doctadas Posted April 4, 2008 Posted April 4, 2008 So I've been using ImgBurn for a quite a while and have yet to experience a problem. Recently, however, none of my ISO images will burn to dvd. Everytime I put a blank dvd in (Memorex DVD+R.... I know you guys dont like that, but it hasnt given me any trouble up until now) I get an error message saying: "Failed To Reserve Track; Reason: Invalid Field in CDB" The log is posted below. I just recently upgraded to the new version of ImgBurn thinking that this would solve it, but it hasnt. I would really appreciate any help in solving this. Thanks alot for any help. I 19:23:41 ImgBurn Version 2.4.1.0 started! I 19:23:41 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2) I 19:23:41 Total Physical Memory: 523,248 KB - Available: 269,192 KB I 19:23:41 Initialising SPTI... I 19:23:41 Searching for SCSI / ATAPI devices... I 19:23:41 Found 1 DVD+RW! I 19:23:44 Operation Started! I 19:23:44 Source File: C:\Documents and Settings\DAS\Desktop\BNB.ISO I 19:23:44 Source File Sectors: 2,285,869 (MODE1/2048) I 19:23:44 Source File Size: 4,681,459,712 bytes I 19:23:44 Source File Volume Identifier: BNBDISC1 I 19:23:44 Source File Volume Set Identifier: 271658D1DVDSHRNK I 19:23:44 Source File Implementation Identifier: DVD Shrink I 19:23:44 Source File File System(s): ISO9660, UDF (1.02) I 19:23:44 Destination Device: [1:0:0] HL-DT-ST DVD+RW GCA-4040N 1.15 (D:) (ATA) I 19:23:44 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 2.4x, 4x) I 19:23:44 Destination Media Sectors: 2,295,104 I 19:23:44 Write Mode: DVD I 19:23:44 Write Type: DAO I 19:23:44 Write Speed: 2.4x I 19:23:44 Link Size: Auto I 19:23:44 Test Mode: No I 19:23:44 OPC: No I 19:23:44 BURN-Proof: Enabled I 19:23:44 Book Type Setting: DVD-ROM E 19:23:53 Failed to Reserve Track! - Reason: Invalid Field in CDB E 19:23:55 Operation Failed! - Duration: 00:00:10 I 19:23:55 Average Write Rate: N/A - Maximum Write Rate: N/A
Cynthia Posted April 5, 2008 Posted April 5, 2008 Hi and welcome to the forum, doctadas! Is that a burner in a HP computer? If so, there is a later firmware 1.19 do download from the HP site. That you haven't had the problem before could be that the setting 'DVD+R Reserve Track' was disabled as default in versions prior to 2.4.1.0. You could try to disable that setting. You find it in the 'Write' tab in the settings (Main Menu -> Tools -> Settings).
doctadas Posted April 5, 2008 Author Posted April 5, 2008 Hi Cynthia and thanks for the warm welcome. Before looking for the firmware update (i do have an HP comupter), I tried undoing the setting for the reserved track. After undoing this, I tried to burn another ISO but ImgBurn will not get past the Writing LeadIn stage. The write rate stays at 0x and does not proceed to the write image stage. An error appears that says: I/O Error! SciStatus: 0X02 Interpretation: Check Condition CDB: 2A 00 00 00 00 00 00 00 20 00 Interpretation: Write (10)- Sectors: 0-31 Sense Area: 70 00 03 00 00 00 00 0E 00 00 00 00 0C 80 00 00 Interpretation: Unknown (Write Error) (0x0C, 0x80) I dont really know what this all means. Maybe it will help you understand if its a firmware problem or dvd material problem. Thanks again for all of your help. I really appreciate it.
blutach Posted April 5, 2008 Posted April 5, 2008 It's just a normal write error. Get the firmware update and try again. And get better media. Regards
doctadas Posted April 5, 2008 Author Posted April 5, 2008 So I've updated the firmware to 1.19 and I receive the same message. Is it a dvd problem, or hopefully not, a hardware problem? Does anyone know whats going on because I am thoroughly confused. Thanks again for all of your help. New Log: I 20:48:55 ImgBurn Version 2.4.1.0 started! I 20:48:55 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2) I 20:48:55 Total Physical Memory: 523,248 KB - Available: 194,364 KB I 20:48:55 Initialising SPTI... I 20:48:55 Searching for SCSI / ATAPI devices... I 20:48:55 Found 1 DVD+RW! I 20:49:10 Operation Started! I 20:49:10 Source File: C:\Documents and Settings\DAS\Desktop\BNBDISC1.ISO I 20:49:10 Source File Sectors: 2,285,869 (MODE1/2048) I 20:49:10 Source File Size: 4,681,459,712 bytes I 20:49:10 Source File Volume Identifier: BNBDISC1 I 20:49:10 Source File Volume Set Identifier: 271658D1DVDSHRNK I 20:49:10 Source File Implementation Identifier: DVD Shrink I 20:49:10 Source File File System(s): ISO9660, UDF (1.02) I 20:49:10 Destination Device: [1:0:0] HL-DT-ST DVD+RW GCA-4040N 1.19 (D:) (ATA) I 20:49:10 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 2.4x, 4x) I 20:49:10 Destination Media Sectors: 2,295,104 I 20:49:10 Write Mode: DVD I 20:49:10 Write Type: DAO I 20:49:10 Write Speed: 2.4x I 20:49:10 Link Size: Auto I 20:49:10 Test Mode: No I 20:49:10 OPC: No I 20:49:10 BURN-Proof: Enabled I 20:49:10 Book Type Setting: DVD-ROM I 20:49:10 Filling Buffer... (20 MB) I 20:49:12 Writing LeadIn... W 20:49:26 Failed to Write Sectors 0 - 31 - Reason: Unknown (Write Error) (0x0C, 0x80) W 20:49:26 Retrying (1 of 20)... W 20:49:32 Retry Failed - Reason: Unknown (Write Error) (0x0C, 0x80) W 20:49:32 Retrying (2 of 20)... W 20:49:38 Retry Failed - Reason: Unknown (Write Error) (0x0C, 0x80) W 20:49:38 Retrying (3 of 20)... W 20:49:44 Retry Failed - Reason: Unknown (Write Error) (0x0C, 0x80) W 20:49:44 Retrying (4 of 20)... W 20:49:51 Retry Failed - Reason: Unknown (Write Error) (0x0C, 0x80) W 20:49:51 Retrying (5 of 20)... W 20:49:57 Retry Failed - Reason: Unknown (Write Error) (0x0C, 0x80) W 20:49:57 Retrying (6 of 20)... W 20:50:03 Retry Failed - Reason: Unknown (Write Error) (0x0C, 0x80) W 20:50:03 Retrying (7 of 20)... W 20:50:09 Retry Failed - Reason: Unknown (Write Error) (0x0C, 0x80) W 20:50:09 Retrying (8 of 20)... W 20:50:15 Retry Failed - Reason: Unknown (Write Error) (0x0C, 0x80) W 20:50:15 Retrying (9 of 20)... W 20:50:21 Retry Failed - Reason: Unknown (Write Error) (0x0C, 0x80) W 20:50:21 Retrying (10 of 20)... W 20:50:28 Retry Failed - Reason: Unknown (Write Error) (0x0C, 0x80) W 20:50:28 Retrying (11 of 20)... W 20:50:34 Retry Failed - Reason: Unknown (Write Error) (0x0C, 0x80) W 20:50:34 Retrying (12 of 20)... W 20:50:40 Retry Failed - Reason: Unknown (Write Error) (0x0C, 0x80) W 20:50:40 Retrying (13 of 20)... W 20:50:46 Retry Failed - Reason: Unknown (Write Error) (0x0C, 0x80) W 20:50:46 Retrying (14 of 20)... W 20:50:52 Retry Failed - Reason: Unknown (Write Error) (0x0C, 0x80) W 20:50:52 Retrying (15 of 20)... W 20:50:58 Retry Failed - Reason: Unknown (Write Error) (0x0C, 0x80) W 20:50:58 Retrying (16 of 20)... W 20:51:04 Retry Failed - Reason: Unknown (Write Error) (0x0C, 0x80) W 20:51:04 Retrying (17 of 20)... W 20:51:11 Retry Failed - Reason: Unknown (Write Error) (0x0C, 0x80) W 20:51:11 Retrying (18 of 20)... W 20:51:17 Retry Failed - Reason: Unknown (Write Error) (0x0C, 0x80) W 20:51:17 Retrying (19 of 20)... W 20:51:23 Retry Failed - Reason: Unknown (Write Error) (0x0C, 0x80) W 20:51:23 Retrying (20 of 20)... W 20:51:29 Retry Failed - Reason: Unknown (Write Error) (0x0C, 0x80) E 20:51:59 Failed to Write Sectors 0 - 31 - Reason: Unknown (Write Error) (0x0C, 0x80) I 20:51:59 Synchronising Cache... W 20:52:02 User opted to skip the 'Close Track/Session/Disc' functions. E 20:52:02 Failed to Write Image! E 20:52:02 Operation Failed! - Duration: 00:02:51 I 20:52:02 Average Write Rate: N/A - Maximum Write Rate: N/A
Cynthia Posted April 5, 2008 Posted April 5, 2008 Either try another brand of media or a new burner that like that brand of media. It's a rather old burner - 4-5 years old? Have you been able to burn that brand before without problems?
doctadas Posted April 5, 2008 Author Posted April 5, 2008 Either try another brand of media or a new burner that like that brand of media. It's a rather old burner - 4-5 years old? Yeah its about 5 years old. If it is the hardware, is there any reason why it would all of a sudden not work? Just asking for some sense of closure. Thanks everyone, for all of your help.
Cynthia Posted April 5, 2008 Posted April 5, 2008 I once had a burner that died for me between two burns. http://forum.digital-digest.com/showthread.php?t=49733 Back in those day it hurt as they were expensive. Today I can get 25 Lite-On writers for the same price as I paid for that one.
blutach Posted April 5, 2008 Posted April 5, 2008 I 20:49:10 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 2.4x, 4x) Do go get some Verbatims or Taiyo Yudens. Regards
doctadas Posted April 5, 2008 Author Posted April 5, 2008 I 20:49:10 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 2.4x, 4x) Do go get some Verbatims or Taiyo Yudens. Regards Thanks for the advice. Would you suggest one over the other, or do they both perform equally well?
weisborg Posted April 5, 2008 Posted April 5, 2008 Haven't used TYs yet, although I intend to at some point. All the Verbatims I get from Best Buy seem to be scuffed like all the CDs rubbed together. I've had really good luck with TDK though. So, personally I'd try TY or TDK. TY usually come in a pretty big bulk though, so I'd think they have a chance of rubbing too, although friends that use them say they are packaged really well and don't even turn to allow rubbing.
doctadas Posted April 5, 2008 Author Posted April 5, 2008 Either try another brand of media or a new burner that like that brand of media. It's a rather old burner - 4-5 years old? Have you been able to burn that brand before without problems? Yeah, ive never had a problem with the brand i've been using (Memorex). I actually just burned a dvd within the last 24 hours. Its only been the last couple of hours that I havent been able to get past the "Writing Lead-in" stage. Normally ImgBurn fills the buffer, then gives some random writing rate, then settles down to my specified write speed (2.4x). Today, is automatically starts on 0x and never changes.
simonh Posted April 5, 2008 Posted April 5, 2008 (edited) This may be of help doctadas: Taiyo Yuden FAQ Edit: Different link. Edited April 5, 2008 by simonh
doctadas Posted April 5, 2008 Author Posted April 5, 2008 so after updating the firmware and fiddling around with ImgBurn, I finally got the burn cycle to get past its initial stage (Writing Leadin) which it previously could not get past, and into the actual writing stage. I have encountered another problem however. It only writes for a few seconds at an extremely low rate (0.6x) and then encounters an error: Spindle Servo Failure. It sounds bad. Does this mean it is a hardware problem? Thanks for your help.
doctadas Posted April 5, 2008 Author Posted April 5, 2008 (edited) so after updating the firmware and fiddling around with ImgBurn, I finally got the burn cycle to get past its initial stage (Writing Leadin) which it previously could not get past, and into the actual writing stage. I have encountered another problem however. It only writes for a few seconds at an extremely low rate (0.6x) and then encounters an error: Spindle Servo Failure. It sounds bad. Does this mean it is a hardware problem? Also ImgBurn, when it loads now, keeps getting stuck on a process "Getting Disc Control Blocks Information" or something to that effect. Any idea why that may be? The errors keep cycling back and forth between Failed to Reserve Track/Invalid Field in CDB and the one previously stated (the write rate varies from a low 0.6x to the specified 2.4x). Also, I'm still able to burn CD's so is it necessarily the hardware thats the problem? Thanks for your help. Edited April 5, 2008 by doctadas
Cynthia Posted April 5, 2008 Posted April 5, 2008 Try another brand of discs, if that don't help - it's time for the extreme unction.
volvofl10 Posted April 6, 2008 Posted April 6, 2008 I 19:23:44 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 2.4x, 4x) from your log file. the discs your using use the CMC MAG ink/dye. This is known to be the most unreliable ink/dye thats on the market , very hit and miss. its NOT a hardware problem , do as advised above and get some decent blank media and try again
doctadas Posted April 6, 2008 Author Posted April 6, 2008 thanks for your help. i'll definitely get some TY's or verbatims. It just seems so weird to me that I've never had a problem with this media before and all of sudden none of these particular dvd's will work. Anyways, thanks again.
Recommended Posts