Seahawk3 Posted May 2, 2008 Posted May 2, 2008 Hello, I set my booktype to DVD-ROM and I'm using +R. I have a Sony and used the Lite-On tab to set it. First someone told me it was a LG drive, but I can't set that - it tells me Unknown Failed! so I checked some more and found a web site that lists the drive as a Lite-On so that's what I used. When I go to burn, all the info scrolls down and shows the booktype DVD+R instead of DVD-ROM. Did it not take my settings or is that normal? I copied the info below. Thanks so much for your help. SONY DVD RW DRU-720A JY01 (ATA) Current Profile: DVD+R Disc Information: Status: Empty Erasable: No Free Sectors: 2,295,104 Free Space: 4,700,372,992 bytes Free Time: 510:03:29 (MM:SS:FF) Supported Write Speeds: 6x, 8x, 12x, 16x Physical Format Information (ADIP): Disc ID: MBIPG101-R05-01 Book Type: DVD+R Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,491,711 Last Physical Sector in Layer 0: 0 Physical Format Information (Last Recorded): Disc ID: MBIPG101-R05-01 Book Type: DVD+R Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,491,711 Last Physical Sector in Layer 0: 0
Cynthia Posted May 2, 2008 Posted May 2, 2008 Try to add it to the Advanced OEM list as shown in this guide section 4.2.12.2 Advanced
blutach Posted May 2, 2008 Posted May 2, 2008 Current Profile: DVD+R Disc Information: Status: Empty The booktype can't be changed until the disc is burned. Regards
Recommended Posts