DarkieJ Posted April 16, 2008 Share Posted April 16, 2008 I 15:28:18 Filling Buffer... (40 MB)I 15:28:25 Writing LeadIn... I 15:28:28 Writing Session 1 of 1... (1 Track, LBA: 0 - 3697695) I 15:28:28 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3697695) I 15:28:28 Writing Layer 0... (LBA: 0 - 1913759) W 15:49:38 Failed to Write Sectors 1860064 - 1860095 - Reason: Invalid Address For Write W 15:49:38 Retrying (1 of 20)... W 15:49:38 Retry Failed - Reason: Invalid Address For Write W 15:49:38 Retrying (2 of 20)... W 15:49:38 Retry Failed - Reason: Invalid Address For Write W 15:49:38 Retrying (3 of 20)... W 15:49:38 Retry Failed - Reason: Invalid Address For Write W 15:49:38 Retrying (4 of 20)... W 15:49:38 Retry Failed - Reason: Invalid Address For Write W 15:49:38 Retrying (5 of 20)... W 15:49:38 Retry Failed - Reason: Invalid Address For Write W 15:49:38 Retrying (6 of 20)... W 15:49:38 Retry Failed - Reason: Invalid Address For Write W 15:49:38 Retrying (7 of 20)... W 15:49:38 Retry Failed - Reason: Invalid Address For Write W 15:49:38 Retrying (8 of 20)... W 15:49:38 Retry Failed - Reason: Invalid Address For Write W 15:49:38 Retrying (9 of 20)... W 15:49:38 Retry Failed - Reason: Invalid Address For Write W 15:49:38 Retrying (10 of 20)... W 15:49:38 Retry Failed - Reason: Invalid Address For Write W 15:49:38 Retrying (11 of 20)... W 15:49:38 Retry Failed - Reason: Invalid Address For Write W 15:49:38 Retrying (12 of 20)... W 15:49:38 Retry Failed - Reason: Invalid Address For Write W 15:49:38 Retrying (13 of 20)... W 15:49:38 Retry Failed - Reason: Invalid Address For Write W 15:49:38 Retrying (14 of 20)... W 15:49:38 Retry Failed - Reason: Invalid Address For Write W 15:49:38 Retrying (15 of 20)... W 15:49:38 Retry Failed - Reason: Invalid Address For Write W 15:49:38 Retrying (16 of 20)... W 15:49:38 Retry Failed - Reason: Invalid Address For Write W 15:49:38 Retrying (17 of 20)... W 15:49:38 Retry Failed - Reason: Invalid Address For Write W 15:49:38 Retrying (18 of 20)... W 15:49:38 Retry Failed - Reason: Invalid Address For Write W 15:49:38 Retrying (19 of 20)... W 15:49:38 Retry Failed - Reason: Invalid Address For Write W 15:49:38 Retrying (20 of 20)... W 15:49:38 Retry Failed - Reason: Invalid Address For Write E 16:35:05 Failed to Write Sectors 1860064 - 1860095 - Reason: Invalid Address For Write E 16:35:05 Next Writable Address: 0 I 16:35:05 Synchronising Cache... I 16:35:09 Closing Track... I 16:35:10 Finalising Disc... E 16:35:11 Failed to Write Image! Please can someone explain what i must do to fix this i tryd everything to help this, The iso is good i got the settings right if im not wrong. Thanks for reading -Patrick Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted April 16, 2008 Share Posted April 16, 2008 Please provide the complete log, that one is missing important information. Link to comment Share on other sites More sharing options...
DarkieJ Posted April 16, 2008 Author Share Posted April 16, 2008 I 15:27:21 ImgBurn Version 2.4.1.0 started!I 15:27:21 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 15:27:21 Total Physical Memory: 2,095,532 KB - Available: 1,504,196 KB I 15:27:21 Initialising SPTI... I 15:27:21 Searching for SCSI / ATAPI devices... I 15:27:21 Found 1 DVD Link to comment Share on other sites More sharing options...
blutach Posted April 16, 2008 Share Posted April 16, 2008 I 15:27:26 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x, 6x, 8x) Change to high quality Verbatim, +R, 2.4x, MKM-001-00, Made in Singapore. A search would have shown you that this is the only DL media we recommend. The rest are unreliable. I 15:27:26 Destination Device: [0:0:0] LITE-ON DVDRW SHW-1635S YS0F (G:) (ATA) Also, update your firmware - yours is a long time out of date - http://forum.rpc1.org/dl_firmware.php?download_id=2141 Regards Link to comment Share on other sites More sharing options...
DarkieJ Posted April 17, 2008 Author Share Posted April 17, 2008 I tryd it again with new firmware but it did not work for me, And de dvd's are tdk i think that are good enough. got the log for you meaby can you help me! I 14:37:27 ImgBurn Version 2.4.1.0 started! I 14:37:27 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 14:37:27 Total Physical Memory: 2,095,532 KB - Available: 1,680,012 KB I 14:37:27 Initialising SPTI... I 14:37:27 Searching for SCSI / ATAPI devices... I 14:37:28 Found 1 DVD Link to comment Share on other sites More sharing options...
dontasciime Posted April 17, 2008 Share Posted April 17, 2008 Try a different IDE cable make sure it is 80 wire one. Check which drivers are in use for IDE and update them or if using nforce uninstall and use standard ms drivers for ATA etc. ~(or just use standard ms drivers regardless of controller) If your board is using Jmicron then there are issues with slowness unless you use their updated driver) BTW those TDK disc's are Crap get Verbatim 2.4x ones as advised by Blutach Link to comment Share on other sites More sharing options...
DarkieJ Posted April 17, 2008 Author Share Posted April 17, 2008 Ok! im on it, I will update it soon when i have things set. Link to comment Share on other sites More sharing options...
blutach Posted April 17, 2008 Share Posted April 17, 2008 I'm sure you'll have more success with them. Regards Link to comment Share on other sites More sharing options...
LOCOENG Posted April 18, 2008 Share Posted April 18, 2008 And de dvd's are tdk i think that are good enough Famous last words... Some can get away with using the lower quality stuff, but when firmware and all else don't produce positive results it's down to the media. Good luck and happy burning. Link to comment Share on other sites More sharing options...
DarkieJ Posted April 18, 2008 Author Share Posted April 18, 2008 Try a different IDE cable make sure it is 80 wire one. Check which drivers are in use for IDE and update them or if using nforce uninstall and use standard ms drivers for ATA etc. ~(or just use standard ms drivers regardless of controller) If your board is using Jmicron then there are issues with slowness unless you use their updated driver) BTW those TDK disc's are Crap get Verbatim 2.4x ones as advised by Blutach I will try it with the better dual layer dvd's when i got them, I tried to find what kind of driver i use and i use just the m$ ones i think that is good enough isn't it? eh btw Really Thanks for helping everyone here. Link to comment Share on other sites More sharing options...
DarkieJ Posted April 20, 2008 Author Share Posted April 20, 2008 can someone help me with this Link to comment Share on other sites More sharing options...
mmalves Posted April 20, 2008 Share Posted April 20, 2008 can someone help me with this You're still having the same problem? Are you using Verbatim 2.4x MKM-001-00 Made in Singapore blanks? Please post a recent log Link to comment Share on other sites More sharing options...
DarkieJ Posted April 23, 2008 Author Share Posted April 23, 2008 Oke i got it:) It worked good when i used Verbatim double layer ty for support you guys! Link to comment Share on other sites More sharing options...
LOCOENG Posted April 23, 2008 Share Posted April 23, 2008 Happy burning Link to comment Share on other sites More sharing options...
Recommended Posts