How can I verify I have Booktype set to DVD-ROM?

[Seahawk3]

Hello,

 

I set my booktype to DVD-ROM and I'm using +R. I have a Sony and used the Lite-On tab to set it. First someone told me it was a LG drive, but I can't set that - it tells me Unknown Failed! so I checked some more and found a web site that lists the drive as a Lite-On so that's what I used. When I go to burn, all the info scrolls down and shows the booktype DVD+R instead of DVD-ROM. Did it not take my settings or is that normal? I copied the info below. Thanks so much for your help.

 

SONY DVD RW DRU-720A JY01 (ATA)

Current Profile: DVD+R

 

Disc Information:

Status: Empty

Erasable: No

Free Sectors: 2,295,104

Free Space: 4,700,372,992 bytes

Free Time: 510:03:29 (MM:SS:FF)

Supported Write Speeds: 6x, 8x, 12x, 16x

 

Physical Format Information (ADIP):

Disc ID: MBIPG101-R05-01

Book Type: DVD+R

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

Track Path: Parallel Track Path (PTP)

Linear Density: 0.267 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 2,491,711

Last Physical Sector in Layer 0: 0

 

Physical Format Information (Last Recorded):

Disc ID: MBIPG101-R05-01

Book Type: DVD+R

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

Track Path: Parallel Track Path (PTP)

Linear Density: 0.267 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 2,491,711

Last Physical Sector in Layer 0: 0

[Cynthia]

Try to add it to the Advanced OEM list as shown in this guide section 4.2.12.2 Advanced

[blutach]

Current Profile: DVD+R

 

Disc Information:

Status: Empty

The booktype can't be changed until the disc is burned.

 

Regards