted March 22, 2008 Author Share Posted March 22, 2008 hey thanks for your link but it comes up with "your system dose not meet the minimum requirements for this update. update has been cancelled (9994)" HELP...........! thankyou Link to comment Share on other sites More sharing options...
Ferrit Posted March 22, 2008 Author Share Posted March 22, 2008 please help i am screwed! i dont know what to do now Link to comment Share on other sites More sharing options...
Ferrit Posted March 22, 2008 Author Share Posted March 22, 2008 I think you need to enter the model/id nr of your computer to get to the page with firmware downloads on the HP support page http://h10025.www1.hp.com/ewfrf/wc/static_...amp;dlc=en& please help i am screwed! i dont know what to do now Link to comment Share on other sites More sharing options...
Ferrit Posted March 22, 2008 Author Share Posted March 22, 2008 Just redownload the firmware in the link in post 2. Take the disc out of the drive. Run the firmware patch and reboot. And, yes, the drive is a Philips-LiteOn SATA drive. Regards please help i am screwed! i dont know what to do now Link to comment Share on other sites More sharing options...
blutach Posted March 22, 2008 Share Posted March 22, 2008 3 posts and a PM all saying the same thing. Take it easy man! Regards Link to comment Share on other sites More sharing options...
LOCOENG Posted March 22, 2008 Share Posted March 22, 2008 You didn't leave a disc in the drive when you flashed your drive did you? I downloaded thet firmware and it didnt work and now I have no dvd drive The drive no longer shows in My Computer? Does it show in device manager? If so uninstall the drive and reboot. Link to comment Share on other sites More sharing options...
Ferrit Posted March 22, 2008 Author Share Posted March 22, 2008 hey there i got it working, just going to cut my losses with the program and not try again thanks everyone for the help Link to comment Share on other sites More sharing options...
LOCOENG Posted March 22, 2008 Share Posted March 22, 2008 Your problems don't have anything to do with Imgburn, but good luck anyway. Link to comment Share on other sites More sharing options...
dontasciime Posted March 22, 2008 Share Posted March 22, 2008 Link to comment Share on other sites More sharing options...
Recommended Posts