juandan Posted April 29, 2008 Posted April 29, 2008 how do I Enable "DMA" I've looked at this tutarial http://www.dvdplusvideo.com/dvdguide005.html my system, motherboard Asus M2V-MX, cpu Athlon 64 X2 dual-core, 2Gb ram, OS winxp home, when I double click on primary channel, Transfer mode says dma if available but current transfer mode says not applicable its the same in both primary and secondary channels I'm having problems burning a movie in any burning software I've uninstalled primary and secondary channel and rebooted but things are just the same, can you please tell me another way I can get DMA enabled snapshot
spinningwheel Posted April 29, 2008 Posted April 29, 2008 Try this, and read the stuff in PINK above this topic...
juandan Posted April 29, 2008 Author Posted April 29, 2008 (edited) Hi thanks for your help, I can't uninstall the IDE/ATA controller, I can see it but it doesn't give me an option to uninstall it, here is a snapshot of my device manager Edited April 29, 2008 by juandan
Cynthia Posted April 29, 2008 Posted April 29, 2008 I think you should check in the BIOS setting to see how it's set up there.
blutach Posted April 29, 2008 Posted April 29, 2008 See the FAQ and the link in my signature. Regards
juandan Posted April 30, 2008 Author Posted April 30, 2008 I don't know if this helps but all my drives are sata drives, hdd, dvd-rw, dvd-rom, do they still use IDE/ata controllers? I don't know I'm just a novice
Cynthia Posted April 30, 2008 Posted April 30, 2008 As you haven't anything attached to those IDE controllers - there is no DMA status to report. You can right click on the VIA ATA Channel and select properties in the tab Advanced settings there should be a DMA option.
juandan Posted April 30, 2008 Author Posted April 30, 2008 As you haven't anything attached to those IDE controllers - there is no DMA status to report. You can right click on the VIA ATA Channel and select properties in the tab Advanced settings there should be a DMA option. If I right click on VIA channel the select properties this what I get
dontasciime Posted April 30, 2008 Posted April 30, 2008 You need to click on Primary and Secondary and then the advanced tab
juandan Posted April 30, 2008 Author Posted April 30, 2008 (edited) You need to click on Primary and Secondary and then the advanced tab I've done that, its the same with secondary channel note current transfer mode, not applicable Edited April 30, 2008 by juandan
dontasciime Posted April 30, 2008 Posted April 30, 2008 Which version hyperion drivers are you using? Also next time you install windows maybe set the sata in bios to IDE or AUTO instead of AHCI (if that is how you have it set now) latest Via chipset drivers http://www.viaarena.com/Driver/via_hyperionpro_v517a.zip
juandan Posted April 30, 2008 Author Posted April 30, 2008 (edited) Which version hyperion drivers are you using? Also next time you install windows maybe set the sata in bios to IDE or AUTO instead of AHCI (if that is how you have it set now) latest Via chipset drivers http://www.viaarena.com/Driver/via_hyperionpro_v517a.zip thanks for your help I've installed the VIA chipset drivers I'll post back later Edited April 30, 2008 by juandan
juandan Posted April 30, 2008 Author Posted April 30, 2008 Which version hyperion drivers are you using? Also next time you install windows maybe set the sata in bios to IDE or AUTO instead of AHCI (if that is how you have it set now) latest Via chipset drivers http://www.viaarena.com/Driver/via_hyperionpro_v517a.zip thanks for your help I've installed the VIA chipset drivers I'll post back later I can burn a video file with Imgburn but not with nero
weisborg Posted May 1, 2008 Posted May 1, 2008 I was going to say the same thing, but I've been overtime on Nero bashing, so took a break. It sounds like there may still be some DMA issues though. I never liked VIA drivers too much either. Nero has been a mess too...I had to install it to use the MP3 conversion stuff and it added a bogus/corrupt entry to my autoplay options I need to fix now. If he can burn with ImgBurn at least he has something though.
blutach Posted May 1, 2008 Posted May 1, 2008 If you look at his thread on D9, there doesn't appear to be a real problem in respect of burn speed. Plus juandan, you should update to ImgBurn 2.4.1.0. Regards
juandan Posted May 1, 2008 Author Posted May 1, 2008 If you look at his thread on D9, there doesn't appear to be a real problem in respect of burn speed. Plus juandan, you should update to ImgBurn 2.4.1.0. Regards Thanks for all the help, I think I'll just stick with the excellent Imgburn, I just couldn't understand how Nerovision couldn't burn the same video file that Imgburn could burn, I just wanted to solve the problem, thank again for all the help. regards Dan
Recommended Posts