Jump to content

Recommended Posts

Posted

I was making a game backup,but it won't work. I selected the .dvd file too I have no idea what's happening.

 

I 15:11:52 Read Speed: 2.4x

W 15:11:52 [3:0:0] LITE-ON DVDRW SHW-160P6S PGS1 (E:) (ATA) - Selected Read Speed: 3,324 KB/s (2.4x)

W 15:11:52 [3:0:0] LITE-ON DVDRW SHW-160P6S PGS1 (E:) (ATA) - Actual Read Speed: 15,512 KB/s (11.5x)

I 15:11:52 Verifying Sectors... (LBA: 0 - 3825923)

I 15:11:52 Verifying Layer 0... (LBA: 0 - 1913759)

W 16:04:55 Failed to Read Sector 292796 - L-EC Uncorrectable Error

E 16:06:31 Failed to Read Sector 292797 - L-EC Uncorrectable Error

E 16:06:31 Failed to Verify Sectors!

E 16:06:33 Operation Failed! - Duration: 00:54:39

I 16:06:33 Average Verify Rate: 178 KB/s (0.1x) - Maximum Verify Rate: 3,439 KB/s (2.5x)

Posted (edited)

I 14:27:18 ImgBurn Version 2.3.2.0 started!

I 14:27:18 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2)

I 14:27:18 Total Physical Memory: 2,062,764 KB - Available: 1,407,840 KB

W 14:27:18 Drive D:\ (FAT32) does not support single files > 4 GB in size.

I 14:27:18 Initialising SPTI...

I 14:27:18 Searching for SCSI / ATAPI devices...

I 14:27:18 Found 1 DVD-ROM and 1 DVD

Edited by y0ungSir
Posted

Hi and welcome to the forum, y0ungSir! :)

 

I 14:30:19 Destination Device: [3:0:0] LITE-ON DVDRW SHW-160P6S PGS1 (E:) (ATA)

According to LiteOn there is a later firmware - that might give you better result with this media.

 

http://www.liteonit.com.tw/DOWNLOADS/ODD/S...rmware/PS0C.zip

 

If you flash:

 

No disc in the drive

All other programs closed

The tray closed

 

Then restart the computer after the flash

 

Also there is a later version of the ImgBurn program to install.

 

:)

Posted
Hi and welcome to the forum, y0ungSir! :)

 

According to LiteOn there is a later firmware - that might give you better result with this media.

 

http://www.liteonit.com.tw/DOWNLOADS/ODD/S...rmware/PS0C.zip

 

If you flash:

 

No disc in the drive

All other programs closed

The tray closed

 

Then restart the computer after the flash

 

Also there is a later version of the ImgBurn program to install.

 

:)

 

Okay I'll try that now. I just gor the newest IMGBurn and I'll try this I just have one more question. Before I burn it again do I select the .dvd(that's what I've been doing) or do I select the iso?

Posted

As it is a game (I'm not to good with that stuff) the .dvd file holds the layer break - so select that one.

 

I 14:30:19 User Specified L0 Data Zone Capacity: 1,913,760
Posted

@LOCOENG I updated.

 

@Cynthia Thanks for the help and I figured out what the problem was when I ran out to best buy to buy some disks. The disk had was defective lol. It was the last one out my 20pck so it had major damage. It worked with the new disc after I updated. Thank You. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.