Need help with explaining the reason of choosing burning speed

[Kevin Yao]

Hi, every one......

First, thanks Imgburn, this is a very useful tool. Thanks for the author.

 

Nowadays, I got a problem with burning GTA IV for xbox 360. I successfully burn DVD+R (VERBATIM 8.5 Singapore) with 4x speed burning speed but it was unsuccessful when I first choosing burning speed with 2.4x.

 

It got some kind of logic sector problem and time out problem with using 2.4x.

 

Now, I would like to ask why did this happen? I am using Laptop of Asus G2PC. The Burning DVD is HL-DT-ST DVDRAM GSA-T10N which is made by LG.

 

Also, I would like to know is there any differences between disks which made by 4x and 2.4x.

Did the disk which made by 2.4x run more smoothly in XBOX360? or Xbox360 could easily read the disk made by 4X.

 

//****************************************\\

; ImgBurn Version 2.4.1.0 - Log

; 星期六, 10 五月 2008, 21:11:39

; \\****************************************//

;

;

I 14:19:33 ImgBurn Version 2.4.1.0 started!

I 14:19:33 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 3)

I 14:19:33 Total Physical Memory: 2,096,428 KB - Available: 1,413,024 KB

I 14:19:34 Initialising SPTI...

I 14:19:34 Searching for SCSI / ATAPI devices...

I 14:19:34 Found 1 DVD

Edited May 10, 2008 by Kevin Yao

[mmalves]

Please post the log(s) from the failed burn(s). You can find it at Help/ImgBurn Logs

[Kevin Yao]

Please post the log(s) from the failed burn(s). You can find it at Help/ImgBurn Logs

thanks for your suggestion. I have already post imgburn log for failed burning.

[dontasciime]

See Asus about a firmware update to LG drive or LG (I had a quick look and found nothing)

 

At least you can burn them @4x and if they work that is all that matters.