orion44 Posted April 8, 2008 Posted April 8, 2008 (edited) Hello, recently I burned the first DVD in my life onto a DVD+R using DVD Flick. I was so happy I went to Fry's and bought a 40 pack of DVD-R media. I used the last DVD+R I had to burn a dvd and then went again with a DVD-R disc and ImgBurn gives the following error: here is the log of succesful DVD+R burn and failed DVD-R burn: I 03:36:55 ImgBurn Version 2.4.1.0 started! I 03:36:55 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 03:36:55 Total Physical Memory: 1,048,048 KB - Available: 348,824 KB I 03:36:55 Initialising SPTI... I 03:36:55 Searching for SCSI / ATAPI devices... I 03:36:55 Found 1 CD-ROM and 1 DVD Edited August 20, 2008 by orion44
blutach Posted April 8, 2008 Posted April 8, 2008 I 03:39:51 Destination Media Type: DVD-R (Disc ID: CMC MAG. AM3) Sadly, you bought the cheapest nastiest rubbishiest media on the market. Go back and trade them for decent stuff like Verbatim or Taiyo Yuden. I 03:39:51 Destination Device: [1:0:0] _NEC DVD_RW ND-2510A 2.04 (D:) (ATA) Also, your firmware is years out of date - update it from here. Your burner is very old - be looking to get a new one in the next little bit. Regards
orion44 Posted April 8, 2008 Author Posted April 8, 2008 I 03:39:51 Destination Media Type: DVD-R (Disc ID: CMC MAG. AM3) Sadly, you bought the cheapest nastiest rubbishiest media on the market. Go back and trade them for decent stuff like Verbatim or Taiyo Yuden. I 03:39:51 Destination Device: [1:0:0] _NEC DVD_RW ND-2510A 2.04 (D:) (ATA) Also, your firmware is years out of date - update it from here. Your burner is very old - be looking to get a new one in the next little bit. Regards The firmware update enabled burning DVD-R with no problems! Thanks for your help!
Recommended Posts