confused about this

[pirated]

Please accept my apologies if this has an easy fix and that i have missed the solution on the forum. I am a newb to the whole burning but when using dvdflick i let it run all night only to wake up to what i am guessing froze and not completed but yet if i close imgburn dvdflick says complete but there is nothing on the disk. The only (!) on the log is that C doesnt support ntfs. On dvdflick i have told it to goto D to do the work cause D is ntfs. On ImgBurn i haven't. Is there a setting i need or an area to change?? Thank you for the help.

 

 

I 23:50:09 ImgBurn Version 2.4.1.0 started!

I 23:50:09 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)

I 23:50:09 Total Physical Memory: 1,572,336 KB - Available: 1,072,548 KB

W 23:50:09 Drive C:\ (FAT32) does not support single files > 4 GB in size.

I 23:50:09 Initialising SPTI...

I 23:50:09 Searching for SCSI / ATAPI devices...

I 23:50:09 Found 1 DVD

[mmalves]

Find where DVD Flick saved the ISO image of your disc, right-click on it and choose Burn using ImgBurn

[pirated]

Thank you for replying. ImgBurn's Source is showing the correct location of the file though.it tells me to change to build so i built and then switched to write and ended up getting more problems.I am confused over this cause i have always used DVDFlix to do all the work. I havent had to manually do anything so i really have no idea what is the deal. I really love being able to use this program when it let's me but i have no direction in which to go. Please take a minute to direct me. Thanks again

 

I 11:11:51 ImgBurn Version 2.4.1.0 started!

I 11:11:51 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)

I 11:11:51 Total Physical Memory: 1,572,336 KB - Available: 1,084,752 KB

W 11:11:51 Drive C:\ (FAT32) does not support single files > 4 GB in size.

I 11:11:51 Initialising SPTI...

I 11:11:51 Searching for SCSI / ATAPI devices...

I 11:11:51 Found 1 DVD

Edited April 5, 2008 by pirated

[mmalves]

Follow this guide to burn your D:\DVD\dvd\dvd.iso file

[Falcon]

If I may add... FAT32 should NOT be used with XP or 2000. You might oughtta wanna run the convert tool on that drive to make it NTFS. It'll be faster, more reliable, and more stable

 

(Of course, then you should defrag it with a professional tool - Paragon Total Defrag is capable of rewriting and optimizing the MFT so it'll run even better)

[volvofl10]

If I may add... FAT32 should NOT be used with XP or 2000.

 

it CAN be used on XP or 2000 , but it is better to be using NTFS.

 

The limitations are that you cannot have a file larger than 4GB with FAT32.( for those who dont know, a DVD is usually larger than 4GB)

 

Most ACER brand machines still come formatted as FAT32

 

in the log file the letters on the left side mean, W = Warning , I = information , E = Error . so look for lines starting with E to find the real problm

W 11:11:51 Drive C:\ (FAT32) does not support single files > 4 GB in size.

I 11:11:51 Initialising SPTI...

I 11:12:27 Preparing Image...

E 11:12:27 File size exceeds the limit imposed by the ISO9660 file system.

E 11:12:27 Name: D:\DVD\dvd\dvd.iso

E 11:12:27 Size: 4,377,149,440 bytes

E 11:12:44 Operation Failed! - Duration: 00:00:16

I 11:12:56 Operation Started!

...

I 11:12:57 Preparing Image...

E 11:12:57 File size exceeds the limit imposed by the ISO9660 file system.

E 11:12:57 Name: D:\DVD\dvd\dvd.iso

E 11:12:57 Size: 4,377,149,440 bytes

E 11:13:00 Operation Failed! - Duration: 00:00:03

I 11:13:07 Operation Started!

I 11:13:07 Building Image Tree...

[pirated]

Thank you for the replies all. Help is always appreciated on my side

[blutach]

What you do now, is from the Windows desktop, press F1 and type in "Convert to NTFS". Follow the very simple instructions (the correct drive for you is C: - drive D: is OK) and in 5 minutes, you will have an NTFS partition which will be able to burn that ISO.

 

Regards

[LIGHTNING UK!]

Why are you trying to write your ISO in Build mode?

 

You need to switch to Write mode for that.